prensas usadas para venda (1,713)

pressure: 40 tdistance between columns: 495 mmstroke: 150 mmdistance table/ram, max. stroke up, adjustment up: 300 mmtable surface area: 490 x 400 mmhole in the table: 50 mmtable height over floor: 950 mmcolumn travel -side: 155 mmram surface: 150 mmfeed down: 480 mm/secfeed up: 480 mm/secworking feed: 20 mm/secoil volume: 115 lpower capacity: 7,5 kWweight: 2,2 tdimensions of the machine ca.: 1,35 x 1,00 x 2,21 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: 280 mmstroke: 8 - 112 mmno. of strokes: 30 - 120 Hub/mindistance table/ram, max. stroke up, adjustment up: 500 mmtable surface area: 840 x 580 mmhole in the table: 150 mmtable height over floor: 910 mmpassage to the back: 640 mmram surface: 560 x 300 mmram adjustment: 80 mmpower capacity: 7,5 kWtotal power requirement: kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 1,4 x 2,3 x 3,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 200 mmstroke: 8 - 80 mmno. of strokes: 180 Hub/mindistance table/ram: 330 mmtable surface area: 550 x 400 mmhole in the table: 60 mmtable height over floor: 800 mmtable height over floor: 800 mmpassage to the back: 200 mmram surface: 355 x 220 mmram adjustment: 50 mmpower capacity: 2,5 kWtotal power requirement: kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1,2 x 1,8 x 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 16 mmpre-bending: / weight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tno. of strokes: 55 Hub/minstroke: 20 - 160 mmtable-size: 970 x 660 mmmax. ram stroke: 160 mmmin. ram stroke: 20 mmthroat: 340 mmtotal power requirement: 11 kWweight of the machine ca.: tdimensions of the machine ca.: 1,5 x 3,0 x mWith motor, gear reduction, wheel protection, air friction clutch, additional brake(Make Desch) and safe control according to UVV,Mech. Overload protection in the ramTwo-hand operation, control cabinetThe price is ex stock as the press is, is, or is.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 280 mmstroke: 8 - 100 mmno. of strokes: 65 Hub/minram adjustment: 63 mmtable surface area: 620 x 500 mmdistance table/ram, max. stroke up, adjustment up: 415 mmhole in the table: 230 mmtable height over floor: 800 mmram surface: 310 x 255 mmpower capacity: 5,5 kWtotal power requirement: kWweight of the machine ca.: 3,95 tdimensions of the machine ca.: 1,20 x 1,80 x 2,40 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qtd. 1 Linha de prensa de extrusão de alumínio em segunda mão Código Alumínio HE9 6063 Mfc.: Fabricante indiano Construído em: 1978 PLC hidráulico – modernização feita no ano de 2005! Força total de prensagem: 680 MT, 750 UST Pressão de extrusão: 210 bar Diâmetro do tarugo: 5", 121 mm Peso por polegada de boleto: 0,76 kg/inch Âmbito de fornecimento: Forno de aquecimento de toros Prensa de extrusão de cisalhamento a quente Extrator suspenso Sistema de arrefecimento debaixo da cama Cama de arrefecimento Run-out Transportador de correia Máquina de corte de maca Forno de matriz Transportador de mesa transportadora para embalagem final

plate width: 3200 mmplate thickness: 83 mmpre-bending: 72 mmroll diam. toproll: 700 mmroll diam. bottom roll: 650 mmside roll diameter: 550 mmdistance between columns: 3300 mmroll drive: 93,2 kWturning speeds: 2 - 4 m/mintotal power requirement: - kWweight of the machine ca.: 78 tdimensions of the machine ca.: 9 x 3,3 x 3,4 m4 –Roll Bending Machine- 4 roll Pinch bending- Pre-bending- Tilting function-- Hydraulic front bearing tilting speed: 450mm/min-- Hydraulic tilting of top roll: 250mm/min- CE2 Units availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tdistance between columns: 600 mmstroke: 600 mmtable-size: 3000 x 1500 mmtravel x / y: 2200 x 900 mmworking feed: 7 mm/sectank capacity: 66 lworking pressure: 30-250 bartotal power requirement: 18,5 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3500 x 3500 x 3700 m2. STANDARD EQUIPMENTFRAME- Welded steel frame- Frame and plates are precision-milled using a CNC milling machine- Chrome-plated cylinder- Worktop with threaded holesHYDRAULICS- Bosch Rexroth hydraulic pump- Hydrapack or Badestons hydraulic directional control valve- Hydraulic block in accordance with EN standards- 1000-liter hydraulic oil tank- Pressure adjustment via pressure transmitter/regulatorELECTRICS- Control cabinet in accordance with EN standards- All cables are labeled and clearly arranged- All electrical components are from SiemensCONTROL PANEL- Stroke control in any position- X, Y, a ...

An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible.

pressure: 130 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmControl: Cybelec weight of the machine ca.: 11.600 kgdimensions of the machine ca.: 4000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 3200 mmControl: CYBELEC CybTouch 15 PS weight of the machine ca.: 14.000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PARA VENDA: BRUDERER BSTA 50USL Prensa de estampagem de alta velocidade Com alimentador automático de tiras BBV 190 500 kN | 100–1120 SPM | Totalmente automático | Qualidade suíça de primeira linha Destaques técnicos: Força nominal: 500 kN Taxa de curso: 100–1120 golpes por minuto Carga horária: 41000 h Motor principal: 22 kW Tensão de controle: 24V DC Conexão de alimentação: 400V / 50Hz / 62 kVA Curso ajustável: 16 / 19 / 25 / 32 / 38 /44 / 51 mm Ajuste de altura de fechamento: 64 mm Dimensões de trabalho: Largura máxima de instalação da ferramenta: 1100 mm Largura de passagem da tira: até 256 mm Área do carneiro: 980 × 420 mm Área da mesa: 1080 × 650 mm Altura de entrada da tira ajustável: 60–140 mm Max largura da tira: 120 mm Passo de alimentação máximo: 85 mm Espessura máxima do material: 4 mm Ângulo de alimentação: 180 graus  ...

A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible.

pressão: - tgarganta: - mmcurso: - mmrequisito de potência total: - kWpeso da máquina ca.: - tdimensões da máquina ca.: - m

pressão: 100 tgarganta: - mmcurso: 8 - 116 mmpotência total necessária: 8 kWpeso da máquina ca.: 7,5 tdimensões da máquina ca.: ca. 2,5 x 2,5 x 3,5 mNo. 0778Prensa excêntrica de coluna única 1000 kNAjuste de curso 8-116 mm, taxa de curso 65/min, ajuste de carneiro 80mm, requisito de espaço2.1x 1.7 x 3.1 m, Peso aprox. 7500 kgSuporte inclinável, 20/10/30Área de trabalho: mesa 800 x 560Movimentação: 8 kW

pressão: 25 tgarganta: - mmcurso: - mmrequisito de potência total: - kWpeso da máquina ca.: 3 tdimensões da máquina ca.: 2 x 2 x 2,4 m

pressão: 6 tdistância entre colunas: - mmcurso: - mmpotência total requisito: - kWpeso da máquina ca.: 1 tdimensões da máquina ca.: 1 x 1 x 2 m

pressure: 100 tstroke: 380 mmtable surface area: Arbeitsbreite 1100 mmpressure: 258 baroil volume: 46 dm³ajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 970 kgInner diameter of the cylinder [mm]: 220Piston rod diameter [mm]: 90Diameter piston crown [mm]: 120- Movable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision workThe 100 ton hydraulic press is equipped with a movable cylinder (left-right) and a height-adjustable work table. Over and beyondit has a pressure regulation, 2 speeds, a joystick anda hand pump for precision pressing.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 ttable length: 670 mmtable width: 570 mmtotal power requirement: 8 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 2 x 2 x 3 mNo. 2886Spotting press 200 kNRICE TUS 60 OK 20Stroke approx. 700Drive: 7,5 kWHydraulic controlExtendable table 670 x 570 mm,Swivel-out top plate 670 x 570 mm,Installation height 740 mmClearance between the columns 620 mm,Space requirement L/W/H 1870 x 1620 x 3000 mm,Weight approx. 3.5 to.Asking price: 8.500,-- ex works / EXWAsking price: 12.900,-- EXW warehouse loaded free on suitable truckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tstroke: 380 mmtable surface area: Arbeitsbreite 750 mmpressure: 259 baroil volume: 38 dm³ajustment speed: 2,87 mm/secwork speed: 9,5 mm/secreturn speed: 12 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 540 kgInner diameter of the cylinder [mm]: 170Piston rod diameter [mm]: 75Diameter piston crown [mm]: 100- Integrated pressure gauge- Pressure regulator- Hydraulic unit with 2 speeds- Working table adjustable in height- Joystick to move the piston up / downThe 60 ton workshop press has a fixed cylinder and aheight-adjustable work table (motorized). Equipped withPressure regulation, manometer, 2 speeds and a joystick for themove the piston up and down. With this joystick you can use the piston preciselymove, making this hydraulic press perfect for precision jobssuitable.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 20 tdistância entre colunas: 220 mmcurso: 50 mmnecessidade de potência total: 0 kWpeso da máquina ca.: 0,17 tdimensões da máquina ca.: 0,4 x 0,5 x 1 m

pressão: 60 tdistância entre colunas: 550 mmcurso: 150 mmnecessidade de potência total: 11 kWpeso da máquina ca.: 5 tdimensões da máquina ca.: 3 y 3 x 2,5 mNo. 4105Prensahidráulica Força de compressão máx. 600 kNCurso de RAM 150 mmPeso aprox. 4500 kgTabela 500 x 400 mm

pressure: 63 tdistance between columns: 680 mmstroke: 150 mmtotal power requirement: 15 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 3 x 3 x 3 mNo. 0214ydraulic high-speed double-column press SMG DS 63Clearance between the uprights 680 mm,max. distance between table top and ram 385 mm,Ejector force 15kN, largest ram stroke 150 mm.Working area: Table surface 660 x 460Drive: 15 kW pressing force 630 kN, retraction force 51 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tstroke: 400 mmtable surface area: Arbeitsbreite 1300 mmpressure: 243 baroil volume: 64 dm³ajustment speed: 5,73 mm/secwork speed: 1,84 mm/secreturn speed: 7,08 mm/sectotal power requirement: 3,0 kWweight of the machine ca.: 1690 kgInner diameter of the cylinder [mm]: 320Piston rod diameter [mm]: 140Diameter piston crown [mm]: 175- adjustable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision work- with digital displayThis 200 ton hydraulic press is equipped with a movable cylinder (left-right), a height-adjustable work table, a pressure regulator, 2speeds, a joystick and a hand pump for precision pressingfitted.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tstroke: 350 mmtable surface area: Arbeitsbreite 750 x 260 mmpressure: 221 baroil volume: 37 dm³work speed: max. 9,8 mm/secreturn speed: 14 mm/sectotal power requirement: 3 kWweight of the machine ca.: 385 kgInner diameter of the cylinder [mm]: 130Piston rod diameter [mm]: 55Diameter piston head [mm]: 80- Integrated pressure gauge- Pressure regulator- Hydraulic unit with variable speeds- Working table adjustable in height- Joystick to control piston and speedThe workshop press (30T) has a fixed cylinder and a highadjustable work table (motorized). Equipped with pressure regulation,Pressure gauge, variable speed and a joystick to move the piston up and downto move off. With this joystick you can also control the speedadjust, making this motorized hydraulic press perfect forprecision work is suitable.The data for this ad was created with ModulMWS - the software solution of Lo ...

pressure: 40 ttable length: 1280 mmtable width: 900 mmtotal power requirement: 7 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 3 x 2 x 3,6 m mNo. 5282Spotting press 400 kNREIS TUS 90 OK 40Working area: table 900 x 1280Column passage 930 x 705 mmTable top 900 x 1280 mmram plate 900 x 1200 mmInstallation height 1035 mmSpace requirement approx. 3 x 2 x 3.6 mTransport dimensions approx. 4 loading meters, width 2.20 / height 2.80Weight approx. 8 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6,2 tchamfer lenght: 285 mm mmdistance between columns: 230 mmdayligth: 215 mmthroat: 70 mmstroke: 100 mmworking feed: 9,8 mm/secreturn speed: 50 mm/secquantity of oil: 10 lControl: DELEM DA 41T total power requirement: 0,7 kWweight of the machine ca.: 250 kgdimensions: 900 x 1300 x 550 mm• Basic version as a C-frame• Compact table model• Ideal for prototypes and small series• Very short setup time• Functionally simple• Wide range of applications• Low noise level• Low energy consumption• Easy handlingincluding special equipment:- CNC control DELEM DA 41TThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tTable dimensions: 1000 x 360 mmvoltage: 400 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mInclineable mechanical press withupdated electrics (CE2004) andbolster plates.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2,5 kNstroke: 45 mmthroat: 90 mmWorking height from to: 80 - 220 mmtable surface area: 120 x 60 mmweight of the machine ca.: 22 Kgdimensions: 160 x 230 x 390 mmHand presses with rack HZ 250The power is transmitted via a rack and pinion construction. she findstheir use where during the working process a constant pressureis needed.Precisely manufactured, spindle hardened and ground, unlimited service lifeLong spindle guide, optimal pressure performance,T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.