máquinas injetoras usadas para venda (1,092)

HUSKY GL300 System 48mm +3025 +Óleo Comestível 32mm + 2921 moldes OPPORTUNITY HUSKY GL300 ANO 1998 MOLDES + 48mm de pescoço de água acabamento 32 cavidade completa molde (hot runner) com 2 conjuntos de núcleo (81gr~85gr~91gr.) + 30/25 acabamento de pescoço de água 48 cavidade completa molde (hot runner) com 1 conjunto de núcleo (16~18,2 gr) + Óleo comestível de 32 mm (encaixe no óleo comestível largo) do pescoço com meio molde com conjunto de núcleo (24~27gr.) + 29/21 óleo comestível 25 gr acabamento de pescoço alteração de reforma sobre kit. Auxiliares: Desumidificador de bolor de piovan, secador de resina com tremonha, e transportador T 400v 50hz Condição: Condição justa, ligada (pode ser inspecionada) Mais imagens a pedido USA Mobile: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense

This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine.

Connected load 11.5 kW, extruder screw diameter 32 mm, 3 heating zones, heating time approx. 20 min, potting temperature 0-280 °C, incl. TORO-Systems TR Dry-Jet granulate supply Auction-ID: A7-45263-20

Clamping force: 1800 KN Max injection cc 500g 380V/50Hz Auction-ID: A7-45261-4

closing pressure:6600 kNweight of the machine ca.:45,5 t

Clamping unit Clamping force max.1500 kN Feed force max. 50kN Opening travel max. 500 mm Tool installation height min/ max. 250/ 500 mm clear column spacing 470x470 mm Tool mounting platens 650x650 mm Injection unit Screw diameter: 45 mm Snail path max. 145 mm Displacement Shot weight Spray pressure Operating hours Automatic operation 86305 hrs Pump 88526 hrs Machine cycles 18057893  Miscellaneous Total installed power 41.9 kW Auction-ID: A7-40841-4

Clamping force: 200 Ton; piston closure; column passage: 520x520 mm; screw: 55mm; selogic control; Nr. 1 hydraulic jacks; Nr. 1 bellows; Euromap 12. Serial: 178453Estimated weight: 6700 kg Approximate dimensions: 5500x2000xh2200 mm Auction-ID: A7-44996-25

Clamping force: 430 Ton; toggle closure; column passage: 760x680 mm; screw: 60mm; control B&R Columbia; Nr. 2 pneumatic jacks and 2 hydraulic jacks; Nr. 1 air blow; Euromap 12. Serial: 364-112Estimated weight: 19500 kg Approximate dimensions: 8200x1950xh2600 mm Auction-ID: A7-44996-26

Injection Unit Engine not working Screw Diameter: 65 Ø Injection Volume: approx. 1,025 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 450 cm³/s Plasticizing Capacity: approx. 80 g/s (PS) Nozzle Contact Force: 100 kN Clamping Unit Clamping Force: 5,000 kN (500 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,300 × 1,200 mm Mould Opening Stroke: 800 mm Max. Daylight Opening: approx. 1,400 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 90 / 60 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 37 kW Total Installed Power: approx. 55 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for high rigidity and space efficiency Energy Effi ...

Machine type: Injection moulding machine Manufacturer: ENGEL Model: Duo 3550/400 Pico Year of manufacture: 2013 Serial number: 191000 Clamping force: 400 t Clamping system: Two-platen Hydraulic system pressure: up to 160 bar Drive system: Servo-hydraulic ecodrive inside” Pump motor power: 30 kW Total installed power: approx. 45 kW Power supply: 400 V / 50 Hz / 3-phase Control system: ENGEL CC300 control unit Control features: Colour touchscreen, integrated process monitoring Equipment / Features: - Automatic central lubrication system - Safety interlocks on operator and service sides - Energy-efficient servo-hydraulic drive - Designed for large technical and automotive moulding applications Overall dimensions (L x W x H): approx. 6800 x 1900 x 2400 mm Own mass: approx. 11,000 kg Auction-ID: A7-44836-1

Injection Unit Screw Diameter: Ø 70 Injection Volume: approx. 1,540 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 6,500 kN (650 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,600 × 1,500 mm Mould Opening Stroke: 900 mm Max. Daylight Opening: approx. 1,600 mm Min. Mould Height: 450 mm Ejector Stroke: 250 mm Ejector Force (fwd / back): 110 / 70 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for compact footprint and high stability Energy Efficiency: Servo-hy ...

Injection Unit Screw Diameter: Ø 55 Injection Volume: approx. 517 cm³ Injection Pressure: up to 2,000 bar Injection Rate: approx. 220 cm³/s Plasticizing Capacity: approx. 35 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 60 kN Clamping Unit Clamping Force: 2,300 kN (230 t) Clamping System: Zhafir Zeres all-electric toggle system Platen Size (H × V): approx. 850 × 800 mm Mould Opening Stroke: 470 mm Max. Daylight Opening: approx. 940 mm Min. Mould Height: 220 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: All-electric servo drive Installed Power: 47 kW Full Load Current: 79 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: Zhafir SIGMATEK HMI touchscreen control Equipment / Features Drive Concept: Fully electric servo system for high precision and energy efficiency Operation: Quiet opera ...

Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 490 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 350 cm³/s Plasticizing Capacity: approx. 50 g/s (PS) Nozzle Contact Force: 65 kN Clamping Unit Clamping Force: 2,600 kN (260 t) Clamping System: ENGEL Victory tie-bar-less design Platen Size (H × V): approx. 1,000 × 950 mm Mould Opening Stroke: 600 mm Max. Daylight Opening: approx. 950 mm Min. Mould Height: 350 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: Hydraulic Hydraulic System Pressure: up to 160 bar Pump Motor Power: 22 kW Total Installed Power: approx. 30 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping Concept: Tie-bar-less design for improved mould accessibility and compact footprint Hydraulics: Energy-saving hydraulic  ...

Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 392 cm³ Injection Pressure: up to 2,100 bar Injection Rate: approx. 200 cm³/s Plasticizing Capacity: approx. 30 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 50 kN Clamping Unit Clamping Force: 1,900 kN (190 t) Clamping System: Zhafir Zeres all-electric with servo-hydraulic auxiliaries Platen Size (H × V): approx. 770 × 720 mm Mould Opening Stroke: 450 mm Max. Daylight Opening: approx. 900 mm Min. Mould Height: 200 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 40 / 30 kN Drive & Control Drive Type: Hybrid electric / servo-hydraulic (Zeres series) Connected Load: 45 kW Full Load Current: 76 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: SIGMATEK CNC-based control with Zhafir HMI touchscreen Equipment / Features Drive Concept: Hybrid Zeres system combining electri ...

Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for high rigidity and precision Platen Area: Large platen  ...

Serial number: X41520 Machine type: Injection Moulding Machine Clamp unit: 400T (Tonnage Group G0 400T–450T) Injection unit: 2500 Injection Specifications: - Screw Ø: 84 mm - Screw type: GP for GF - Intensification ratio: 9.7 - Max. shot weight (PS): 2018 g - Injection capacity (cm³): 2106 - Injection rate: 415.4 cm³/s - Max. screw stroke: 380.2 mm - Max. hydraulic injection pressure: 165 bar - Specific injection pressure: 1601 bar Clamping Unit: - Tie bar spacing: 865 mm × 865 mm (H × V) - Mould height: 500 – 1050 mm - Max. platen distance: 1770 mm - Location ring Ø: 160 mm - Location screw (MX): M20 - Core pulling: 2 sets Power Requirements: - Voltage: 380–400 V - Drive power: 166.4 kW - Heating wattage: 44 kW - Total power: 210.4 kW - Current requirement: 380 A Robot: ATM ES2000 Max. water heater temperature: 95 °C Machine dimensions: 9600 × 2400 mm Machine weight: [ ...

Auction-ID: A1-44702-172

Valve gate control unit with hydraulic and pneumatic actuation Auction-ID: A1-44702-170

Serial number: X42252 Machine type: Injection Moulding Machine Clamp unit: 400T (Tonnage Group G0 400T–450T) Injection unit: 5600 Injection Specifications: - Screw Ø: 97 mm - Screw type: GP mixing for G - Intensification ratio: 9.42 - Max. shot weight (PS): 253 g - Injection capacity (cm³): 3394 - Injection rate: 550.4 cm³/s - Max. screw stroke: 450.2 mm - Max. hydraulic injection pressure: 170 bar - Specific injection pressure: 1600 bar Clamping Unit: - Tie bar spacing: 750 mm × 750 mm (H × V) - Mould height: 300 – 885 mm - Max. platen distance: 1605 mm - Location ring Ø: 175 mm - Location screw (MX): M20 - Core pulling: 2 sets Power Requirements: - Voltage: 400 V - Drive power: 124.3 kW - Heating wattage: 44 kW - Total power: 168.3 kW - Current requirement: [Not specified] Robot: ATM ES2000 Max. water heater temperature: 95 °C Machine dimensions: 9600 × 2200 mm Machine  ...

Serial Number: 61008334 • Power: Unknown • Condition: Used • Additional Notes: Multinject configuration visible; machine equipped with additional vertical injection unit and safety enclosure; CE marked. Weight according to manufacturer plate. • Clamping force approx. 175 tons; screw diameter 160 mm class; designed for thermoplastic injection molding. Auction-ID: A7-40551-16

Lot of TST coupling units of various sizes Auction-ID: A1-44702-171

Serial Number: 154812 • Power: 400 V, 3 Phase, 50 Hz • Condition: Used • Additional Notes: Electrical data per nameplate: total current 107 A; main fuse 125 A; motor current 60 A; CE marked. Equipped with peripheral handling equipment visible (conveyors, temperature control unit, material hoses) Auction-ID: A7-40551-17

Auction-ID: A1-44702-173

Clamping force: 100 T Screw diameter: 40 mm Tiebar spacing X: 400 mm Tie bar spacing Y: 400 mm Capacity: 231 cm³ Shot weight: 205 g 210 Bar Q-Max: 100 l/min Panel length: 580 mm Top width: 590 mm Tool opening travel: 500 mm Auction-ID: A7-44493-169

clamping force: 1500 kNinjection volume: 141 g/PSscrew diameter: 35 mmplaten size: 470 x 470 mmCondition: used,Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITIONInjection unit:- Screw diameter: 35 mm (wear-resistant)- Centring ring diameter: 125 mm- Max. shot weight: 141 g (PS)- Injection pressure: 2,500 barClosing unit:- Clamping force: 1,500 kN- Max. opening stroke: 750 mm- Mould installation height: min. 250 mm- Mould clamping plates: 470 x 470 mm- Approx. operating hours: 79,000 h (still in use)- Operating voltage: 3x 400 V, 50 Hz- Nominal motor heating current: 75 / 40 A- Total current: 115 A- Total connection: 65 kW- Core pulls: 1x- Hot runner control points: 6x- Temperature control unit interfaces: ...

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.

This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine.