outras máquinas para trabalhar o metal usadas para venda (11,483)

Pneumatic press>br>incl. tool and foot pedal>br>see pictures >br>condition: untested (6)

Polishing bench with 2 polishing brushes>br>grinding wheel diameter 250 mm>br>Number of stations 2 pieces>br> connection voltage 230 V>br>speed 2850 rpm>br>Total power requirement 1.5 kW>br>Machine weight approx. 25 Kg>br>Dimensions L x W x H 0.65 x 0.32 x 0.35 m >br>Condition: never used / new (5)

195 cm height 40 cm depth 94 cm width

FAG 6319-2ZR Deep Groove Ball Bearing - 95 x 200 x 45 mm - N1 25069217 - United Kingdom

Technical data Note: There was no original machine documentation. All subsequent technical data were read from the nameplate to the best of our knowledge and taken from publicly available sources. Manufacturer: COMCO Type: WE 680/4 Year of Make: 1987 Serial Number: 100 Machine Type: Hydraulic Press Operating voltage: 380 V Frequency: 50 Hz Motor power: 11 kW Max. pressure: 200 bar Press force: 300 kN Air pressure: 6 – 10 bar Machine weight: approx. 3,000 kg Configuration 4-post design Hydraulic power unit Safety Light Curtain (SICK) Protective grille / enclosure Electrical control cabinet with control panel Pressure gauge (pressure gauge) Hydraulic control with valve block

FESTO Pneumatic Cylinder - DSBC-63-1350-PPVA-N3 - p max: 12 bar - 1463483 M108

equipped with 4 castors

Welding rotary tilting table radio remote control - 2 x welding current transmissionTable diameter 1000 mmTable load 1200 kgSwivel range 0 - 135 degreesSpeed 0.1 - 1.0 rpmTotal power requirement 1.5 kWMachine weight approx. 0.8 t Condition: never used / new (5)

Sheet metal bending machine with special dimensions:>br>- Capacity 700 x 4 mm>br>- Conical bending>br>- Swing-out top roller>br>- Safety device emergency exit line>br>- Documentation>br>- 400V>br>Sheet width 700 mm>br>Sheet thickness 4.0 mm>br>Column width 720 mm>br>Upper roll diameter 95 mm>br>Total power requirement 1.1 KW>br>Machine weight approx. 0.37 t>br>Dimensions approx. 0.95 x 0.76 x 1.25 mm

Height 760 mm, mounted on steel beam, travel 7150 mm, incl. REXROTH MS2N07-B1BNN-CMSH1-NNNNE-NN 3-phase motor

Various tool holders, most of them with tools With lattice box

Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672

Welding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side bolsters 165mmheight adjustable from approx. 840 - 890mmunderside ribbed for reinforcement.incl. floor bearingaccessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included in the scope of deliveryTable length 1200 mmTable width 800 mmTable height 840 - 890 mmMachine weight approx. 0.3 t Condition: never used / new (5)

with attached refrigerator

Duo blasting cabinet10 PET plates to protect the windows10 PET plates to protect the fluorescent lighting2 foot pedals2 blasting guns 6 ceramic nozzle inserts (6 mm diameterInternal dimensions 2060 x 1270 x 86 mmOperating pressure 2.5 - 8.0 barMachine weight approx. 0.23 tDimensions L x D x H 2.08 x 0.73 x 0.8 m Condition: never used / new (5)

NC Rotary Table Speed rotary table (B-axis): 40 1/min Tool magazine Tool stations 80 pieces, 60 of which are still populated Coolant pressure 50 bar including 2 additional work pallets

Welding turntable with- foot switch- tilt/swivel by hand - speed infinitely adjustable - 250 amp welding current transmission - hole in face plate 40mm.Table diameter 350 mmTable load 100 KgSwivel range 90 degreesSpeed 0.2 - 2 infinitely variable rpmTable load 50 kg. verticalMachine weight approx. 0.055 tDimensions approx. 0.46 x 0.4 x 0.42 m Condition: never used / new (5)

Jaw width: 125 mm With hydraulic connection

FESTO VACF-B-K1-1-10-EX4-M Magnetspule / Solenoid coil , NEW , Mat-Nr. 8059806

Welding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side bolsters 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.incl. floor bearingaccessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included in the scope of deliveryTable length 2990 mmTable width 1490 mmTable height 850 - 900 mmMachine weight approx. 0.8 t Condition: never used / new (5)

Electrode welding machine welding current 275 ampssee pictures

VMB-Ecoline 400-30 cleaning system incl. accessories

6-axis industrial robot for oxy-fuel flame cutting Manufacturer: Kawasaki Type: FA06E with cutting torch RHÖNA BIR PMY Year of construction: 2012 Load capacity robot: 6 kg Reach: 1550 mm Repeatability: ±0.05 mm Cutting process: Oxy-fuel cutting Cutting torch: RHÖNA BIR PMY Suitable for oxygen/propane or oxygen/acetylene Robot controller: Kawasaki D40F-E002 Supply voltage: 400 V AC Mains connection: 3 phases / 50 Hz Current consumption under full load: 8 A Breaking capacity: 5 kA Weight: approx. 500 kg Media guidance via hose package on the robot arm Without protective enclosure / safety cage Suitable for automated cutting of steel parts and contours

Mitutoyo measuring equipment

Technical data Manufacturer: Hurco Model: VMX40 Machine Type: Vertical CNC Machining Center Year of manufacture: 12/2000 Serial Number: M442-01219120AFC Machine Number: Q-6695 Control: Hurco Ultimax Operating hours: 37,207 h Voltage: 380 V Frequency: 50 Hz Connection: 63 A Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Emergency stop available Network connection (10BASE-T) Interfaces: Port 1 / Port 2 / Coax Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation.

Lumiflex ULZS-4/1 Accident Protection Device Control Unit