prensas usadas para venda (1,810)

pressure: 60 tthroat: 280 mmstroke: 10-140 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 740x560 mmram surface: 380x195 mmhole in the table: 300x200 mmtable height: 760 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 tthroat: 220 mmstroke: 8-96 mmno. of strokes: 120 Hub/minram - range of adjustment: 50 mmtable surface area: 580x440 mmram surface: 305x170 mmhole in the table: 215x175 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 45 tthroat: 230 mmstroke: 4-80 mmno. of strokes: 120 Hub/minram - range of adjustment: 55 mmtable surface area: 695x455 mmram surface: 365x180 mmhole in the table: 220x180 mmtable height: 890 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 300 mmstroke: 10-140 mmno. of strokes: 60 Hub/minram - range of adjustment: 60 mmtable surface area: 800x500 mmram surface: 430x230 mmhole in the table: Ø150 mmtable height: 860 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.

Pressione Tox com 4 colunas MAg 008288A001 BJ 2016

pressure capacity max.: 80 tStroke: 500 mmtable surface area: 960 x 810 mmspindle pitch: 72 daylight between the columns: 950 / 540 mmpassage: 640 mmmachine weight ab.: 4500 kgdimensions of the machine ca.: 2,0 x 2,0 x 3,85 mHydraulic quick adjustment 500mmFlywheel Ø2000mm4 prism bases for straightening wavesdifferent support framesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oferta 25200 Especificações: - Capacidade de pressão 200 t - Largura de trabalho 3100 mm - Passagem entre os verticais 2600 mm - Largura da mesa 180 mm - Projeção 300 mm - Altura de instalação 450 mm - Velocidade de alimentação 80 mm/seg. - Velocidade de trabalho 9 mm/seg. - Velocidade de retração 60 mm/seg. - Curso de carneiro 120 mm - Faixa de ajuste fixo para 120 mm - Acionamento 400 V / 18,7 kW - Necessidade de espaço aprox. L 3300 x A 2950 x P 1900 mm - Peso aprox. 10500 quilogramas - com: - Ajuste da profundidade de cravação + pressão de enfardamento -Mot. Calibre traseiro com ajuste fino do volante - 4-fold universal die - ferramenta de afiação - Painel de controle de duas mãos, interruptor de pé,

Oferta 25227 Especificações: - Capacidade de pressão 150 t - Largura de trabalho 3600 mm - Passagem entre os verticais 3150 mm - Largura da mesa 180 mm - Projeção 250 mm - Altura de instalação 325 mm - Velocidade de alimentação 70 mm/seg. - Velocidade de trabalho 7 mm/seg. - Velocidade de retração 60 mm/seg. - Curso de carneiro 120 mm - Faixa de ajuste fixo para 120 mm - Potência do motor aprox. 7,5 kW - Enchimento de óleo aprox. 300 litros - Necessidade de espaço aprox. L 3850 x A 2300 x P 1600 mm - Peso aprox. 8700 quilogramas - com: - Braço giratório – painel de controle com controle ATL 550 - Para profundidade de cravação + backgauge -Mot. Backgauge - Dispositivo de coroamento - Lasersafe FIESSLER - Matriz universal de 4 vezes, ferramenta de afiação dividida + ferramenta de pé ...

punching pressure: ca. 3,2 tair pressure: 8 barstroke: max. 20 mmdistance between columns: ca. 250 x 200 mmweight of the machine ca.: 52 kgincl. various tools, see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure power: 6-8 barAir consumption: 8 l/Hubheight of stroke: 12 mm: 134 mmno. of strokes: 400 Hub/minpunching force max.: 3500 kpweight of the machine ca.: 80 kgSchüco pneumatic press for Schüco punching toolsArt. No. Schüco: 290 124manual includedvarious pressing tools included!tool nr. 283073, 280162,299259,283492, 283072, 282867, 282644, 282663, 282868, 283071, 2830722 quick-release levers for secure and quick fastening of the press toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qtd. 1 Linha de prensa de extrusão de alumínio em segunda mão Código Alumínio HE9 6063 Mfc.: Fabricante indiano Construído em: 1978 PLC hidráulico – modernização feita no ano de 2005! Força total de prensagem: 680 MT, 750 UST Pressão de extrusão: 210 bar Diâmetro do tarugo: 5", 121 mm Peso por polegada de boleto: 0,76 kg/inch Âmbito de fornecimento: Forno de aquecimento de toros Prensa de extrusão de cisalhamento a quente Extrator suspenso Sistema de arrefecimento debaixo da cama Cama de arrefecimento Run-out Transportador de correia Máquina de corte de maca Forno de matriz Transportador de mesa transportadora para embalagem final

plate width: 3200 mmplate thickness: 83 mmpre-bending: 72 mmroll diam. toproll: 700 mmroll diam. bottom roll: 650 mmside roll diameter: 550 mmdistance between columns: 3300 mmroll drive: 93,2 kWturning speeds: 2 - 4 m/mintotal power requirement: - kWweight of the machine ca.: 78 tdimensions of the machine ca.: 9 x 3,3 x 3,4 m4 –Roll Bending Machine- 4 roll Pinch bending- Pre-bending- Tilting function-- Hydraulic front bearing tilting speed: 450mm/min-- Hydraulic tilting of top roll: 250mm/min- CE2 Units availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tdistance between columns: 600 mmstroke: 600 mmtable-size: 3000 x 1500 mmtravel x / y: 2200 x 900 mmworking feed: 7 mm/sectank capacity: 66 lworking pressure: 30-250 bartotal power requirement: 18,5 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3500 x 3500 x 3700 m2. STANDARD EQUIPMENTFRAME- Welded steel frame- Frame and plates are precision-milled using a CNC milling machine- Chrome-plated cylinder- Worktop with threaded holesHYDRAULICS- Bosch Rexroth hydraulic pump- Hydrapack or Badestons hydraulic directional control valve- Hydraulic block in accordance with EN standards- 1000-liter hydraulic oil tank- Pressure adjustment via pressure transmitter/regulatorELECTRICS- Control cabinet in accordance with EN standards- All cables are labeled and clearly arranged- All electrical components are from SiemensCONTROL PANEL- Stroke control in any position- X, Y, a ...

An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible.

PARA VENDA: BRUDERER BSTA 50USL Prensa de estampagem de alta velocidade Com alimentador automático de tiras BBV 190 500 kN | 100–1120 SPM | Totalmente automático | Qualidade suíça de primeira linha Destaques técnicos: Força nominal: 500 kN Taxa de curso: 100–1120 golpes por minuto Carga horária: 41000 h Motor principal: 22 kW Tensão de controle: 24V DC Conexão de alimentação: 400V / 50Hz / 62 kVA Curso ajustável: 16 / 19 / 25 / 32 / 38 /44 / 51 mm Ajuste de altura de fechamento: 64 mm Dimensões de trabalho: Largura máxima de instalação da ferramenta: 1100 mm Largura de passagem da tira: até 256 mm Área do carneiro: 980 × 420 mm Área da mesa: 1080 × 650 mm Altura de entrada da tira ajustável: 60–140 mm Max largura da tira: 120 mm Passo de alimentação máximo: 85 mm Espessura máxima do material: 4 mm Ângulo de alimentação: 180 graus  ...

A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible.

pressão: - tgarganta: - mmcurso: - mmrequisito de potência total: - kWpeso da máquina ca.: - tdimensões da máquina ca.: - m

pressure: 2,5 kNstroke: 45 mmthroat: 90 mmWorking height from to: 80 - 220 mmtable surface area: 120 x 60 mmweight of the machine ca.: 22 Kgdimensions: 160 x 230 x 390 mmHand presses with rack HZ 250The power is transmitted via a rack and pinion construction. she findstheir use where during the working process a constant pressureis needed.Precisely manufactured, spindle hardened and ground, unlimited service lifeLong spindle guide, optimal pressure performance,T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 kNstroke: 40 mmthroat: 73 mmWorking height from to: 60 - 150 mmtable surface area: 115 x 70 mmweight of the machine ca.: 10 Kg.Toggle lever hand press SPECIAL OFFER!• Working height adjustable by simply loosening the clamping screws on the stand• Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle• Hand lever arranged in a user-friendly manner, return via springThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tdistance between columns: 650 mmstroke: 200 mmtotal power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 500 tlargura de passagem: 750 mmcurso: 120 mmrequisito de potência total: 57 kWpeso da máquina ca.: 16 tdimensões da máquina ca.: m

pressure: 75 tthroat: 280 mmstroke: 303 mmtotal power requirement: 15 kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.

pressure: 8,5 kNstroke: 40 mmthroat: 95 mmWorking height from to: 95 - 240 mmtable surface area: 160 x 110 mmspindle diameter: 25 mmweight of the machine ca.: 27 Kgdimensions: 160 x 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 8,0 kNstroke: 40 mmthroat: 90 mmWorking height from to: 50 - 200 mmtable surface area: 120 x 160 mmweight of the machine ca.: 22 Kgdimensions: 160 x 230 x410 mmKnee lever hand press with fine height adjustment SPECIAL PRICE!• Working height adjustable by simply loosening the clamping screws on the stand• Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle• Hand lever arranged in a user-friendly manner, return via springThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 4,5 kNstroke: 40 mmthroat: 95 mmWorking height from to: 95 - 240 mmtable surface area: 160 x 110 mmspindle diameter: 25 mmweight of the machine ca.: 24 Kgdimensions: 160 x 230 mmDirect-acting pneumatic pressesbring the full pressure performance over the entire stroke length. You will above allused when long-stroke parts are machined with constant forceNeed to become.Convincing technology• Long and precise spindle guide for maximum dimensional accuracy• Hardened and ground piston rod for practically unlimited service life• Double-acting cylinders with end position cushioning on both sides• Double guide rings in the piston, constant and quiet running• Oil resistant sealing elementsSpecial features of the PND series• Spindle secured against twisting• Spindle return on the PND 85/S only via a cylinder chamber additional air savings• Easy, quick and prec ...

Força de compressão: 1000kN/100t, curso do carneiro: 200mm, pressão máxima de funcionamento: 290bar, controle: DNC70, distância de segurança: 166mm, tempo de deslocamento: 104ms, distância de deslocamento: 7mm.

Força de compressão: 2000kN, largura de trabalho: 3100mm, passagem da coluna: 3240mm, curso máximo: 400mm, profundidade da garganta: 250mm, altura máxima de instalação: 965mm, eixos NC: 11, volume hidráulico: 550l, dimensões da máquina X/Y: aprox. 4400mm/3400mm, peso: aprox. 16600kg, controle: Cyb-Tech Infinitron. Documentação disponível. É possível uma inspeção no local.

pressão: 10 tdistância entre colunas: 260 mmdayligth: 210 mmárea da superfície da tabela: 275 x 260 mm