mandriladoras e centros de usinagem usadas para venda (3,229)

uma máquina de fresagem de portal CNC bem preservada Dörries Scharmann] tipo FZ 25, construída em 1994, tabela 6000 x 2500 mm, distâncias de viagem X/Y/Z 6000/2500/2000 mm, passagem do portal 3000 mm, carga de mesa a cerca de 40 toneladas, com mudança automática de cabeça de moagem. Controlo CNC Heidenhain TNC426, dimensões aprox. 18 x 8 x 7 m, peso aprox. 174 a.

Ano de construção de 1983 Potência de acionamento Potência 83 kW Mesa de aperto mesa 2500 x 2500 mm massa de peça de trabalho na mesa Massa de peça de trabalho 20 t Largura de processamento na tabela 5770 mm Altura de processamento na tabela 2800 mm profundidade de processamento 1985 mm Diâmetro do eixo do tempo do fuso 200 mm Slide secção transversal Slide secção transversal 530 x 550 mm Equipamento adicional Cabeça de ângulo grande Cabeça angular pequena

: 14 mmBoring power: 15 mm: MK 2 bore depth: 70 mmthroat: 180 mm: bis 275 mm: 529 mmtable surface area: 250x220 mmcolumn diameter: 65 mmTotal height: 890 mmtotal power requirement: 0,6/1,0 kW: 420-2100 U/min.weight of the machine ca.: 63 kgMachine with CE mark!new machinDomestic equipments:- Stepless speed control- Table adjustment via rack- Digital speed display- Full motor protection- drill protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 55 mm: M 30 : M 36 : MK 4 spindle turning speed - stepless: 70-1.200 U/minspindle stroke: 140 mmthroat: 300 mmcolumn diameter: 145 mm: 615x430 mmdistance spindle /table: min./max. 150/735 mm: 2 x 14 x 224 mmfeed: 0,1 + 0,3 mm/UMachine height: 1850 mmweight: 380 kgdrive motor: 1,8/2,9 kWStandard equipment:- Lockable main switch with motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP- Infinitely variable speed adjustment- Digital speed display- Feed overload protection- Protection class IP 54- Spindle protection with electrical fuseItem 20.1Thread cutting device with foot switch, for thread cutting withStop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ! NEW FOR YOU AS A SERVICE !Machine leasing up to 60 months without down payment, without residual value,personal advice and individual leasing rate calculation on request. The data ...

x-travel: 600 mmy-travel: 410 mmz-travel: 470 mmwork height max.: 620 mmtable surface area: 600x380 mmnumbers of pallets: 2 turning speeds: 30-7000 U/minspindle diameter: 75 mmTool changer: 30 Control: Matsuura type: MX 3 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmthroat: 240 mmbore stroke: 110 mmturning speeds: 125 - 2850 U/min: 310 x 320 mmdistance drilling head - clamping area: max. 650 mmtotal power requirement: 0,75 / 400 kW / Voltweight of the machine ca.: 0,175 tdimensions: 0,95x0,8x1,75 inkl. Tisch mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 370 mmbore stroke: 200 mmspindle taper MT: 4 MKtable:: 580 x 460 mmcolumn diameter: 160 mmturning speeds: 75 - 2020 U/minfeeds: 0,1 - 0,2 - 0,3 - 0,4 mm/Utotal power requirement: 1,5 kWweight of the machine ca.: 700 kg.range L-W-H: 1,1 x 0,6 x 2,35 mm• machine base for clamping high workpieces• Digital Depth Gauge• Gearbox swivels 180 °• silent running through geärtete, ground oil-cooled gears• Tapping Function• electromagnetic clutch for drill feed• automatic feed• electric drive for table height adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mmthroat: 170 mmbore stroke: 50 mm: 16 mmspindle taper: MK2 spindle turning speed range: 50 - 2250 U/min: 320 mm: 145 mmtable surface area: 500 x 140 mmconnected load frequency: 230 Vtotal power requirement: 0,5 kWweight of the machine ca.: 90 Kgdimensions of the machine ca.: 0,5 x 0,45 x 0,84 mDrilling and milling machine with- variable spindle speed- Digital depth display- Left / right switch- Cross support- swiveling spindle head- Feeds via hand crank- Tool case with contentbut without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mmx-travel: 2500 mmy-travel: 1600 mmz-travel: 1000 mmspindle taper ISO: 50 turning speeds: 4-1120 U/minFeed: 5-2000 mm/minbore spindle stroke: 580 mmmain drive motor: 45 kWtable surface area: 1600x2000 mmtable load: 12,5 tControl: Heidenhain type: TNC 410 Angle head: chip conveyor: workpiece weight: 15000 kgtotal power requirement: 80 kWweight of the machine ca.: tdimensions of the machine ca.: 6,5x5x5x4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diâmetro do fuso: 80 mmx-viagem: 1100 mmy-travel: 750 mmz-travel: 1350 mmsurface: 1000 x 1000 mmtal power requirement: 6 kWpelho da máquina ca.: 5 tdimensionals da máquina ca.: 5x3x3 m• 3 eixos-D.R.O.

spindle diameter: 160 mmx-travel: 4000 mmy-travel: 2200 mmz-travel: 1500 mm: 270 mmspindle turning speed range: 20-2000 U/minControl: Heidenhain type: TNC530i table surface area: 3000x1600 mmtable load: 40 tspindle taper ISO: 50 spindle motor: 50 kWT-slot - width: 28 mmnumber of T-slots: 9 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine wurde überholtmachine is retofitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 560 mmz-travel: 560 mmControl: Siemens type: type of pallet-changer: size of pallet: 400x500 mmTable load: 300 kgfeed: 40.000 m/minspindle speed:: 20-8000 U/minspindle taper ISO: 40 Spindle capacity: 13/20 KWTorque: 191 NmTool changer: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mmx-travel: 2005 mmy-travel: 1860 mmz-axis: 1620 mmw-axis: 706 mmcontrol: Siemens 840 C SW5.1 turning speeds: 2500 U/minsurface area: 2500 x 2000 mmspindle taper ISO: 50 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSK50 tool holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mmx-travel: 2000 mmy-travel: 1700 mmControl: Fanuc spindle taper ISO: 50 z-travel: 1400 mmTable area: 1250x1500 mmTable load: 5000 kgspindle turning speed range: 35-3000 U/minTool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kWweight of the machine ca.: . tdimensions of the machine ca.: 1250 x 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Comprimento do quadro: largura 2000 mm: cargatable de 1800 mm: 12,5 tse - longitudinal: 1.250 mmse rotativo: 360 Grad posicionamento: 4 x 90 feeds - longitudinal: 0,63 - 2.000 mm/mintotal prescrição de potência: 4 kWpeso da máquina ca.: 7,6 t

spindle diameter: 90 mmx-travel: 2000 mmy-travel: 1250 mmz-travel: 1250 mmspindle turning speed range: 8-1600 U/minspindle stroke: 720 mmFeed: 1-2500 mm/Uweight of the machine ca.: 9,1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mmx-travel: 3000 mmy-travel: 1500 mmcontrol: Heidenhain TNC 355 taper ISO: 50 w-axis: 600 mmTable dimensions: 1200 x 1500 mmtable load: 5 tspindle turning speed range: 12 - 2300 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmControl: Heidemhain type: 426/430 spindle speed:: 18000 spindle taper: HSK 63 surface area: 1250x700 mmRotary table: 700 mmTable load: 1000 kgb-axis: Schwenkopf 0,001 °c-axis: 0-360° Rundtisch 0total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 700 mmz-travel: 630 mmControl: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mmTable load: 400 kgnumber of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mFEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mmx-travel: 1000 mmy-travel: 1200 mmz-travel: 1200 mmfeed movement: 710 mmspindle taper ISO: 40 turning speed range: 8 - 1600 U/mintable-size: 1120 x 1000 mmtable rotating: 360 °table load: 2,5 ttotal power requirement: 11 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 4,5 x 3,3 x 3 mseparate switchboard, rapid feed, some tool holders, without face plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mmthroat: 320 mmbore stroke: 135 mmthread dia.: M 20 mmspindle turning speed range: 72 - 2600 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Uspindle taper: MT 3 table surface area: 370 x 360 mmDistance spindle/table max.: 850 mmdistance spindle/base plate: 1400 mmvoltage: 400 V / 50 Hztotal power requirement: 1,0 - 1,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,2 x 0,7 x 2,3 m• with cooling device• threading attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mmx-travel: 900 mmy-travel: 900 mmz-axis: 1200 mmw-axis: 800 mmtable surface area: 900 x 1200 mmrotation movement: 360 Gradtable load: 6,0 tturning speeds: 25 - 1400 U/minspindle taper ISO: 40 voltage: 380 V / 50 Hzdrive milling spindle: 9,2 kWtotal power requirement: 35 KVAweight of the machine ca.: 10 tdimensions of the machine ca.: 4,5 x 2,8 x 2,5 m• Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,• radial face slide Ø 600 mm.traverse distance: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore diameter: 620 mmspindle diameter: 130 mmbore depth: 320 mmfeed stepless: 0 - 12 mm/minturning speeds: 10 - 70 U/minvoltage: 380 V / 50 Hztotal power requirement: 4 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,0 x 1,2 x 1,3 mtransportable drilling out work, completely ready for connectiongear of drill spindle runs over LENZE planetary driveadvanced feed with LENZE direct current motor, output: 160 wattclockwise and counterclockwisewith tool holder for Ø 420 x 620 mm,tool holder for tooling equipment fabri. LENZ LPAS 3,diverse turning steelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 560 mmz-travel: 560 mmtable surface area: 500x400 mmcontrol: Siemens type: 840 D spindle taper ISO: 40 spindle turning speed range: 8000 U/min: type of pallet-changer: 2 Rotary table: 360 °Cooling through the spindle: barTool changer: 40 chip conveyor: total power requirement: kWweight of the machine ca.: 11,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mmx-travel: 1200 mmy-travel: 1000 mmz-travel: 325 mmadjustment of cross-rail: 785 mmdistance between columns: 1600 mmdistance spindle - column min./max.: 215 / 1100 mmspindle feeds - stepless: 1 - 6000 mm/minspindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/mintable surface area: 900 x 1500 mmworkpiece weight: 2000 kgspindle drive: 5 kWtotal power requirement: KVAweight of the machine ca.: 6 tdimensions of the machine ca.: 3,3 x 3,0 x 2,8 mdimensions of the machine ca.: 3,3 x 3,0 x 2,9 m• with RENISHAW -detector OMP 40,• mechanical refurbishing and new control HEIDENHAIN TNC 410 in year 2002The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 bore stroke: 125 mmShort spindle: MK 3 throat: 210 mmMachine table - usable table surface: 390x390 mmtable load: 65 kgspindle turning speed range: 150-2.500 UpMPower requirement: 16 Atotal power requirement: 1,5 kWOverall size: 750x450x1745 mmweight of the machine ca.: 187 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 18 mm: M 12 : M 14 : MK 2 : 225-4.300 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel total power requirement: 0,37/0,55 kWMachine height: 840 mmweight: 110 kgStandard equipment:- Main switch with motor protection switch lockable- Reversing switch for clockwise and anti-clockwise rotation- Speed adjustment stepless- Protection IP 54- Mushroom pushbutton (latching) for EMERGENCY STOP- Spindle protection with electrical protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 10000 U/minrapid traverse: 35 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 900 mmy-travel: 800 mmz-travel: 970 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 12000 U/minrapid traverse: 50 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 20 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 10000 U/minrapid traverse: 35 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.