máquinas injetoras usadas para venda (810)

Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for high rigidity and precision Platen Area: Large platen  ...

Injection Unit Engine not working Screw Diameter: 65 Ø Injection Volume: approx. 1,025 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 450 cm³/s Plasticizing Capacity: approx. 80 g/s (PS) Nozzle Contact Force: 100 kN Clamping Unit Clamping Force: 5,000 kN (500 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,300 × 1,200 mm Mould Opening Stroke: 800 mm Max. Daylight Opening: approx. 1,400 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 90 / 60 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 37 kW Total Installed Power: approx. 55 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for high rigidity and space efficiency Energy Efficie ...

Injection Unit Screw Diameter: Ø 55 Injection Volume: approx. 517 cm³ Injection Pressure: up to 2,000 bar Injection Rate: approx. 220 cm³/s Plasticizing Capacity: approx. 35 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 60 kN Clamping Unit Clamping Force: 2,300 kN (230 t) Clamping System: Zhafir Zeres all-electric toggle system Platen Size (H × V): approx. 850 × 800 mm Mould Opening Stroke: 470 mm Max. Daylight Opening: approx. 940 mm Min. Mould Height: 220 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: All-electric servo drive Installed Power: 47 kW Full Load Current: 79 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: Zhafir SIGMATEK HMI touchscreen control Equipment / Features Drive Concept: Fully electric servo system for high precision and energy efficiency Operation: Quiet opera ...

closing pressure:6600 kNweight of the machine ca.:45,5 t

Control Type: Selogica,Closing System: Hydraulic,TECHNICAL DATAClosing Force: 600 kN,Clearance between Tie Bars: 370 mm x 370 mm,Platelet Dimensions: 570 mm x 570 mm,Mold Size: Min 250 mm,Maximum Opening Stroke: 500 mm,Maximum Distance Between Platens: 750 mm,Screw Diameter: 40 mm,Injection Volume / Shot Weight: 188 ccm / 172 grams PS,Injection Pressure: 1390 bar,GENERAL DATAMotor: 11 kW,Heaters: 5.5 kW,EQUIPMENTLanguage: German,Service Booklet: Yes Auction-ID: A7-49265-7

Control Type: Selogica,Closing System: Hydraulic,TECHNICAL DATAClosing Force: 1500 kN,Clearance between Tie Bars: 470 mm x 470 mm,Platelet Dimensions: 650 mm x 650 mm,Mold Size: Min 250 mm,Maximum Opening Stroke: 500 mm,Maximum Distance Between Platens: 750 mm,Screw Diameter: 45 mm,Injection Volume / Shot Weight: 230 ccm / 210 grams PS,Injection Pressure: 1670 bar,GENERAL DATAMotor: 30 kW,Heaters: 10.2 kW,EQUIPMENTLanguage: GermanHydraulic core: x1Air valve: YesService booklet: YesAdditional equipment:Robot input, RobotArburg Multilift, Hot Auction-ID: A7-49265-8

Machine is dismantled and stored (see photos). May show traces of storage with including 2× Arburg Thermolift 100-2: and a Koch conveyor see photos Auction-ID: A7-49688-6

Injection speed 330 mm/s, tie bar spacing 560x510 mm, plate size 800x750 mm, min. mold size 325x300 mm, total heating power 6.5 kW, power source 3-phase AC 200 V at 50/60 Hz, without injection molding tool Auction-ID: A1-49516-2

Control type: Unilog B4Closing system: KnobTECHNICAL DATAClosing force: 50 kNMaximum mold size: 196 mm x 156 mmPlate dimensions: 196 mm x 364 mmMold size: min. 100 mmMaximum opening stroke: 200 mmMaximum plate spacing: 300 mmScrew diameter: 14 mmInjection volume / Shot weight: 1.1 ccm / 1 gram PSInjection pressure: 2500 barGENERAL DATAMotor: 2 kWEQUIPMENTLanguage: GermanHydraulic core: -Air valve: x1Service booklet: YesAdditional equipment: See belowAdditional equipment: Rotary table, Robot integrated with the machine, Fully electric injection molding machine, Quality monitoring module, Cleanroom module, Mold pressure control, Quiet machine operation, Additional 14 mm screw Auction-ID: A7-49265-4

Injection speed 330 mm/s, tie bar spacing 460x410 mm, plate size 660x610 mm, min. mold size 265x240 mm, total heating power 6.5 kW, power source 3-phase AC 200 V at 50/60 Hz, without injection molding tool Auction-ID: A1-49516-1

Control Type: SelogicaClosing System: HydraulicTECHNICAL DATAClosing Force: 800 kNClearance between Tie Bars: 420 mm x 420 mmPlatelet Dimensions: 570 mm x 570 mmMold Size: Min 250 mmMaximum Opening Stroke: 500 mmMaximum Distance Between Platens: 750 mmScrew Diameter: 35 mmShot Volume / Shot Weight: 144 ccm / 121 grams PSInjection Pressure: 1820 barGENERAL DATAMotor: 15 kWHeaters: 5.5 kWOperating Hours: To be verifiedEQUIPMENTLanguage: GermanHydraulic core: x1Service book: YesAdditional equipment: Hot runner, Euromap, Conveyor belt Auction-ID: A7-49265-2

Uniloy Milacron UR-110 16 Head Reciprocating Screw Intermittent-Extrusion Blow Molding Machine (2012)Extrusion systemTechnology: Reciprocating screw, intermittent extrusionMaterials: HDPE, PP (with flexibility for others)Output: High-volume monolayer productionApplications: Dairy, edible oils, juices, household chemicalsTypical bottle range: 100 mL to 2 LNumber of heads: 16Container types: Lightweight monolayer bottles, handleware & non-handleware, foil-seal compatible Auction-ID: A1-48805-89

Arburg Allrounder CENTEX 520 C 2000-675, year of manufacture 04/2003, serial number including 2× Arburg Thermolift 100-2 + Koch granulate conveyor Auction-ID: A7-49688-5

clamping force: 600 kNinjection volume: 106 cm³screw diameter: 30 mmplaten size: 590 x 600 mmCondition: used,Specification: Horizontal injection moulding machine, type: System 60/420-200- Internat. Size specification: 600 - 200injection unit:- Screw diameter: 30 mm- L/D - ratio: 20D- Injection volume: 106 cm³- Injection pressure: 1995 bar- Cylinder heating: 8,3 kWclamping unit:- Clamping force: 600 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 590 x 600 mm- Clear column distance: 420 x 420 mmTotal machine:- Oil tank filling: 180 ltr.- Pump capacity: 22 kW- Voltage: 3x 400V, 50 Hz- total power: 30,3 kW- Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm- Weight without oil approx ...

clamping force: 600 kNinjection volume: 144 cm³screw diameter: 35 mmplaten size: 570 x 570 mmclosing stroke: 500 mmCondition: usedSpecification: Horizontal injection moulding machineclamping unit:- Clamping force max.: 600 kN- clamping platens: 570 x 570 mm- clear column distance: 370 x 370 mm- Distance between the mould mounting platens: 750 mm- Mould installation height: 250 mm- Opening stroke max.: 500 mm- Ejector travel hyd. Ejector stroke: 175 mm- Ejector force max.: 40 kNInjection unit:- Screw diameter: 35 mm- Screw length: 20D- Screw stroke max.: 150 mm- Max. dosing volume: 144 cm³- Moulded part weight: 121 g- Injection pressure: 1,820 bar- Injection flow max.: 154 cm³/s- Screw peripheral speed: 57 m/min-  ...

clamping force: 450 kNinjection volume: 135 cm³screw diameter: 35 mmplaten size: 550 x 430 mmCondition: second-hand,Specification: Horizontal injection moulding machineInjection unit:- Screw diameter: 35 mm- Screw length L/D: 17.3D- Dosing stroke: 140 mm- Screw speed: 20 – 480 rpm- Moulding volume: 135 cm³- Injection pressure: 1,065 bar- Increased injection pressure: 1,620 bar- Heating power: 6.8 kW- Number of heating zones (including nozzle): 4Clamping unit:- Maximum clamping force: 450 kN- Platen dimensions: 550 x 330 mm- Extended clamping plates: 550 x 430 mm- Minimum mould installation height: 180 mm- Maximum plate spacing: 530 mm- Opening stroke: 350 mm- Control system: EC 100Drive:- Pump drive power: 11 kW- Approx. weight: 3,300 kg-  ...

clamping force: 4.000 kNinjection volume: 2480 cm³screw diameter: 90 mmplaten size: 1.300 x 1.080 mmCondition: second-hand,Specification: Horizontal injection moulding machine Injection unit:- Screw diameter: 90 mm- Injection volume: 2,480 cm³- Maximum shot weight: 2,232 g- Injection pressure: 1,360 bar- Increased injection pressure: 1,600 bar- Heating capacity: 64 kWClamping unit:- Max. clamping force: 4,000 kN- Clamping plates: 1,300 x 740 mm- Extended clamping plates: 1,300 x 1,080 mm- Minimum mould installation height: 350 mm- Maximum platen spacing: 1,300 mm- Opening stroke: 950 mm- Core pull unit: 2-stage on BAP- Control system: EC 100Drive:- Pump drive power: 55 kW- Weight (clamping side) appr ...

Used SACMI OIMA 350T injection molding machine - Year 2010Technical Specifications & Performance DataThis injection molding machine for PET preforms is a high-output cell engineered for beverage production and industrial packaging applications. Manufactured by OiMA, it combines robust clamping performance with precise injection control and a complete set of auxiliaries for reliable second hand operation within a used bottling line context.Manufacturer: OiMA S.p.A.Model: 6500.350Application: PET preform production for beverage packagingClamping force: 350 tonInjection volume: 4500 cm³ per 100 MPaInstalled power: 436.58 kWPower supply: 400 V, 50 HzMachine mass: 20,000 kgPress year: 2014Mold: SACMI PPM 072 H, 72 cavities, 34 g preforms, neck type Alaska Blue PRE 342Year: 2010Mold temperature: 8–12 °CMold mass: 9,720 kgAuxiliaries included: Sytrama REV 156 PET take-out robot; Plastic Sys ...

Used NEGRI BOSSI 850T injection molding machine - Year 2004Technical Specifications & Performance DataThis NEGRIBOSSI U850 Injection Molding Machine delivers high-tonnage performance for large-shot applications and precision molding. Configured with a 100 mm screw, it offers robust shot volume and clamping power, making it suitable for industrial packaging components and beverage production accessories. Manufactured in 2004, the machine integrates proven NEGRIBOSSI engineering with an EUROMAP 8500H-6500 injection unit and a user-friendly HMI.Model: U850 (EUROMAP 8500H-6500)Clamping force: 8500 kNScrew diameter: 100 mmShot volume: 3925 cm3Shot weight (PS): 3570 gMaximum shot weight: 3750 gInjection pressure: 1670 barBetween tie-bars (H x L): 1140 x 1020 mmPlaten size (H x L): 1670 x 1580 mmMould height (min–max): 400–1100 mmOpening stroke: 1200 mmEjector stroke: 399 mmHydraulic operat ...

clamping force: 1500 kNinjection volume: 141 g/PSscrew diameter: 35 mmplaten size: 470 x 470 mmCondition: used,Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITIONInjection unit:- Screw diameter: 35 mm (wear-resistant)- Centring ring diameter: 125 mm- Max. shot weight: 141 g (PS)- Injection pressure: 2,500 barClosing unit:- Clamping force: 1,500 kN- Max. opening stroke: 750 mm- Mould installation height: min. 250 mm- Mould clamping plates: 470 x 470 mm- Approx. operating hours: 79,000 h (still in use)- Operating voltage: 3x 400 V, 50 Hz- Nominal motor heating current: 75 / 40 A- Total current: 115 A- Total connection: 65 kW- Core pulls: 1x- Hot runner control points: 6x- Temperature control unit interfaces: ...

Key data: 14000 kN

Máquina + Robô

Key data: 27000 kN, 190 mm

Incl. Robô Viper 90

Key data: 24000 kN, 150 mm

máquina+robô

This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.

Key data: 17000 kN, 120 mm

Parâmetros-chave: - Força de fixação: 17.000 kN (1.700 toneladas) - Unidade de injeção: 12060 - Diâmetro do parafuso: 120 mm - Volume de disparo: até 7.729 cm³ - Pressão de injeção: até 2.300 bar - Capacidade de injeção: até 1.875 cm³/s - Curso de abertura: 2.550 mm - Espaçamento máximo dos painéis: 3.350 mm - Tamanho do painel: 2.420 × 2.170 mm - Potência motriz: 176 kW - Controlo: ENGEL CC300 - Língua de controlo: Inglês Equipamento da máquina: - Hidráulica servo ENGEL ecodrive para operação de poupança de energia - controlo de peso iQ - Controlo de abraçadeira iQ - controlo de fusão iQ - Monitorização do processo Autoprotect - Controlo de aquecimento por molde de 92 zonas - Puxões hidráulicos e pneumáticos do núcleo - Aquecedores cerâmicos - Isolamento de cilindros - Sistema Ecograph / Ecobalance - Preparação MES – EU ...

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Key data: 6500 kN, 105 mm

Localização é : América Latina

Key data: 20000 kN

Angebot/Oferta: Engel Duo 17060/2000 Robô Viper 60 aprox. 4900h Ano 2021