máquinas de enchimento usadas para venda (865)

Siebler + Goering (Grupo CAM) SP-2 máquina de bastões em versão de 2 faixas com dosagem volume/lâmina adequada para pós e grânulos em fluxo livre com funil e agitador, largura possível máxima de 60 mm (com peças de formato correspondente), comprimento possível máximo de 150 mm (ajustável), incluindo peças de formato para largura de 40 mm (largura do filme 190 mm, diâmetro do tubo de enchimento 24 mm), controlo ótico de imagem de impressão para centralização de filme, B&R PLC com painel tátil, ligação elétrica 400V/50Hz/16A, ar comprimido 6 bar (aprox. 500 NL/min.), área de 1082 x 1106 mm (LxD), altura da máquina incluindo funil aproximadamente 2228 mm, saída até 120 varas por minuto

Aseptic carton filler previously used for the filling of aseptic milk products in cartons. The Tetra Pak Tetra Brik Aseptic 8 (TBA 8) carton filler is designed for 1.000 ml Slim cartons. Controls: 100V. Electrical diagram: 648022-1001. Production hours: 28.887 hours. Including ± 5 meter of outfeed conveyor. The machine has been running in in a milk factory / dairy in Europe. Machine still located in the factory., Type of Machine: Aseptic carton filler, Capacity (Units): 6.000 cartons per hour, Packaging: 1.000 ml Slim, Product: Milk, Controls: 100 V, Conveyors: Yes, Accumulator: No, Cap Applicator: No, Card board packer: No, Working Hours: 28.887 h, Electric: 400/230 Volt - 50 Hz

System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg., Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on con ...

Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place., Additional title: weight-based filling, Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity, Power: 11 kW, Voltage: 400 V, Frequency: 50 Hz, Heating / Cooling: steam 3 bar; 10 kg/h, Compressed air: 6-8 bar; Qmax = 300 l/min, Length: 3708 mm, Width: 968 mm, Height: 2442 mm, Formats: 1.3-l ...

Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type ML667) - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system), Additional title: hot filling, with pasteurisation, Capacity: 5000 bo/h, Formats: 0.25 liter bottles, twist off caps, Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler

for water, lemonades and fruit spritzers. : 0.5 L, 1.0 L, 1.5 L : 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bottles are packed in PETCYCLE crates. The used bottles that come back with the empties are removed from the crates at the ejector and sent for disposal. (Shredder is no longer available.) The new bottles are destacked pallet by pallet at the new bottle depalletiser and transported pneumatically to the rinser. The system consists of - - Manufacturer: Year of construction: 2001 - Manufacturer: Year of construction: 2001 - Manufacturer: & Year of construction: 1978 with downstream Velcorin dosing system - : - /, / Manufacturer: Year of construction: 2001 with chlorine dioxide and sterile water rinsing - -- Manufacturer: Year of manufacture: 2001 with Alcoa screw capper and liquid nitrogen dosing system -  ...

Capper for aluminum screw caps. Capacity: approx. 14,000 bph. Suitable for capping NRW glass bottles with aluminum screw caps., Additional title: aluminum screw caps, Capacity approx.: 20000 bottles/h, Length: 1,9 m, Width: 1,25 m, Height: 2.2 m, Features: 8 capping heads

Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, pipi ...

Precise fill level control for detecting underfilling and overfilling of bottles., P max: 10 bar, Current: 8 A, Voltage: 230 V, Frequency: 50 / 60 Hz, Length: 1,2 m, Width: 0,93 m, Height: 2,2 m, Weight: 350 kg, Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table

Manual barrel filling machine for the filling of bunghole barrels with lateral bunghole, horizontal filling of barrels., Width: 0,9 m, Height: 2,9 m, Weight: 200 kg, Formats: bunghole barrels with lateral bunghole, barrels filled horizontally, Material: stainless steel

Semi-automatic rotary system with four fill/cleaning heads. Suitable for: - processing of 15, 20, 25, 30 and 50 l kegs as well as 20 l containers - beer - lemonades (without fruit pulp) - Coca-Cola drinks - premix and postmix - water - wine, Additional title: Rotokeg, Capacity up to: 50 KEG/h at 50 l KEGs and 25 hl/h beer, Length: 1495 mm, Width: 1495 mm, Height: 2400 mm, Formats: keg types: volume: 15-50 l; diameter: 230-405 mm; height: 320-620 mm, Operation / Control: Siemens Simatic S5

Four-station filling system for large cans and bottles., Additional title: Siphon filler, Capacity: 200 Fl/h, Filling places: 4 pieces, Power: 100 W, Voltage: 230 V, Frequency: 50 Hz, Length: approx. 1,3 m, Width: approx. 0,75 m, Height: approx. 2 m, Formats: 5 l Party cans; 2 l siphon bottle, Features: The containers are pressurized before filling, CIP pipes

Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling., Additional title: cleaning and filling, Capacity: 60 Keg/h each 50 l, Operation / Control: Siemens S7-300, Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

Carousel for sealing swing-top bottles., Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device

Linha completa de embalagem para produtos líquidos/semelhantes a gel em sticks, composta por: Inever PH6/8 - máquina de 8 faixas com 8 bombas de dosagem de lóbulos rotativos, atualmente equipada para paus com largura de 23 mm e comprimento máximo de 160 mm, volume de enchimento 10–14 ml, com componentes de formato apropriado que podem ser processados, diâmetro do rolo 600 mm, largura do rolo 640 mm, equipada com dispositivo de codificação Allen multi-faixa, eletricidade. Ligação 400 V/3 Ph/50/60 Hz, eletricidade. Consumo de energia 10 kW, pressão do ar 6 bar, footprint da máquina aproximadamente 2200 x 2100 mm (L x W), altura da máquina aproximadamente 3100 mm, peso líquido da máquina aproximadamente 2850 kg. Máquina de embalagem horizontal Enflex ENF11, operação intermitente, formato de caixa dobrável varia de 50 x 50 x 15 mm a 125 x 180 x 40 mm (ou 125 x 140 x 60  ...

Two identical filling machines are available. Output capacity for 100ml, 500ml, 1000ml containers: 17-18/min, output capacity 5000ml containers: 9-10/min, transport pitch: 317.5 mm, equipped with an operator panel, can separator, lid placer, lid closing unit and documentation. The machines are still new and unused. An on-site inspection is possible.

Plástico Usado - Máquina de Encher e Selar Tubos Fabricante: TGM Tipo E250 MATIC Ano de construção: 2006 Capacidade: 800 – 3.200 tubos / hora Altura do tubo: 50 – 235 mm Diâmetro: Ø 10 mm – 50 mm Fecho: Dispositivo de ar quente (HA) Estação de Carregamento do Tubo com Paiol de Munições, Alinhamento do Tubo, Tubo de Controlo de Presença, Centralização de tubos, estação de abastecimento, grupo de ar quente, codificação de tubos, estação de corte de tubos, saída de válvulas, Vários conjuntos de formatos e peças sobressalentes

Max. discharge volume: 4000cm³, net hopper volume: 1500cm³, stainless steel construction, corrosion protected, version with memory storage hoppers, circular multihead weighing system operating according to the partial quantity combination principle. Design features: chassis, frame, modules and product contact parts made of V2A, easy cleaning through enclosed design with load cells and vibratory drives integrated into the housing, electrical components integrated into the scale frame. Equipment: central product distributor with vibratory drive, inclination angle 20°, vibratory feed chutes with quick-release fasteners, dosing hoppers with motor-operated opening flaps, each driven by a separate motor, weighing hoppers with double-flap design and motor-operated opening flaps, each driven by a separate motor, all hoppers without flap return springs, storage hoppers arranged below the weigh ...

A Vemag portioning and vacuum filling machine is available. 1) Vemag Robot 500 filling machine, year of manufacture: 2021, programs: 500, max. portioning speed: 450/min, portioning range: 1g-100000g, adjustment increment: 0.1g, max. conveying capacity: approx. 2800kg/h, hopper diameter: 120mm, hopper volume: 230l, max. lifting device load capacity: 250kg, operating hours: approx. 400h. 2) Piab vacuum unit, suction capacity: 21m³/h. 3) Vemag ASV 811 cutting device, year of manufacture: 2021, outlet shape: oval, arrangement: vertical, max. inclination: 20°, filling tube holder: Z design, weight: approx. 50kg. Including special nozzles in teddy shape and oval shape. Documentation vorhanden. An on site inspection is possible.

Krones PET Block 54/8 Monobloc Filler–Capper – OverviewThe Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling.Technical Specifications & Performance DataConfiguration: Monobloc Filler–Capper (filler + capper; no rinser module)Filling technology: Isobaric, fixed-valve counter‑pressureNumber of filling valves: 54Valve pitch (center distance): 126 mmCapper: 8-head rotary screw capper for plastic closuresNeck finish: PCO 1881 (short finish) – plastic screw capsBottle materials: PETNomi ...

Continuously adjustable dosing volume: 60-1050ml, length: 1750mm, width: 650mm, height: 1700mm. Equipment: mounted on a stainless steel frame, mobile with four swivel castors, manual feeding and removal of bottles, self-priming, with a dipping device for the filling tube, automatic circulation cleaning, homogenizing and refining of curd possible, usable products: liquid, pasty, cold and hot milk, yogurt, curd, cream cheese, fondue, honey, salad dressings, mayonnaise, jam, cake batter etc. An on-site inspection is possible, not under power.

Twelve dosing systems with volumetric progressive cavity pumps ViscoTec (Z and L versions) with collection hopper are available. Dosing volume range: 7.5ml/rev, flow rate range: 75ml/min-937.5ml/min, dosing accuracy: +/-1%, max. speed: 125rpm, max. dosing pressure: 30bar, max. inlet pressure: 10bar. Documentation available. An on-site inspection is possible.

A large-format can filling and closing machine JBT FoodTech from the food industry is available. Can weight: 750g/1000g, can content: sweetened condensed milk, max. throughput capacity: 600cans/min, filling heads: 22, closing heads: 5, design: monoblock, control system: Siemens. Documentation available. An on-site inspection is possible.

A fully automatic Ferrum can filling and sealing machine is available. Can weight: 397g, can content: sweetened condensed milk, sealing heads: 6, throughput capacity: approx. 250cans/min, machine dimensions X/Y/Z: approx. 2300mm/1550mm/2300mm, weight: approx. 3500kg. The filling bowl has been repaired several times. Documentation available. An on-site inspection is possible. Expected to be available around September 2026.

A modular bucket filling and lidding system Wittmann Robot Systeme is available. Components: bucket stack feeding, bucket stack transfer unit, bucket singulation, rake and filling, stopper, lid feeding, lidding, lid inspection and rotation for the further conveying processes. Number of formats: 6, format distribution round/rectangular, round bucket diameter: 226mm, round bucket height: 194mm, min. rectangular bucket dimensions X/Y/Z: 195mm/299mm/170mm, max. rectangular bucket dimensions X/Y/Z: 302mm/415mm/220mm, bucket volume: 5l/6l/10l/11l/16l. Including the corresponding conveyor units and motors. Documentation available. An on-site inspection is possible.

Transportador de vácuo PIAB C3304-600 – Aço Inoxidável Venda transportadora a vácuo PIAB tipo C3304-600, ideal para pós e materiais a granel (alimentares, farmacêuticos, químicos). AISI 316L em aço inoxidável Capacidade de transporte até aproximadamente 10–15 t/h Operação pneumática Sistema de filtros até 0,3 μm Silencioso e de baixa manutenção Usado, em bom estado. Visualização possível mediante acordo.

Simon Freres Simple Butter bulk packing is a semi-automatic 2-head filling machine designed for the bulk filling of boxes with butter type products into cartons. Currently this machine is set for carton boxes of 10 kg butter blocks. CIP Cleanable. Working principle: pre fold a carton box, manually place the box on the table of the machine, box has to be lined with a protective foil bag, box automatically moved up under the filling nozzle (opening of the foil bag is needs to be manually places around the filling nozzle), product is filled, table moves down until the required level of product, filled box moved manually. 1 head can be in filling position, while you replace the box on the other station. Pneumatic driven., Type of Machine: Butter Packing Machine, Capacity: up to 2.000 kg of butter per hour (output depending on block format), Box weight: 10 kg, Dimensions: 150 x 150 x 130 cm,  ...

Consiste numa máquina de enchimento REX TR/27 de 500ml e 1000ml com um Tetra Pak Cartboard Packer TCBP32. Além disso, estão disponíveis correias transportadoras individuais para esta linha, de acordo com o layout dos clientes. Com estas máquinas, têm uma linha de produção completa.

Consiste numa máquina de enchimento de 8 LSC TBA 1000ml com um Tetra Pak TrayPacker TCBP70, Tetra Pak Screw Cap TCAP 47 e um Tetra Pak Tray Shrink 51. Além disso, estão disponíveis correias transportadoras individuais para esta linha, de acordo com o layout dos clientes. Com estas máquinas, têm uma linha de produção completa.

Consiste numa máquina de enchimento TTB 19 de 250 ml com um empacotador de cartão Tetra Pak CBP32 V400 e um Aplicador de Palhinha Tetra Pak SA 30. Além disso, estão disponíveis correias transportadoras individuais para esta linha, de acordo com o layout dos clientes. Com estas máquinas, têm uma linha de produção completa.