outras máquinas de alimentos usadas para venda (901)

Venda um torrador elétrico de tambor feito de aço inoxidável com uma capacidade de aproximadamente 10 kg. Versátil para torrar frutos secos, amêndoas, amendoins, café e grãos de cacau. Ideal para manufatura, loja agrícola, confeitaria, café ou pequena produção. O tambor rotativo de aço inoxidável garante uma torração uniforme, e a temperatura é ajustável através do controlador de temperatura. Fácil de operar através do interruptor ligar/desligar e controlar a temperatura. O dispositivo é móvel (em rodízios) e, por isso, pode ser usado de forma flexível. Importante: O dispositivo requer uma ligação de alta tensão (400 V / corrente trifásica). Por favor, verifique antes de comprar se existe uma ligação adequada disponível no local de instalação. Equipamento / Dados: Torrefador elétrico de tambor Ligação: Alta tensão (400 V / corrente  ...

Moinho de Manteiga de Nozes Feli NBM-200 – Aço Inoxidável, até 80 kg/h Vende um potente Feli NBM-200 (Moinho de Manteiga de Frutos Secos) feito de aço inoxidável para produção de manteiga de frutos secos, pastas e moagem fina. Ideal para manufatura, delicatessen, confeitaria, loja biológica, café ou produção de pequenos alimentos. O NBM-200 consegue suportar cerca de 80 kg de manteiga de amendoim torrada por hora. Além dos amendoins, outros frutos secos, amêndoas, frutos secos e até legumes também podem ser processados em puré e cremes para untar. O puré normalmente não ultrapassa os 30 ºC, ideal para um processamento suave. A máquina é inteiramente feita de aço inoxidável, pesa cerca de 32 kg e é muito fácil de operar (liga/desliga). A limpeza é simples e pode ser feita em cerca de 15 minutos. Se as porcas ficarem presas no funil, podem ser trazidas de ...

Cortador Stephan UMC 12 – Conjunto completo com unidade de controlo de temperatura, bomba de vácuo e separador de água, pronto para uso imediato Dados chave: Fabricante: Stephan (A. Stephan u. Söhne GmbH, Hameln) Tipo: UMC 12 Masch.-N.º: 719.908.01 Ano de Fabricação: 1993 Capacidade da taça: 12 litros Motor: 1,5 / 1,9 kW, duas velocidades 1.400 / 2.800 rpm Ligação: 380 V, 50 Hz, IP 54 Fabricado na Alemanha Descrição: Um Stephan UMC 12 totalmente funcional é oferecido como um sistema completo de vácuo controlado por temperatura para misturar, esmagar, emulsionar e termificar sob vácuo. Trabalhar a vácuo garante emulsões e cremes homogéneos e sem bolhas, sem aprisionamento de ar, e protege produtos sensíveis à oxidação – ideais para laboratórios, fábricas-piloto, desenvolvimento alimentar, bem como aplicações cosméticas e farmacêuticas. A máq ...

Fully automatic coffee machine MELITTA Cafina XT4, S/N 53644, fixed water connection, grinder for coffee beans (1G), cocoa/instant module (2IS), without key, separate hot water outlet (WW), Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Water dispenser BLUPURA Blusoda Hot 30, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Fully automatic coffee machine ANIMO Optibean 3 XL Touch, 1x ceramic grinder, 1x cocoa powder, 1x milk powder, fixed water connection, without power cable, 2x keys, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

QUANTIDADE. 1 LINHA DE PRODUÇÃO DE MASSA / NOODLES EM SEGUNDA MÃO – PARA MASSA CURTA E LONGA Fabricante: Macri (Itália), Braibanti (Itália); Capacidade: aproximadamente 260 kg/h; Construído: 1990 & 2000, Estado: ainda na fundação, parado em 2022 Descrição geral: A fábrica de massas trabalha atualmente com 2 prensas de 160 Kg/h, uma para massa longa e outra para massa curta. A capacidade de secagem de cada secador é de +/- 500 kg. Para preencher todos são precisos +/- 15/16 horas, ou seja, dois turnos de trabalho. Área necessária: 805 m², aproximadamente L x L x H = 35 m x 23 m x 7 m

Equipment: Vacuum,Manufacturer: VAKUMIX,Condition: used,Volume: 1,980,Vacuum: 1,0,Max. permissible Operating temperature : 99,Lower shelf: conical bottom,Top bottom: Top shelf removable / foldable,Design: upright,Stand shape: Frame,Diameter inside: 1.300,Cylindrical height: 1.095,Total height: 2.760,Wall thickness underbody: 8,Wall thickness cylinder: 8,Wall thickness upper floor: 20,Year of construction: 2009,Technical documentation: Drawing,Type plate: Yes,Outlet: Flange,Outlet : 280,Note: slight adhesions,Remarks: Height-adjustable frame made of V2A various connections in the top floor Topsoil leaves

Condition: used,Other: The M-Pulse metal detector is a highly sensitive device for the reliable detection of metallic foreign bodies. An inductive measuring method with a balanced coil system is used. The metal detector is exclusively intended to detect metallic foreign bodies in pasty or liquid media. A more detailed description of the machine can be found in the existing owner's manual.

Equipment: Agitator,Condition: Factory new,Other: High-speed mixer with massive, non-removable stirring shaft, balanced for concentricity in the speed range For liquid media up to 600 mPas and a density of up to 1.2 kg/l in a 1000L IBC container 3-blade mixing propeller 138mm screwed in at the end of the stirrer shaft Mixing propeller from a single cast, highly polished Power: 0.75 KW Speed: 1410 rpm Voltage: 3PH 400V 50Hz IE3 with 3 PTC conductors Material in contact with the product: 1.4404 (V4A) Agitator weight approx.: 16 kg Stainless steel crossbar 1.4301 (V2A), with 2 tension hooks and 4 side carrying handles

Equipment: Agitator,Condition: used,Manufacturer agitator: PRG Präzisions-Rührer GmbH,Agitator: Propeller,Speed: 965,Bottom bearing: No,Voltage volt: 400,Power: 8,Current interferer: No,Material in contact with the product: V4A 1.4571 (AISI316),Type plate: Yes,Agitator equipment: 1 small bump in the fan cover,Wavelength: 500,Shaft diameter: 125,Blade diameter: 320

Equipment: Agitator,Condition: Factory new,Technical documents: Drawing,Agitator: Propeller,Agitator arrangement: eccentric in the topsoil,Speed: 1,430,Bottom bearing: No,Voltage Volt: 400,Power: 2,2,Current interferer: No,Material in contact with the product: V4A 1.4571 (AISI316),Type plate: Yes,Shaft length: 1460,Shaft diameter: 42,Blade diameter: 200

Equipment: Agitator,Condition: used,Manufacturer agitator: TMR,Agitator: Propeller,Speed: 1.430,Bottom bearing: No,Voltage Volt: 400/690,Power: 4,Current interferer: No,Material in contact with the product: V4A 1.4571 (AISI316),Type plate: Yes,Agitator Equipment: Principle drawing available (slight dimensional deviations present) Agitators were only used for a short time according to the previous operator 1 agitator with a small dent in the fan cover of the motor (see photos), Shaft Length: 740,Shaft Diameter: 50,Wing Diameter: 220

Equipment: Agitator,Condition: used,Other: Agitator incomplete Rotor (propeller) missing diameter stator top approx. 350 mm Diameter stator bottom approx. 300 mm,Manufacturer agitator: Ystral,Agitator: Jet mixer,Speed: 730 / 1475,Bottom bearing: No,Voltage Volt: 380,Power: 3.5 / 13,Current interferer: No,Material in contact with the product: V2A 1.4301 (AISI304),Nameplate: Yes,Wavelength: 600,Shaft diameter: 75

Equipment: Agitator,Condition: factory new,Agitator: Beam stirrer,Speed: 17,Bottom bearing: No,Voltage volt: 230/400,Power: 3,Current interferer: No,Material in contact with the product: V4A 1.4401/04 (AISI316),Type plate: Yes,Agitator Equipment: Wavelength measured from the underside of the lantern Diameter of stirring blades: approx. 1 x 1,130 mm, 1 x 1,530 mm, 1 x 1,930 mm Stirrer blades must be welded to the agitator shaft on site before using the agitator, one agitator is missing the lantern, Wavelength: 2620,Shaft Diameter: 60

Equipment: Agitator,Condition: used,Other: Also sold with matching mixing tank, see #8336.,Manufacturer agitator: Ystral,Agitator: Jet mixer,Speed: 730 / 1455,Bottom bearing: No,Voltage Volt: 400,Power: 13 / 19,Current interferer: No,Material in contact with the product: V2A 1.4301 (AISI304),Type plate: Yes

Condition: used,Other: Drive power: 11 kW Areas of application: Mixing / homogenizing and pumping over emulsions and pastes,Total height: 650,Total length: 1,200,Total width: 460

Condition: used,Other: Overall width: 1,950 mmTotal depth: 1050 mmTotal height: 1,400 mmHot mixer: approx. 10 litres - 5.5 kWCalter mixer: approx. 25 litres - 2.2 kWFflange closure of the hot mixer may be missing and would have to be replaced on site,Manufacturer: DIOSNA Dierks & Söhne

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 22 kW - 400 V - 50 Hz - 2.950 rpm - 38,8 A. P(inlet): 1.013 hPa. P(outlet): 800 hPa. PS: 820 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 372 cfm. Sound level: 89 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

Dados técnicos: Máquina de filetear: Fabricante: PRIMA s.r.l Modelo n.º: WCLSE-1000/1 Número de série 2180553-01 Capacidade 200-800 kg/h Caracol trepador: Máquina: Transportadora Fabricante: PRIMA s.r.l Tipo: Transportadora Coclear Modelo n.º: CHT50B003 Número de Série: 2180553-03 Schnetzler: Máquina: Dispositivo de Corte Fabricante: PRIMA s.r.l Modelo n.º: CHT50B003 Número de Série: 2180533-02 Dispositivo de elevação e inclinação: Fabricante: Frontmatec Hygiene GmbH Tipo 27000 Para acomodar carrinhos de carga padrão de 200 e 300 litros para o Uso racional na indústria alimentar Ano de construção: 2019

Incomplete Cream separator (Skimmer). Self cleaning. Machine comes with the frame, bowl, hood, horizontal and vertical axle., Additional features:, � ��Excluding:, - Motor., - Motorcover., - Baseplate and feet, - Waterbox with water valves., - Inlet / outlet pipes., - Control panel., - Service tools for maintenance., Additional with this stocknumber several unused and used spare parts., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.450 rpm, Weight: 1.420 kg, Dimensions: 145 x 110 x 175 cm

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed ...

Refrigerator METRO approx. 40x80h cm

Fully automatic coffee machine DELONGHI Magnificia

Complete powder plant existing out of Evaporator (4-effect, TVR), Spray Dryer, Fluidbed Dryer, 2x Crystallization Tanks and a Big Bag Filling Station. Previously used for skim milk / whole milk / whey / permeate or 35% protein powder. Still mounted on its original postion inside the factory in Spain. Line per direct available., Infeed capacities evaporator:, - Skim milk: 7.200 kg/h @ 9% TS., - Whole milk: 4.800 kg/h @ 12,5% TS., - Whey: 8.150 kg/h @ 6% TS., - Permeate: 8.835 kg/h @ 4,5% TS., - 35% Protein: 2.880 kg/h @ 10% TS., - Water for startup and CIP: 10.000 ltr/h @ 2 bar., - Water for cooling seals in vacuum pumps: 7.000 ltr/h @ 25 °C - 2 bar, demineralized., - Water for safety / firefighting should be available at 7.000 ltr/h @ 2 bar., - Water for condenser cooling: 30.000 ltr/h @ 28 °C - 2 bar., - Ice water for flash system: 2.000 ltr/h @ 3 °C - 2 bar., - Saturated dry steam:  ...

APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and  ...