Prensas hidráulicas (151)

Prensa hidráulica

RETREAT POSSIBLE FROM SEPTEMBER 2026 Auction-ID: A7-50524-900

A prensa hidráulica SMG DS 315-1500/1300 CNC foi fabricada em 1984 na Alemanha. A máquina, constituída por duas estações interligadas, é utilizada para prensar peças metálicas em modo manual, semi-automático e automático com uma força de pressão de até 315 toneladas. Todos os parâmetros de maquinação da máquina são definidos utilizando um controlo CNC com um ecrã tátil a cores. A prensa está equipada com um alimentador de chapas hidráulica e pneumática, aciona servo para os rolos de alimentação para definir um curso muito preciso de até 0,1 mm, gaiolas de segurança e sensores de alimentação e controlo de gotas. A máquina SMG 315 T sofreu uma revisão completa em 2007, durante a qual foram substituídos componentes como bombas e instalações de segurança. Dados técnicos da prensa SMG DS 315-1500/1300 - força máxima de imprensa: 315 t - dimensões ...

Distance between the front columns 2100 mm and distance between the side columns 1100 mm. Additional table size 1820 × 1500 mm. Cylinder diameter 250 mm. Main table size 2600 x 1800 mm. Including REGLOPLAS 300LD temperature controller Auction-ID: A7-50524-927

Força nominal 100 t Curso - 250 mm motor 3 kW mais informações a pedido

• Presumably used for punching pipes.• Passage diameter: approx. 450 mm

Forno 1200 temperatura 10 - 1200 Celsius 2 zonas de aquecimento 100kW porta auto PLC

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-50066-418

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50066-347

CONTROLS  PLC SIEMENS S7-400 PRESS DESIGN  drive system: hydraulic   number of suspensions: 1   slide ejectors / cushion: no   table cushion: no   opening in table: no   feedstock transport direction: back-front PRESS FORCES  total force (nominal): 1000 toPRESS TABLE  table surface (left-right): 2066 mm  table surface (front-back): 2000 mm  height above floor level: 630 mmSLIDE  stroke: 900 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 600 mm/s  working velocity min.: 15 mm/s  working velocity max.: 40 mm/s  return velocity max.: 390 mm/s  return force: 100 toTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1710 mm  distance table - slide max.: 1700 mmELECTRICAL SPECIFICATIONS  total power consumption: 160 kW  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  height above floor level: 6500 mm  t ...

CONTROLS  PLC SIEMENS S7 300 PRESS DESIGN  drive system: hydraulic PRESS FORCES  total force (nominal): 800 toPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 2000 mm  height above floor level: 700 mmSLIDE  table surface (left-right): 2000 mm  table surface (front-back): 2000 mm  stroke: 900 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 400 mm/s  working velocity min.: 5 mm/s  working velocity max.: 160 mm/s  return velocity max.: 300 mm/sTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1700 mm  distance between columns (H-frame): 2100 mmELECTRICAL SPECIFICATIONS  total power consumption: 370 kW  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 81000 kgATTACHMENTS (PRESSES)  press automation: yes   gripper transfer system: yes   acc. to actual acci ...

CONTROLS  conventional PRESS FORCES  total force (nominal): 160 toPRESS TABLE  table surface (left-right): 1000 mm  table surface (front-back): 850 mmSLIDE  stroke: 705 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1205 mmMachine hours: 78571

Factory Number 056-005/1Machine Type Hydraulic Single-Column PressPress Force 1,600 kN / approx. 160 tTable Size 900 × 630 mmRam Surface 750 × 450 mmMax. Installation Height / Opening 800 mmMin. Opening 300 mmRam Stroke 500 mmHydraulic Pressure 160 barConnected Load 11 kWConnection Voltage 400 V / 50 HzControl Voltage AC 230 VRated Current 24 ASupply Line Fuse 50 ACE Marking

Hydraulic single-column press with 25 t pressing force and 4 kW drive power. Machines are generally offered without documentation. If documents are available, they will be attached to the respective machine.

Auction-ID: A1-50750-437

CONTROLS  PLC SIEMENS SIMATIC OP 27 PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1000 mmSLIDE  stroke: 600 mmSLIDE (HYDR. PRESS)  return force: 38 toDIE CUSHION (TABLE CUSHION)  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS  total weight approx.: 43000 kg

Press force: 16,000 kNMax. ram stroke: 1,700 mmMax. opening between table and ram: approx. 2,450 mmMin. opening: 770 mmRam plate: 4,500 × 2,500 mmTable size: 4,500 × 2,500 mmRapid traverse: 350 mm/sWorking speed at 66% press force: 23 mm/sWorking speed at 100% press force: 13 mm/sMax. return speed: 220 mm/sMax. retraction force: 1,600 kNRam cushion:Force: 2,000 kNStroke: 150 mmPressure plate: 3,650 × 1,580 mmTable cushion:Force: 2 × 1,000 kN or 3 × 500 kNStroke: 300 mmPressure plate: 1,550 × 700 mmDrive:Main motors: 2 × 132 kWMotor filter unit: 4 kWMotor speed: 1,500 rpmSuitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces.

EXNER EXSBRD 500ET Hydraulic PressGeneral DataManufacturer: Maschinenfabrik EXNER GmbH & Co. KGType: EXSBRD 500ETYear of Manufacture: 2001Machine No.: 10461Technical DataPress Force: 5,000 kN / 500 tMax. Stroke Length: 1,300 mmMax. Opening: 1,800 mmMin. Opening: 500 mmTable Size: 2,550 × 2,000 mmColumn Clearance: 2,570 mmTool DataMax. Tool Dimensions: 2,200 × 1,800 mmMax. Tool Weight: 25,000 kgSpeedsWorking Speed: 26 / 50 mm/sRapid Traverse Speed: 400 mm/sAdditional Technical DataOverrun Distance: 97 mmOverrun Time: 158 msSafety Distance: 252 mmDrive Power: 159 kWOil Capacity: approx. 2,800 l

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: hydraulic PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 2200 mm  table surface (front-back): 1700 mmSLIDE  stroke: 1600 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1600 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 6536 mm  space requirements -front/back-: 2923 mm  total height: 6135 mm  total weight approx.: 36000 kg

pressure: 6 tdistance between columns: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1 x 1 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tthroat: 360 mmtable-size: 1.250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tPress force: 250 tThroat depth: 360 mmTable size: 1,250 × 630 mmTable opening diameter: 250 mmRam clamping surface: 850 × 450 mmInstallation height (daylight): 800 mmRam stroke: up to 500 mmMain cylinder diameter: 400 / 360 mmRam speed (downward): 200 mm/sRam speed (upward): 110 mm/sTotal power requirement: 20.5 kWMachine weight: approx. 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tthroat: 360 mmtable-size: 1.250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tPress force: 250 tThroat depth: 360 mmTable size: 1,250 × 630 mmTable opening diameter: 250 mmRam clamping surface: 850 × 450 mmInstallation height (daylight): 800 mmRam stroke: up to 500 mmMain cylinder diameter: 400 / 360 mmRam speed (downward): 200 mm/sRam speed (upward): 110 mm/sTotal power requirement: 20.5 kWMachine weight: approx. 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2 tdistance between columns: - mmstroke: ? mmthroat: ? mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mhydraulic press 2tDrive: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tstroke: 500 mmtotal power requirement: 20,5 kWweight of the machine ca.: 7,5 tRated force: 160 Mp (˜ 1600 kN / 160 tons)Operating pressure: 144 kp/cm²Speed:Downward: 200 mm/sUpward: 250 mm/sRam stroke: 500 mmThroat depth: 360 mmMax. distance (table to ram): 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tdistance between columns: 550 mmstroke: 150 mmtotal power requirement: 11 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 3 y 3 x 2,5 mNo. 4105Hydraulic pressCompressive force max. 600 kNRam stroke 150 mmWeight approx. 4500 kgTable 500 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tdistance between columns: 360 mmstroke: 400 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1.8x1.6x2.7 mwww.marcels-maschinen.chThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  conventional PRESS FORCES  total force (nominal): 800 toSafety distance 141 mm, maximum overrun 39 mm, rapid lowering speed 400 mm/s

CONTROLS  electronic controls PRESS DESIGN  drive system: hydraulic   frame design: 4 column   number of suspensions: 1   slide ejectors / cushion: yes   table cushion: yes PRESS FORCES  total force (nominal): 200 toPRESS TABLE  table surface (left-right): 1330 mm  table surface (front-back): 1150 mm  height above floor level: 850 mm  opening in bed (diameter): 250 mmSLIDE  slide force: 200 to  table surface (left-right): 1200 mm  table surface (front-back): 1200 mm  stroke: 800 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 300 mm/s  working velocity min.: 30 mm/s  return velocity max.: 400 mm/s  return force: 200 toSLIDE EJECTOR / CUSHION  working principle: hydraulical   nominal force: 30 to  stroke: 130 mmDIE CUSHION (TABLE CUSHION)  cushion force: 30 to  stroke: 850 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains freq ...

PRESS FORCES  total force (nominal): 1000 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1300 mmSLIDE  stroke: 500 mm

CONTROLS  PLC SIEMENS SIMATIC OP 27 PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1000 mmSLIDE  stroke: 600 mmSLIDE (HYDR. PRESS)  return force: 38 toDIE CUSHION (TABLE CUSHION)  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS  total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 46131

CONTROLS  PLC SIEMENS SIMATIC OP 27 PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1000 mmSLIDE  stroke: 600 mmSLIDE (HYDR. PRESS)  return force: 38 toDIE CUSHION (TABLE CUSHION)  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS  total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 32510

CONTROLS  PLC SIEMENS SIMATIC OP 27 PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1000 mmSLIDE  stroke: 600 mmSLIDE (HYDR. PRESS)  return force: 38 toSLIDE EJECTOR / CUSHION  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS  total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 47037

CONTROLS  PLC SIEMENS SIMATIC PANEL PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 400 toPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1300 mmSLIDE  stroke: 700 mmDIE CUSHION (TABLE CUSHION)  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1100 mmMachine hours: 14060

pressure: 150 tstroke: mmdistance between table / ram: 660 mmtable surface area: 1500 x 610 mmtable height over floor: mmdiameter of seal: 150 mmrange L-W-H: 1,7 x 1,5 x 2,3 mweight of the machine ca.: tC-frame press- hole in table Ø 120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided   table cushion: yes   opening in table: yes PRESS FORCES  total force (nominal): 100 toPRESS TABLE  table surface (left-right): 710 mm  table surface (front-back): 560 mmSLIDE  slide force: 100 to  table surface (left-right): 560 mm  table surface (front-back): 450 mm  spigot hole diameter: 50 mm  stroke: 320 mm  thickness of bolster plate: 150 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 340 mm/s  working velocity max.: 32 mm/s  return velocity max.: 330 mm/sSLIDE EJECTOR / CUSHION  nominal force: 2 to  stroke: 40 mmDIE CUSHION (TABLE CUSHION)  cushion force: 10 to  stroke: 80 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 455 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 300 mm  sheet thickness max.: 20 mm  spee ...

CONTROLS  PLC SIEMENS S5 95U PRESS DESIGN  drive system: hydraulic   openings in uprights: yes PRESS FORCES  total force (nominal): 350 toPRESS TABLE  table surface (left-right): 1600 mm  table surface (front-back): 1400 mmSLIDE  stroke: 1200 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 250 mm/s  working velocity min.: 14 mm/s  working velocity max.: 50 mm/sTOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 1250 mm  distance between columns (H-frame): 1650 mm  passline opening (free passage in side columns): 630 mmELECTRICAL SPECIFICATIONS  total power consumption: 60 kWDIMENSIONS / WEIGHTS  height above floor level: 4300 mm  height under floor level: 1000 mm  total weight approx.: 24000 kgATTACHMENTS (PRESSES)  European CE standards: yes

CONTROLS  PLC SIEMENS S5 95U PRESS DESIGN  drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES  total force (nominal): 650 toPRESS TABLE  table surface (left-right): 3000 mm  table surface (front-back): 1800 mmSLIDE  slide force: 630 to  table surface (left-right): 3000 mm  table surface (front-back): 1800 mm  stroke: 1000 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 7 mm/s  working velocity max.: 15 mm/s  return velocity max.: 120 mm/s  return force: 65 toDIE CUSHION (TABLE CUSHION)  cushion force: 250 to  stroke: 400 mm  cushion plate surface (left-right): 2500 mm  cushion plate surface (front-back): 1450 mm  working principle: hydraulical TOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 1250 mm   ...

pressure: 630 tdiameter: 320 mmstroke: 310 mmtotal power requirement: kWweight of the machine ca.: 3500 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  PLC SIEMENS S7 300 PRESS DESIGN  drive system: hydraulic PRESS FORCES  total force (nominal): 800 toPRESS TABLE  table surface (left-right): 2600 mm  table surface (front-back): 2000 mm  height above floor level: 540 mmSLIDE  stroke: 900 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 460 mm/s  working velocity min.: 25 mm/s  working velocity max.: 44 mm/s  return velocity max.: 460 mm/sTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1700 mmELECTRICAL SPECIFICATIONS  total power consumption: 180 kWDIMENSIONS / WEIGHTS  total weight approx.: 95000 kgATTACHMENTS (PRESSES)  press automation: yes   gripper transfer system: yes   acc. to actual accident protection regulation: yes   European CE standards: yes Complete hot forming line consisting of: Hydraulic press NEFF 800 to. Ruhstrat furnace system:- Natural gas heat ...

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES  total force (nominal): 12 toSLIDE  stroke: 200 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 1000 kgHour counter: 30181 hlast safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm

pressão: 250 tdistância entre colunas: 0 mmcurso: 0 mmnecessidade de potência total: 0 kWpeso da máquina ca.: 0 t dimensões da máquina ca.: 0 m

pressão: 63 tdistância entre colunas: 0 mmstroke: 160 mmse de superfície: 630 x 500 mmdayligth: 400 mmtotal power requirement: kWpeso da máquina ca.: 5 tdimensionais da máquina ca.m