mandriladoras e centros de usinagem usadas para venda (3,266)

x-travel: 2000 mmy-travel: 1600 mmz-travel: 800 mmcontrol: Siemens 840 D boring spindle diameter: 150 mmbore spindle turning speed range: 4-1500 U/minFeeds, stepless (Y, Z): 1-9999 mm/minRapid Feed Y, Z, W: 10000 mm/minBoring spindle taper: ISO 50 Milling spindle taper: ISO 60 surface area: 1600 x 2000 mmworkpiece weight max.: 12500 kgtotal connected load: 90 kWweight of the machine ca.: 32200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 15441 €: 296.47 €: 40 mm: MK 4 : 300 mm: 1,5 / 3,0 kW: M30 : 610 mm: 850 mm: 1920 mm: 440 kg: 0 - 300 mm/U: 160 mm: 125 mm: 150 - 700 mm: 590 x 450 mmDisplay with the following functions:- Selection of operating mode: manual drilling / drilling with feed / tapping- Spindle speed- Feed rate- Zero point setting- Drilling depth- Piece counter- Chip breaking mode- Jump switch mode (for efficient drilling of square tubes)- Spindle stop (automatically stops the spindle after the drilling cycle)- Free cutting time modeDrilling capacity / normal drilling performance 35/40 (in E335/ST60)Automatic feedDrilling depth adjustment with fine adjustment and undervoltage triggerEMERGENCY STOP pushbuttonStepless speed controlConnection cable (1.5 m) with CEE plugDrill protection with electr. FuseThermal overload protection3 years warranty for single sh ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 3649.63 €: 15 mm: B 16 : 214 mm: 40 - 4000 U/min: 0,54 kW: M10 : 355 mm: 485 mm: 1027 mm: 70 kg: 125 - 490 mm: 300 x 250 mm: 82 mmTHE HEIGHT-ADJUSTABLE HEAD MAKES IT IDEAL FOR SHORTER USERS, E.G., FOR TRAINING WORKSHOPS AND SCHOOLSPLUS - CONTROL PANEL- Drilling mode / Tapping mode- Zero point setting- Drilling depth adjustment- Infinitely variable speed adjustment- Piece counter- Spindle stop function (spindle stops automatically after drilling)Drilling capacity / normal drilling Performance 13 / 15 (in E335/ST60)Manal feedTapping deviceControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontHead height adjustment via toothed rackLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindl ...

x-travel: 400 mmy-travel: 400 mmz-travel: 375 mmcontrol: Siemens 840D sl Linear total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 500 mmz-travel: 550 mmControl: Mazatrol Smooth G spindle turning speed - stepless: 15000 U/minspindle motor: 11 kWdistance table - lower edge spindle: 150 - 700 mmrapid traverse: 42 m/mintable surface area: 1050 x 500 mmworkpiece weight max.: 750 kgtool taper: CAT 40 total power requirement: kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: mdimensions of the machine ca.: 3,34 x 2,33 x 2,9 m- CNC control Mazatrol Smooth G- 30-fold tool changer (CAT 40)- NIKKEN 4th Axis -ROBOJOB MA-PAL Robot with Controller & Accessories - Loading & Unloading Pallets - Swarf Conveyor & Swarf Bin. EXOMIST Mist Extractor - Renishaw Tool Setter - Renishaw Probe - Renishaw Receiving Unit - Peripheral Safety Guarding - Selection of Spindle Tooling - Set of Manuals.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 580 mmz-travel: 580 mmcontrol: SEICOS 16M B-axis (table): 360 x 1° mmfeed X/Y/Z/-axis: 1 - 50.000 mm/minrapid traverse X/Y/Z: 50,00 m/minturning speed range - stepless: 35 - 12.000 Nmspindle drive: 22,00 kWmax. torque on the spindle: 236 tool taper: BT40 toolpiece magazine: chain magazine: 61 Stücksize of pallet: 2x 400x400 mmmax. workpiece diameter: 630 mmworkpiece height max.: 680 mmworkpiece weight max.: 400 kgtotal power requirement: 30,00 kWweight of the machine ca.: 12,00 tdimensions of the machine ca.: 4,00 x 3,50 x H3,00 mWith SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 25 -1500 U/min Stufenlosbore capacity in steel (diameter): 23 mmbore stroke: 120 mmtable clamping surface:: 1250 x 340 mmtaper MK: MK3 total power requirement: 2 kWweight of the machine ca.: 0,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 6840 €: 132.01 €: 25 mm: MK 3 : 250 mm: 245 - 4000 U/min: 0,7 / 1,3 kW kW: M18 : 400 mm: 655 mm: 1900 mm: 280 kg: 120 mm: 100 mm: 85 - 635 mm: 1.195 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEV-belt drivemanual feedleft-right drillingtool ejectoradjustable depth stoptable with T-slotsdrill guard with micro switchlightening equipmentuser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):Variable speed incl. digital display (VE+TAK)Tapping device (IR/RS)Coolant equipment incl. T-slots in the ground plate (ERB)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 8970 €: 173.12 €: 30 mm: MK 3 : 250 mm: 65 - 3.060 (8) U/min: 380 mm: 600 mm: 2060 mm: 260 kg: 100 mm: 170 - 660 mm: 1.216 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEHigh quality geardrive machine2 automatical feedLeft-right drillingAutomatic tool ejectorAdjustable depth stopTable with T-slotsDrill guard with micro switchLightening equipmentUser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 10930 €: 209.86 €: 35 mm: MK 4 : 300 mm: 132-194-277-319-466-666-8 U/min: 1.5 kW: M27 : 755 mm: 480 mm: 2205 mm: 385 kg: 125 mm: 90 - 890 mm: 1250 mm: 400 x 420 mm: 150 mmManual feedGeared driveHardened and ground high quality steel gearsSpeed plate and selecting levers on head frontDepth scale and adjustable depth stopThermomagnetic switchEmergency STOP push buttonSpindle reversing switchWorklightFixed tableSafety drill guard with microswitchCE markOPTIONS (PRICES ON REQUEST): Electronic speed variator with speed digial reader (VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader(LBC) Manual tapping system (IR/RS) Manual tapping system for models with variator(IR/RS-VE) Rotating and tilting table(MGI) Coolant equipment with T-slots in the base plate (ERB)ERLO BX- ...

: neu : 2025 : 030140 : prompt, Zwischenverkauf v : Deutschland : 13429.36 €: 257.84 €: 1 : 30 mm: MK 3 : 280 mm: Stufe 1: 125 - 4000, Stuf U/min: 0,9 / 1,45 kW kW: M20 : 820 mm: 520 mm: 1900 mm: 320 kg: 0 - 300 mm/U: 240 - 790 mm: 420 x 340 mm: 125 mmDrilling capacity / normal drilling performance25/30 (in E335/ST60)Automatic feedDigital speed-, drilling depth and feed displayDrilling depth adjustment with fine adjustment and undervoltage triggerEMERGENCY STOP pushbuttonStepless speed controlTable height adjustment via toothed rackConnection cable (1.5 m) with CEE plugDrill protection with electr. FuseThermal overload protectionElectronically infinitely variable feed incl. Spindle monitoringFree cutting deviceThread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth displayDrilling depth shut-off, programmable, easy operationDrilling ...

: neu : 2025 : .00772 : prompt, Zwischenverkauf v : 341.12 €: 1 : 80 mm: 28 mm: 12 kgVice [felix] 2.0 80Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm)Taper mandrel B16/MK IIReducing sleeve MK II/MK IThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 00774 : prompt, Zwischenverkauf v : Deutschland : 523.41 €: 1 : 100 mm: 32 mm: 12 kgVice [felix] 2.0 100Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm)Taper mandrel B18/MK IIReducing sleeve MK II/MK IThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : .00775 : prompt, Zwischenverkauf v : 949.81 €: 1 : 150 mm: 40 mm: 33 kgVice [felix] 2.0 150Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm)Taper mandrel B18/MK IVReducing sleeve MK III/MK IIReducing sleeve MK III/MK IThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : 428.36 €: 100 mm: 32 mm: 135 mm: 13 kg[felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper.The machine vice for freely adjustable clamping of the workpiece.Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted.Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpiecesHardened and precision ground clamping jawsNo additional clamping devices necessaryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1445 €: 19 mm Weldon : 1 kW: 307 mm: 221 mm: 317 mm: 135 kg: 36 mm: 51 mm: 70 mm: 350 U/min: 6 mmNew PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and givesadditional safety and diagnostic information.Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode.The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speedand the range of allowable cutting parameters for a given tool type and hole diameter.It results in extending tool life of both HSS and TCT cutters and enhanced machine performance.Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green)are possible in manual mode only.A safety strap protects ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1055 €: 12 mm: 19 mm Weldon : 1.1 kW: 400 mm: 126 mm: 185 mm: 10 kg: 12 mm: 40 mm: 40 mm: 45 mm: 370 U/min: 6 mmPRO-40 AD is a low profile mag drill, that fits in the tightest of spots.Perfect solution for any applications in confined spaces, wheretypical mag drills are too large.Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep.An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces.Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces,preventing the motor from engaging if the adhesive force is dangerously low.PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) Weldon shank.Featu ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 2625.31 €: 10 mm: B 16 : 220 mm: 60 - 6000 U/min: 0,54 kW: 350 mm: 520 mm: 820 mm: 44 kg: 60 mm: 140 - 315 mm: 300 x 250 mm: 70 mmDrilling capacity / normal drilling Performance 10/12 (in E335/ST60)Thread cutting deviceControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomicDrilling depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with Schuko plug3 years warranty for single shift OperationOPTIONS (PRICES ON REQUEST):Machine cabinet with door and drawerDrill package 2 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 3649.63 €: 15 mm: MK 2 : 220 mm: 40 - 4000 U/min: 0,75 kW: M12 : 400 mm: 520 mm: 850 mm: 65 kg: 70 mm: 85 - 370 mm: 300 x 250 mm: 70 mmDrilling capacity / normal drilling Performance 15/18 (in E335/ST60) 17 NmThread cutting systemControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomicDrilling depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with Schuko plug3 years warranty for single shift operationOPTIONS (PRICES ON REQUEST):Machine cabinet with door and drawerDrill package (vice &, keyless chuck)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 6939.26 €: 133.93 €: 20 mm: MK 2 : 260 mm: 30 - 3000 U/min: 1,5 kW: M12 : 430 mm: 715 mm: 1800 mm: 290 kg: 100 mm: 110 mm: 230 - 850 mm: 420 x 340 mmDrilling capacity / normal drilling Performance 20/23 (in E335/ST60)Main switchTapping attachementControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with CEE plug3 years warranty for single shift operationArt. - No. 223.020 R1 (20-2,000 1/min)Art. - No. 223.025 R2 (30-3,000 1/min)OPTIONS (PRICES ON REQUEST):Drill package 3 (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 7035.46 €: 135.78 €: 25 mm: MK 3 : 280 mm: 125 - 4000 (2 Stufen) U/min: 0,9 / 1,45 kW: M20 : 520 mm: 820 mm: 1900 mm: 275 kg: 125 mm: 110 mm: 240 - 790 mm: 420 x 340 mmDrilling capacity / normal drilling performance 25/30 (in E335/ST60)Drilling depth adjustment with fine adjustmentEmergency stop pushbuttonUndervoltage releaseelectr. Drilling machine guardManual reversing switch for clockwise and anticlockwise rotationConnection cable (1.5 m) with CEE plugThermal overload protectionOPTIONS (PRICES ON REQUEST):Drill package (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 8144.6 €: 157.19 €: 25 mm: MK 3 : 280 mm: 125 - 4000 (2 Stufen) U/min: 0,9 / 1,45 kW: M20 : 520 mm: 820 mm: 1900 mm: 275 kg: 125 mm: 110 mm: 240 - 790 mm: 420 x 340 mm: 125 mmDrilling capacity / normal drilling performance 25/30 (in E335/ST60)Drilling depth adjustment with fine adjustmentDigital drilling depth and speed displayEmergency stop pushbuttonUndervoltage releaseelectr. Drilling machine guardManual reversing switch for clockwise and anticlockwise rotationConnection cable (1.5 m) with CEE plugThermal overload protectionOPTIONS:Drill package (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 7160 €: 138.19 €: 30 mm: MK 3 : 250 mm: 245 - 4000 U/min: M25 : 400 mm: 655 mm: 1185 mm: 280 kg: 120 mm: 100 mm: 85 - 635 mm: 1.195 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEV-belt drivemanual feedleft-right drillingautomatic tool ejectoradjustable depth stoptable with T-slotsdrill guard with micro switchlightening equipmentuser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):Variable speed incl. digital display (VE+TAK)Tapping device (IR/RS)Coolant equipment incl. T-slots in the ground plate (ERB)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Spanien : 50410 €: 952.75 €: 35 mm: MK 4 : 390 mm: 94- 2.225 (16) 50 Hz 113 U/min: M35 : 1660 mm: 1510 mm: 2600 mm: 910 kg: 180 mm: 190 - 650 mm: 1310 mm: 125 mm: 400 x 420 mm: 0,10 - 0,18 - 0,24 (3) mm/min: 750 - 1.500 U/minERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEdrilling and milling machineautomatic feedprecision electromagnetic clutchesgeared drivecross tablefixed base and displaceable headstockcontrol panelcooling equipment with electric motor pumphand wheel for fine tuningclamping device for toolsadjustable stopdrill guardOPTIONAL EQUIPMENT (PRICES ON REQUEST):Digital read out for drilling depthTapping deviceMotorized longitudinal and/or transverse feedDigital read out for table axes and/or drill head height adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : 880.52 €: 150 mm: 40 mm: 200 mm: 33 kg[felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper.The machine vice for freely adjustable clamping of the workpiece.Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted.Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpiecesHardened and precision ground clamping jawsNo additional clamping devices necessaryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1781.01 €: 10 mm: B 16 : 180 mm: 250 - 3000 U/min: 0,45 kW: 400 mm: 248 mm: 460 mm: 30 kg: 50 mm: 105 - 245 mm: 300 x 200 mm: 50 mmContinuous/normal drilling performance 10/12 (in E335/ST60)Manual feedDigital speed displayRobust, high quality and inclined rotation hood for easy speed readingLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionUndervoltage releaseDrill protection with electr. FuseConnection cable with Schuko plug (1.2 m)3 years warranty for single shift operationOPTIONS:Machine cabinet with door and drawerDrill package 2 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 595 €: 12 mm: 19 mm Weldon : 0.1 kW: 175 mm: 250 mm: 312 mm: 10 kg: 12 mm: 36 mm: 51 mm: 70 mm: 350 U/minThe PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameterby means of twist drill bits with Weldon shank 19mm (3/4’’).Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers.Features &, benefits:• Dual bars guide system ensures extraordinary stiffnessand adjustment free operation• Compact size and ultra-lightweight - ideal for site work• Rugged one piece slide and gear box for extra stability• Purpose designed motor with heavy duty gear box• Maintenance-friendly design makes it easy to use• Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials• Magnetic Power Adhesion Con ...

: 16 mm: M 12 : MK 2 : 100-2.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 93 kgStandard equipment:5 TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function.setpoint, actual speed display, integrated drilling depth display with touchzero point transfer, virtual drilling depth scale in the display, machine statusstatus indicators and warnings on the display, Service information, Selectable operator languageoperator language: DE/EN/FR/ES/IT/NL/RU.- AC motor 230 Volt, 50 Hz- Connection plug ready fitted, cable length 3 m- Infinitely variable speed adjustment via potentiometer- Three separate buttons for  ...