prensas usadas para venda (1,738)

pressure: 90.0 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 135 mmdayligth: 180 mmthroat: 350 mmworking feed: 8.0 mm/secreturn speed: 68.0 mm/secwork height max.: 805 mmback stop - adjustable: max. 620 mmControl: ENC 310 oil volume: 100 ltotal power requirement: 7.5 kWweight: 5840 kgrange L-W-H: 4000 x 2040 x 2450 mm from a maintenance workshop very good conditions ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=PIiHc2e7h28Features: - NC electro-hydraulic press brake- with DURMA NC control ENC 310 Illuminated LCD display X-axis control & value display Y-axis control & value display- Swiveling operator panel, front left- NC controlled axes: Y1/Y2 + X- NC electro-motorized backgauge (X-axis) with 2x manually adjustable backgauge fingers including lateral and height adjustment (Z+R axes)- NC electro-motorized depth adjustment (Y-a ...

pressure: 40 tthroat: 220 mmstroke: 8-88 mmstroke - stepless adjustable: 30-140 mmram adjustment: 63 mmweight of the machine ca.: 2600 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

distance between columns: 300 mmtable length: 3550 mmtable width: 190 mmtable height: 800 mmdistance between columns: 3230 mmcolumn arm: 300 mmweight of the machine ca.: 12,5 tdimensions of the machine ca.: 1600 x 3800 x 2800 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tstroke: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: 2.000 x 1.200 x 2.800 mmControl: Producer: HIDROLIKSANYOM: newType: HD 160Thrust: 160 ton.Stroke: 400 mmThroat depth: 480 mmTotal power requirement: 5,5 kWDistance between frames: 1.200 mmCylinder-Ø: 120 mmDimensions (LxWxH): 1.800 x 1.000 x 2.550 mmWeight: 1.400 kgAdditional information:• solid, welded construction• pressure cylinder lateral adjustable• operating electrical per switch lever /• pressure indication per Manometer• material support per cylinder, adjustable in height• CE-markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 450 mmmax. module: 4 mminternal dia. - min.: 100 mminternal dia. - max.: 300 mmMaximum permissible peeling wheel diameter: 175 mmDiameter of the installation area: 125 mmslide travel X-axis: 350 mmslide travel Z-axis: 300 mmslide travel Z-axis: 440 mmLargest swivel range of the peeling head: ±25 Gradworkpiece table outer diameter: 570 mmWorkpiece table – Maximum permissible load: 5 kNFeed - X: 12000 mm/minFeed - Y: 5000 mm/minFeed - Z: 8570 mm/minTools speed: 0-3000 U/minWorkpiece table speed: 0-1500 U/minvoltage: 400 VControl: weight of the machine ca.: 11 tdimensions of the machine ca.: 5,85 x 8,3 x 3,8 mTechnical specifications: - CNC Siemens 840 sl - Swivel grab travel: 180 degrees Fluids: - Hydraulic: 150 l - Coolant: 850 l - Engine and hydraulic cooling: 100 l - Grease lubrication: 2 kg The data for this ad was create ...

pressure: 25 tno. of strokes: - Hub/minsheet width: - mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The SAFAN H-Brake 120-3100 TS1 is a robust hydraulic press brake designed for consistent accuracy, high uptime and fast changeovers. With 120 tons of pressing force and 3100 mm bending length, this model delivers reliable performance for demanding production environments. As a used SAFAN H-Brake 120-3100 TS1 from 2005, this second hand machine combines proven SAFAN build quality with smart options that keep your shop productive.What this means for you- Capacity and flexibility. 120 T pressing force and 3100 mm bending length handle a wide range of parts in steel, stainless and aluminum.- Accuracy across the full length. Wila CNC Crowning and a throat depth of 400 mm help maintain consistent angles and reduce rework.- Fast setup. Wila New Standard hydraulic tool clamping speeds up tool changes and shortens lead times.- Controlled precision. Independent Y1 and Y2 with X, Z1, Z2 and central ...

pressure: 3,3 bei 6bar tdayligth: 250 mmstroke: 70 mmwork stroke: 10 mmtable surface area: 220x190 mmthroat: 150 mmweight of the machine ca.: 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 250 mmstroke: 400 mmtable surface area: 600x480 mmram surface: Ø135 mmtable height: 980 mmweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: 300 mmstroke: 8-110 mmno. of strokes: 100 Hub/minram - range of adjustment: 75 mmtable surface area: 750x590 mmram surface: 540x400 mmhole in the table: 200x200 mmtable height: 780 mmtool hole in ram: Ø 40 mmtotal power requirement: 11 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 1200x1700x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

pressure: 135 tchamfer lenght: 2550 mmdistance between columns: 2050 mmcontrol: CYBELEC ModEva 10 S total power requirement: 25 kWweight of the machine ca.: 11.000 kgdimensions of the machine ca.: mMachine:- Sturdy machine frame constructed as a fully welded all-steel structure- Pressure beam with high bending strength- Electrohydraulic top drive via proportional valves- Modern block hydraulic systemOptional equipment:- Increase in installation height and stroke by 150 mm each- Backgauge system 2 - 2 axes, R-axis adjustment 150 mm- 2 x additional stop fingers 2/4-axes, however, offset by 20 mm- CNC holding device- Distance from the bending line to the holding device approx. 240 mm- EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering- EHT lower tool clamping, mounting width 55 mm, pneumatic- Hardened insert strip for EHT lower tool clam ...

pressure: 28 tpiston stroke: 180 mmdiameter of piston: 130 mmtable-size: 300 x 550 mmworking feed: 2 - 9,8 mm/sekreturn speed: 20 mm/secMax. pressure: 200 barbending capacity - flat iron: 200 x 10 mmweight of the machine ca.: 800 kgdimensions: ca. 1150 x 1103 x 750 mmThe horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles.With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold ...

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

pressure: 200 tnominal power: 2000 kNstroke length max.: 1700 mmworking feed: 50 mm/secweight of tools max.: 50000 kgvoltage: 400 Vtable-size: 4.800 x 2.400 mmtotal power requirement: 99 kWweight of the machine ca.: 113 tdimensions of the machine ca.: mpassage width: mmstroke: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tstroke: mmdistance between table / ram: 660 mmtable surface area: 1500 x 610 mmtable height over floor: mmdiameter of seal: 150 mmrange L-W-H: 1,7 x 1,5 x 2,3 mweight of the machine ca.: tC-frame press- hole in table Ø 120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton