outras máquinas para trabalhar o metal usadas para venda (10,871)

Plasma cutter with: Digital display. Surge protection. Plasma torch. Underground cable. Reducing valve with moisture separator. Equipped with IGBT technology Welding current 15 - 40 A Cutting capacity 1 - 16 mm Open-circuit voltage 96 V Compressed air connection min. 4 bar Connected load 3.6 kW Connection voltage 230 V Weight 9.0 kg Dimensions LxWxH 371 x 153 x 232 mm Condition: new / unused Auction-ID: A7-52321-134

Maximum speed: 2930 revolutions per min, Maximum throughput: 1200 liters per hour, Maximum load: 30kg, Inner diameter drum: 382mm. Equipped with: (1x) storage tank Rösler VB 800, serial number 92519, (1x) dosing unit Rösler DP1, serial number 92521, year of construction 2019. Includes control box with control display and signal light. Main drive: 5 kW, total rated installation power: 6 kW. Pre-fuse: 35 A. Maximum medium temperature: 50 degrees. Auction-ID: A1-51283-11

Wire range 2-6 mm, cutting length 25-200 mm, feed speed 120 m/min, cutting capacity 270 pieces, equipped with driven decoiler, machine length approximately 6500 mm Auction-ID: A1-50970-16

diameter:210 mmweight of the machine ca.:0,05 tturning speeds:4200 Bore:75 mmclamping diameter:254 mmdimensions of the machine ca.:0,6 x 0,5 x 0,4 m2-jaw power operating chuck with draw pipe and various jaw sets.

Kit consisting of electric strapping machine + reel transport trolley Auction-ID: A7-52172-78

Consisting of 2 digital calipers (150 mm), never used Overall dimensions: 200 x 100 x 200 mm Weight: 2 kg Auction-ID: A7-52172-314

Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm Condition: new / unused Auction-ID: A7-52321-40

Delivered on 5 pallets Auction-ID: A1-51283-318

Consisting of 2 digital calipers (150 mm), never used Overall dimensions: 200 x 100 x 200 mm Weight: 2 kg Auction-ID: A7-52172-367

bore capacity in steel (diameter):12 mmthroat:300 mmbore stroke:80 mmtotal power requirement:1,5 kWweight of the machine ca.:1,2 tdimensions of the machine ca.:0,6 x 0,7 x 2,1 mAppr. 100 year old column boring machine, complete overhould and ready to operate- swivel table, base table- taper tool chuck- base motor with drive belt to overhead spindle

Including square, swing square and lastester Auction-ID: A1-50970-212

• System type: Manual Multistage ultrasonic cleaning system (Manual Multistage). • Number of tanks: 5 independent tanks (e.g. for ultrasonic cleaning, rinsing, hot rinsing, preservation and drying). • Capacity per tank: approx. 150 to 230 litres (depending on the exact specification for industrial workpieces). • Material: High-quality, robust stainless steel (AISI 304 / AISI 316 for the encoders) with thermoacoustic insulation. • Lifting platform: Equipped with pneumatic lifting platforms per relevant tank to immerse heavy components and baskets in a material-friendly way. Ultrasonic & heating power (per ultrasonic tank) • Ultrasonic power: 1700 W (peak power up to 3400 Wp-p). • Operating frequency: 40 kHz with automatic frequency sweep system (±2%) for uniform sound distribution without \"blind spot\". • Oscillating elements: High-performance titanium-steel ...

length:1600 mmwidth:1000 mmplate height:200 mmweight of the machine ca.:1 tdimensions of the machine ca.:1,6 x 1,0 x 1,3 mHardstone measuring plate with support desk and 2 tailstocks

working area:2500 mmFree moveable 6-axis measuring device- operating software- W-Lan- ball tracer

Basket size LxWxH:600 mmMax. basket weight:80 kgNo. of washing chambers:1 Temperature for washing water:60 °CElectrical heating power:4 kWtotal power requirement:5 kWLoading:Höhe bis 300 tank capacity:50 lCapacity:60 l/minMachine size LxWxH:0,75 x 1,0 x 1,2 mStainless steel high pressure cleaning machine for industrial use with basket diameter 600 mmWorkpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets- pneumatic spring supported machine lit- stainless steel driven basket- spraying bars and pump stainless steel design- loading basket with Jog function

x-travel:650 mmy-travel:450 mmz-travel:420 mmcontrol:MAKINO Hyper i U-axis:± 75 mmV-axis:± 75 mmmax. size of workpiece LxWxH:1000 x 800 x 400 mmworkpiece weight:max. 1500 kgTable dimensions:910 x 710 mmweight of the machine ca.:5 tDimensions (L/W/H):3 x 3 x 2,3 mmMemory:10 GB Wire EDM in good condition.

Consisting of: (1x) precision clamping and measuring set in wooden box, (1x) CV instruments hardness tester, Intrumatic, (1x) TorqMaster torque wrench in case. Auction-ID: A1-51283-116

bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmDist. spindle nose & working surface base:350 - 1260 Spindle travel:315 max. boring diameter:40 mmDistance between spindle axis and column:350 - 1260 spindle taper:4 MKRange of spindle speeds:22,4 - 2800 Number of spindle speeds:16 Number of spindle feeds:16 Table:500 x 630 Travel of spindle head:900 mmtotal power requirement:3,5 kWdimensions of the machine ca.:2150x1070x2840 mfeed:0,09 - 1,5 m/minweight of the machine ca.:3 t

Technical data of the blasting vessel with extraction: Capacity 80 litres. Length of the hose 2.5 m. Working pressure 60 - 125 PSI. Air consumption approx. 250 - 600 l / min Packaging dimensions 102 x 46 x 51.5 cm. Weight Approx. 36 kg Very useful for blasting places on large objects or outdoor objects. Delivery incl. microfilter with extraction. Condition: new / unused Auction-ID: A7-52321-192

Test range: 25-110 HRE, 58-131 HV Auction-ID: A1-51283-148

Automated production plant for the production of carbon prepregs (1500 x 1500 mm), footprint 22,000 x 1,300 x 3,000 mm, energy supply 400 V 50 Hz max. 15 kW, compressed air 8 bar DN 8 mm, production system consisting of storage, gripping cutting unit, feed table and safety equipment, rejection belt The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-51921-18

\"Rofin\" laser source, maximum tube length 8500 mm, maximum material weight 35 kg/m, equipped with charging station, unloading station, central control, 2-door control cabinet, underrunning chip removal conveyor, air buffer tank, \"Donaldson\" filter extraction unit type 2DFP4-SPRK, cooling unit, optical protection Auction-ID: A1-51486-2

faceplate diameter:4000 mmswing diameter:4300 mmturning height:2500 mmmax. workpiece weight:63 ttotal power requirement:125 kWweight of the machine ca.:134 tdimensions:6100x10400x8400 mmUsed Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

1x precision level; 1x dial gauge with flexible arm; 1x humidity meter Auction-ID: A1-51016-101

Individual filter height 1550mm; ø 180 mm; 5x dust bag; knock function; channel ø 300mm; with control cabinet. Auction-ID: A1-51016-19

Including machining parts Installation size: approx. 2400 × 8000 × 1800 mm The information shown is deduced or taken on board the machine and may not accurately represent the real performance of the machine. Thorough on-site inspection is recommended. The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods that do not comply with EC regulations or are destined for countries to which export is required. Auction-ID: A7-52055-1

SKF TIH 060 – induction heaterSKF type TIH 060 induction heater for controlled heating of rolling bearings and other ring-shaped metal components for thermal assembly. Used condition, unchecked. Scope and condition according to illustrations. Auction-ID: A1-51933-59

must be demoted yourself lifting bridge and forklift is available and can be used machine is in working condition Auction-ID: A3-46118-11479

Maximum working width is 1 meter Forklift at your disposal Auction-ID: A3-46118-15018

Auction-ID: A1-51016-120