mandriladoras e centros de usinagem usadas para venda (3,229)

comprimento da mesa: 3000 mmlargura da mesa: 3000 mmcarga da mesa: 25 tnecessidade de potência total: kWpeso da máquina ca.: tespaço necessário: m

spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-travel: 1250 mmw-axis: 800 mmb-axis: 360 °spindle turning speed range: 1000 U/mintransmission ratio: 4 Control: Heidenhain type: 355 table surface area: 1800x2200 mmTable load: 12000 kgspindle taper ISO: 50 width of T-slots: 22 mmT-slot - distance: 160 mmFeed: 1-6000 mm/mintable rotating: 1,5 U.min-1total power requirement: 80 KVAweight of the machine ca.: 36 tdimensions of the machine ca.: 7,7x7,2x4,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2400 mmy-travel: 1000 mmz-travel: 1250 mmControl: Siemens type: 840 C size of pallet: 1250x800 mmnumbers of pallets: 4 : 360 °turning speeds: 4-5800 U/minTable load: 3000 kgspindle taper ISO: 50 Tool changer: 161 Pos.chip conveyor: spindle diameter: 130 mmmilling drive: 45 kWtotal power requirement: kWweight of the machine ca.: 39 tdimensions of the machine ca.: 8x7x4,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mmy-travel: 1200 mmz-travel: 1000 mmControl: Siemens type: 880 M size of pallet: 800x1000 mmnumbers of pallets: 2 : 360 °turning speeds: 5300 U/minTable load: 3000 kgspindle taper ISO: 50 Tool changer: Pos.w-axis: 600 mmchip conveyor: spindle diameter: 125 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 8x7x4,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: mmx-travel: mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mmx-travel: 4200 mmy-travel: 3000 mmdimension of the ram: 380x380 mmram: horizontal adjustment: 500 mmspindle travel: 1200 mmRadial face slide diameter: 780 mmradial face slide travel: 250 mmrotary table:: Defum type: S-1600 Table dimensions: 1500x1500 mmtable travel: 1100 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSerial no .: 6749,optional:floor plaatesClamping angle dimensions (WxHxD): approx. 1800x1500x1000 cm, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mmy-travel: 650 mmz-travel: 650 mmtotal power requirement: kWweight of the machine ca.: 12 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 155 mmworkpiece length: 900 mmstroke: 90 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 10000 mmy-travel: 3500 mmz-travel: 1000 mmControl: Heidenhain type: TNC 155 workpiece weight: 300 tturning speeds: 1620 U/minspindle taper ISO: 50 One direction thrust bearing: 2 Angle head: 2 power capacity: 76 kWPlate area: 12000x9600 mmThickness: 450 mmrotary table:: Colgar type: TRT1500 mmtable surface area: 2000x2500 mmTable load: 20000 kgTravel: 2000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mPlate area: 109 m²The floor plate and the table are optional and will be charged extraThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 7700 mmy-travel: 1500 mmControl: Siemens type: Sinumerik 840 C spindle taper ISO: 130 turning speeds: 1490 U/minpower capacity: 45 kWchip conveyor: Angle head: Angle head: Plate area: 9000x6000 mmworkpiece weight: 100 tOne direction thrust bearing: total power requirement: kWdimensions of the machine ca.: mPanel is optional and we charged extraThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 630 mmz-travel: 710 mmControl: Siemens type: 840Dsl Number of spindles: 2 St.turning speeds: 30-12000 U/mintool taper: HSK 63 Tool changer: 80 Pos.Feed: 1-40.000 mm/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDoppelwendespannerMaschinennummer 0552.80.00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 2750 mmy-travel: 2500 mmz-travel: 1050 mmw-axis: 1000 mmRadial face slide diameter: 800 mmradial face slide travel: 240 mmtable surface area: 1800x2000 mmturning speeds: 4,8-900 U/minworkpiece weight: 8000 kgfaceplate speeds from - to: 4,5-180 U/minFeed: 5-2000 mm/minthreading: total power requirement: 40 kWweight of the machine ca.: 37 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mmx-travel: 1500 mmy-travel: 1250 mmz-travel: 1800 mmturning speeds: 7,1-1120 U/mintable surface area: 1200x1200 mmw-axis: 800 mmRadial face slide: 600 mmradial face slide travel: 200 mmTailstock: mmangular milling head: digital readout: Heidenhain total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 13 mmthroat: 235 mmbore stroke: 60 mmspindle taper: B 16 spindle turning speed - stepless: 100-3000 U/mintable surface area: 290x270 mmcolumn diameter: Ø 60 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mmx-travel: 6400 mmy-travel: 3900 mmz-travel: 1450 mmturning speeds: 500 U/minpower capacity: 52 kWchip conveyor: digital readout: Plate area: 12000x6000 mmPlate area: 7000x3500 mmPlate area: 93 m²total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mflorplates are optional and we charged extraThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mmx-travel: 4440 mmy-travel: 1500 mmz-axis: 400 mmturning speeds: 7-1000 U/minTool bore: SK 50 spindle stroke: 800 mmdigital readout: total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: moptional with floor plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 700 mmz-travel: 700 mmControl: Siemens type: 840Dsl Number of spindles: 2 St.total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDoppelwendespannerMaschinennummer 0552.80.00About usmore than 400 machines in the warehouse over 12000 m² storage area,crane capacity 70 tmore than 1000 items accessories for your workshopYou wantto sell machines production lines or your company, then talk to us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 102 mmx-travel: 1600 mmy-travel: 1000 mmz-travel: 1600 mmControl: Heidenhain type: TNC 410 table surface area: 1000x1120 mmTable load: 3000 kgspindle stroke: 710 mmspindle turning speed range: 4-1600 U/minmain drive motor: 13 kWtotal power requirement: kWweight of the machine ca.: 12 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3800 mmy-travel: 2000 mmz-travel: 670 mmControl: Siemens type: 840 D slsurface area: 3000x1800 mmmilling spindle: 120 KWturning speeds: 30.000 U/mintool holder: HSK 63 Tool changer: 124 Posc-axis: angular milling head: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 600 mmz-travel: 600 mmtable surface area: 630 mm: 360 Gradangle of table min./max.: 45/20 Gradturning speeds: 6300 U/mincontrol: Pfilips type: CNC 432 Tool changer: spindle taper ISO: 40 chip conveyor: total power requirement: 27 KVAweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4,1x2,3x2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 650 mm, 500 mm

Centro de Maquinação Vertical CNC MIKRON VCP 800 W Com controle de pista Heidenhain iTNC 530 Ano de Marca: 2002 Viagens: X 800 Y 650 Z 500 Faixa de velocidade: 0 – 20.000 rpm infinitamente variável Com os seguintes acessórios: Mesa angular rígida 900 mm x 600 mm superfície de fixação Trocador de ferramentas vertical com 30 posições de carregador (HSK 63) Cabine de proteção total com portas de correr e iluminação interior Volante eletrónico Medição de ferramentas na área de trabalho (BLUM Laser) Sonda 3D Infravermelho Renishaw Transportador Configuração do líquido de arrefecimento Sapatos de máquina ajustáveis de 4 alturas Instruções de utilização

Key data: 2 mm, 810 mm, 700 mm

Geral Fabricante: Spinner Tipo: MVC1600-B Ano de Marca: 2006 Horas de ligação: 30.240 h Controle: Siemens 810D ShopMill Cursos: X 1.600 mm Y 810 mm Z 700 mm Eixo Velocidade: 6.000 rpm Potência: 25 kW Suporte para ferramentas: SK50 Trocador de ferramentas Número de estações: 24 vezes com braço duplo Condição Estado: Usado Funcional: Testado e totalmente funcional Outros equipamentos e acessórios incluídos: Transportador Dispositivo de sopro para eixo Sistema de alta pressão IKZ 26 bar Preparação 4º eixo Preparação de sondas de peças

x-travel: 850 mmy-travel: 550 mmz-travel: 630 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Fanuc O-M24-fold tool changerelectronical hand wheelchip tankTechnische Daten / technical details:X-Weg / X-travel 850 mmY-Weg / Y-travel 550 mmZ-Weg / Z-travel 630 mmSpindelaufnahme / spindle taper ISO40 Drehzahl / spindle speed 8000 UpM / rpmTischaufspannfläche / table clamping area 1000x540 mmWerkzeugwechselmagazinplätze / number of places in tool changer 24 Gewicht ca. / weight ca. 5500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 880 mm, 730 mm, 730 mm

GERAL N.º do Projeto: 905698 Quantidade: 1 pcs. Fabricante: DMG MORI Tipo: NHX 5000 Controle: linha de solução Siemens 840 D Ano de Marca: 2016 Estado: Máquina usada Aprox. (horas): 26.341 Eixo em aprox. (hrs.): 9.666 DESCRIÇÃO MILL Curso em X 880 mm Curso em Y 730 mm Curso em Z 730 mm Velocidade máxima de travessia rápida em X/Y/Z 60/60/60 m/min Velocidade máxima de alimentação em X/Y/Z 6/6/6 m/min Porta-ferramentas HSK 63 Eixo de fresagem de velocidade máxima 20000 1/min Potência máxima a ED 10-40/100% 15/11 kW Revista de ferramentas 40 estações Trocador de paletes rotativo (a estação de configuração pode ser girada pelo motor) 2 vezes Peso máximo da peça por palete 500 kg Mesa rotativa controlada por NC Hidráulica de fixação OUTROS EQUIPAMENTOS Sondas de peças IR Deteção de quebra de ferramenta por meio de uma sonda R ...

x-travel: 600 mmy-travel: 410 mmz-travel: 520 mmSpindle Speed: 8000 U/min.table length: 840 mmtable width: 420 mmengine output: 15 kWtool change unit: 16 control: SIEMENS 810 shopmill rapid traverse X- and Y-axis: 36 m/minrapid traverse Z-axis: 20 m/mintaper ISO: SK 40 dimensions: 2200x2300x2300 mmweight: 2500 kgYoutube-Video-Links:https://www.youtube.com/watch?v=lGP4FX8j_Gghttps ://www.youtube.com/watch?v=WSiuzCJw6G4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dispositivo de perfuração de máquina de perfuração por explosão Para perfurar orifícios de iluminação, orifícios de saída de cabos, orifícios de refletor em armários de parede, vitrines e armários Mais artigos - novos e usados - podem ser encontrados na nossa loja! Custos de envio internacional sob consulta!

x-travel: 600 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: kWweight of the machine ca.: 6.5 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centro de usinagem de precisão, solução Siemens Sinumerik 840 D Controle de linha, cursos: eixo X 600 mm, eixo Y 630 mm, eixo Z 510 mm, 2 espinhos de trabalho 1-17.500 rpm, sistema de acionamento do motor de torque, equipamentos incluindo: distribuidor de óleo para mesa rotativa, amplificador de pressão pneumático, extensão do carregador 144 posições de ferramenta (2 x 72), módulo básico de sistema hidráulico de fixação, bomba de alta pressão de 70 bar, sistema de separação de névoa de emulsão, porta de carregamento automática, controle de consulta de ar, deteção de quebra de ferramenta indutiva, transportador de correia raspadora KNOLL 800 K-1/400, filtro de correia compacta de limpeza de refrigerante KNOLL FKA 1200 e muito mais.

Centro de usinagem de precisão, controle Siemens Sinumerik 840 D Solution Line, cursos: eixo X 400 mm, eixo Y 500 mm, eixo Z 425 mm, espaçamento do eixo 400 mm, versão com 2 eixos Z independentes, 5º eixo 2 eixos acionados diretamente, 2 - eixos de trabalho HSK-A63 1-17.500 rpm, motor de torque do sistema de acionamento, equipamentos incluindo: distribuidor rotativo, suportes de ponte de tensão, amplificador de pressão pneumático, carregador de ferramentas ges. 120 posições da ferramenta (2 x 60), hidráulica de troca de pressão, módulo básico de hidráulica de fixação, bomba de alta pressão de 70 bar, sistema de separação de névoa de emulsão, porta de carregamento automática, controle de interrogação de ar, controle de quebra de ferramenta indutiva, monitoramento da vida útil da ferramenta, transportador de correia raspadora KNOLL 800 K-1/400, filtro de correia co ...

1x Máquina de perfuração de mesa CNC Fabricante: TOS Tipo: WHQ Ano de Marca:1997 Controle: Heidenhain TNC 426 em 5 eixos Eixo X 2000mm Eixo Y 1400mm Eixo Z 1250mm Eixo W. 710 milímetros Eixo B 360 graus Diâmetro do eixo: 112mm Suporte do eixo: ISO 50 Velocidade máxima do eixo: 2000 rpm Superfície de fixação da mesa: 1400x 1600mm Trocador de ferramentas: 60 lugares Transportador de chips: Sim