outras máquinas para trabalhar o metal usadas para venda (11,079)

Manufacturer: Röders Model:RFM760 Machine Type: Milling Machine Year of Manufacture: 2000 Control Software: RMS6V3.15 (211) X / Y / Z Travel: 760 x 550 x 300 mm Table Size: 860 x 550 mm Spindle: Fischer MFW-1230/42 - 42,000 RPM (new December 2022) Spindle Taper: HSK E40 Tool Changer: 25-position with laser length and diameter measurement 3D Probing: IR 3D touch probe for workpiece measurement Dust Extraction: Yes (graphite) Cooling: Coolant unit and spray cooling for tool and workpiece Tool Shrink Fit Unit: Röders shrink fit unit included Machine Weight: 6,500 kg Find more here - / Contact us at -

Manufacturer: Kunzmann Model: WF650 Machine Type: Universal Milling Machine Year of Manufacture: 2013 CNC Control: Heidenhain iTNC 530 X / Y / Z Travel: 650 x 500 x 450 mm Table Size: 1100 x 600 mm Spindle Speed: 1 to 6,500 RPM (steplessly variable) Spindle Power: 9.0 kW at 100% ED / 13.0 kW at 40% ED Tool Changer: 20-position automatic Tool Measurement: Heidenhain TT 449 automatic tool measurement 3D Touch Probe: Heidenhain infrared 3D probe for workpiece measurement Feed Rate: X/Y 25 m/min, Z 20 m/min Power Supply: 400 V / 50 Hz Machine Weight: approx. 5,700 kg Condition: Excellent - top maintained Find more here - / Contact us at -

CNC verical machining center Type: DMC 835 V Manufacturer: Deckel Maho Year: 2006 Control: Heidenhain iTNC 530 Total hours: 20,579 Spindle hours: 6,598 X: 835 mm Y: 510 mm Z: 510 mm Tool magazine: 20 positions Spindle cone: SK 40 Chip conveyor Accessories: weldon holders collet clamps, about 40 pcs vihorlat 160 vices 2 pcs other vices, clamps, washers Machine in good condition, under power Find more here - / Contact us at -

Manufacturer: HAAS Model: VF6 SS Year of Manufacture: 2008 Machine Type : Vertical Machining Center - Control: Haas CNC Axis Travels - X axis: 64 inches (1,625 mm) - Y axis: 32 inches (813 mm) - Z axis: 30 inches (762 mm) Spindle - Spindle speed: 12,000 RPM - Spindle taper: 40 taper (CT40 / BT40) - Spindle type: inline direct-drive, high-efficiency (HE) - Spindle motor: 30 HP Tool Changer - Type: side-mount automatic tool changer (SMTC) - Configuration: high-speed Super Speed ATC Electrical Requirements - Voltage: 360/480V - Phase: 3-phase - Frequency: 50/60 Hz - Full load: 40 amps - Largest load / short circuit: 70 amps - Interrupting capacity: 10,000 amps - Enclosure: NEMA Type 1 - indoor use only Find more here - / Contact us at -

wire diameter - max.: 2,5 mmwire diameter - min.: - mmworkpiece length - max.: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Mazak Model: Super Turbo X510 MkII Year of Manufacture: 2007 Machine Type : Flatbed CO2 laser cutting machine CNC control: Mazatrol Preview Operating hours : 27.000 h Technical Specifications - Working area: 3050 x 1525 mm (5 ft x 10 ft) - X axis travel: 3235 mm - Y axis travel: 1545 mm - Z axis travel: 100 mm - Laser type: CO2 continuous wave - Laser power: 2,500 W or 4,000 W depending on version and resonator fitted - Maximum workpiece size: 3050 x 1525 x 22 mm - Maximum table load: 805 to 930 kg - Rapid traverse speed: 24 m/min (945 IPM) - Maximum cutting speed: 20 m/min - Machine weight: approximately 12,700 to 13,900 kg depending on configuration Maximum Cutting Thickness by Material - Mild steel: up to 22 mm - Stainless steel: up to 12 mm - Aluminium: up to 8 mm Find more here - / Contact us at -

wire diameter - max.: 2 mmwire diameter - min.: - mmworkpiece length - max.: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Deckel Maho Model: DMU 50 eVo Linear Year of Manufacture: 2007 Machine Type : Milling Machine Installed power: 44 kVA Supply voltage: 400V / 50Hz Machine hours (power on): 24,610 h Spindle hours: 9,820 h Find more here - / Contact us at -

Manufacturer:Agie Model: Agiecut Challenge 2 Year of Manufacture: 2001 Machine Type : Wire EDM Machine Find more here - / Contact us at -

Manufacturer: Kellenberger Model: Kel-Vision URS 125/430 Machine Type : Grinding Machine Condition : Defective Electrical Specifications - Supply voltage: 3 x 400 V - Frequency: 50 Hz - Working voltage: 3 x 400 V - Control voltage: 230 V - Nominal current: 28.5 A - Main fuses: 35 T Find more here - / Contact us at -

Manufacturer: Jung, Model: JF 520 Year of Manufacture: 1979 Machine Type : Grinding Machine Electrical Specifications - Voltage: 380 V - Phases: 3 - Frequency: 50 Hz - Nominal current: 30 A - Supply fuses: 35 A - Control voltage: 220 V Find more here - / Contact us at -

Manufacturer: Chiron Model: FZ 08K S Magnum SK Year of Manufacture : 2007 Type of Machine : Vertical Machining Center Factory overhaul: 2017 (Chiron CMS) Operating hours: approximately 22,500 h CNC control: Siemens 840D (PCU 20 / NCU 572.4) Spindle: water-cooled motor spindle, 15,000 rpm Spindle last replaced: September 2025 Last major service: October 2025 (Chiron, 4,000 h interval) NC swivel head swivel range: -20 degrees / +115 degrees Travel X / Y / Z: 450 mm / 270 mm / 310 mm Rapid traverse X / Y / Z: 75 m/min Acceleration X / Y / Z: 1g / 1.5g / 2g Tool positions: 40 x HSK-A 40 Chip-to-chip time: 2.6 seconds vertical (DIN) --------------------------------------------------------------- Equipment and Accessories Included Rotary table package AWU 160 with D105 mm (positioning axis) Hainbuch Spanntop collet chuck D100 6th side machining attachment Part removal han ...

Manufacturer: Keyence Model: IM-8000 Type: Image Dimension Measurement System Software Version: B-13.0.0.28-11.07-20.07.09.01 / A2.05-A1.27-A3.03-9B.06-9B.06-02.01-03.02 Sensor: 20-megapixel CMOS Stage Size: 300 x 200 mm Measurement Capacity: Up to 300 features in a single measurement cycle Condition: Used, fully functional Find more here - / Contact us at -

feed pressure: 11 barPower: 11 KWReceiver: 500 LControl: AtlasCopco EL liter capacity: 1,38 m³/mindimensions of the machine ca.: - mweight of the machine ca.: 330 kgThe Atlas Copco GX11FF EL (Full Feature, Extended/Electronic) isan oil-injected screw compressor with a rated power of 11 kW (15hp), designed for continuous industrial use. The ‘Full Feature’version features an integrated refrigeration dryer thatprovides dry compressed air straight from the factory.Delivery volume (FAD): approx. 1,446 l/min for the 10 bar version or approx. 60 CFM. Tank capacity: mounted on a 500 litre tank. Noise level: relatively quiet at approx. 67–69 dB(A) thanks to soundproofing hood.- Integrated dryer (FF): The refrigeration dryer prevents condensation from formingin the pipes and protects downstream tools.- Electronic control: The ‘EL’ models often feature amore advanced control system ...