retificadoras usadas para venda (2,511)

grinding wheel diameter: 400 mmno. of working stations: 1 Stücktotal power requirement: 1,7 kWweight of the machine ca.: 0.4 tWith coolant systemMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mmband speed: 33 m/secweight of the machine ca.: 105 kgengine output: 4 kWturning speeds: 2800 U/minAccessories / equipment:- Vibration-free running smoothness- Adjustable working height- S1 motors with 100% duty cycle- Surface and contact grinding possible- Removable protective cover for surface grinding- Connection piece for double suction- Built according to the CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 76980 €: 1454.92 €: 1015 mm: 610 mm: 1.000 x 400 mm: 400 x 1.000 mm: 1050 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 450 mm: 480 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 1.800 1/min: 3.75 kW: 1.5 kW: 1.1 kW: 1.1 kW: 4280 mm: 2080 mm: 2100 mm: 3500 kg: 220 kg: 440 kg: 355 x 50 x 127 mm: 0,001 mm10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment w ...

width of the strips: 100 mmband length: 2000 mmband speed: 15 + 30 m/seltube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 GradDust suction hood: 2 x 75.0 mmmotor speeds:: 1420 / 2660 Upm.face grinding attachment: 400 x 100 mmtotal power requirement: 2.5 / 3.3 kWweight of the machine ca.: 148 kg.range L-W-H: 750 x 1400 x 1200 mmFurnishing :- Constant belt tension through spring-loaded tensioning device- Standard with cylindrical grinding device- for grinding diameters of diam. 20-76 mm- Quick and easy setting of the desired grinding angle- Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt- Large plan grinding surface with protective cover- Slow belt speed (15 m / sec.)- ideal for grinding stainless steel and aluminum- User-friendly tape change, quick and uncomplicated- Quick and easy changing of the grinding rollers without tool ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 197510 €: 3732.94 €: 1010 mm: 590 mm: 1000 x 400 mm: 1000 x 400 mm: 0 -25 m/min: 0 - 4000 mm/min: 0,001 mm: 450 mm: 450 mm: 0 - 3800 mm/min: 0.001 mm: 600 - 3600 1/min: 11 kW: 3675 mm: 4055 mm: 2480 mm: 6500 kg: 423 kg: 670 kg: 405 x 50 x 127 mm: 2,4 / 3,9 kW: 5.9 kW: 0,005 mm: 0,003 mmRigid machine construction with a movable columnfor effective stability to ensure high grinding performance and machining accuracySmart iControlIV control with 15", touchscreen with electronic wired handwheelPC-based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (4 front and 2 rear)All 3 axes with precision ball screws and AC servo mot ...

drill diameter: 40 mmdrilling length: 500 mmlip angle: 160 °clearance angle: 1 - 10 °toolpiece turning speed range: 42 / 28 / 21 U/minfeed range: 0,6-1,2-1,5-3,0 mm/mingrinding wheel dia. x width: 210 x 127 x 50 mmgrinding spindle speed: 3150 U/mintotal power requirement: 3,3 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,0 x 1,0 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 16.0 - 90.0 mmwidth of the strips: 100 mmband length: 1250 mmgrinding band dimension: 100 x 1250 mmtotal power requirement: 2.2 kWweight of the machine ca.: 180 kg.range L-W-H: 1200 x 600 x 1150 mmThe TUGRA TT 90 is a grinding machine forgrinding pipe and profile ends on the front.Equipment:- electro-motor grinding machine for pipe and profile ends- 10x grinding rollers included in delivery incl. storage area - rear of the machine- easy manual clamping/opening of the material- lateral adjustment of the material clamping system- grinding up to 50° degrees possible- machine base- collecting tray for easy emptying of grinding dust- EMERGENCY OFF button at the front- front privacy screen made of plexiglass- side transport bags for easy transportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 77000 €: 1455.3 €: 460 mm: 445 mm: 460 x 200 mm: 450 x 200 mm: 0,1 - 25 m/min: 0 - 3000 mm/min: 0,001 mm: 220 mm: 340 mm: 0 - 3000 mm/min: 0.001 mm: 1000 - 7000 1/min: 3 kW: 0.7 kW: 1.1 kW: 1.1 kW: 2510 mm: 2515 mm: 2010 mm: 1550 kg: 1015 mm: 175 kg: 210 kg: Dm. 205 x 12,7 x 31,75 mm: 0,004 mm: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 4 angular contact ball bearings (P4, checkout 7)Longitudinal guides with double V shape, with Turcite-B coatingTransverse and verti ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2160 €: 75 mm: 75 x 2000 mm: 200 x 75 mm: 530 mm: 3 kW: 35 m/s: 475 - 1240 mm: 1100 mm: 550 mm: 1035 mm: 100 kgIndustrial-belt grinding machinePowerful motorEnclosed grinding head ensure a very effective extraction systemThermal overload protectionEmergency stopElectronic motor brakeAdjustable supportEye protectionStepless adjustable working heightSelf adjusting belt tensionerOperating manual in German or EnglishALTERNATIVEVersion TAS 75X/2 with 2 speeds € 2.530,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mmsanding belt length: 2000 mmband speed: 33 m/secengine output: 3 kWMotor speed: 2800 UpMweight of the machine ca.: 105 kgDomestic equipments:- vibration-free running smoothness- Working height adjustable- S1 motors with 100% duty cycle- Surface and contact grinding is possible- Removable protective cover for surface grinding- Connecting piece for double suction- Built to CE standardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 74030 €: 1399.17 €: 610 mm: 600 mm: 600 x 300 mm: 600 x 300 mm: 420 kg: 700 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 350 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2000 1/min: 5,5 kW: 0.75 kW: 1.1 kW: 1.1 kW: 2710 mm: 2428 mm: 2200 mm: 3500 kg: 975 mm: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatorautom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working areagrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED mach ...

General Description Universal external cylindrical grinding machine manufactured by WMW Glauchau (former East Germany). Designed for precision external cylindrical and tapered grinding of shafts and other rotational workpieces. The machine is equipped for grinding between centres or in a chuck. Technical Details Manufacturer: WMW Glauchau Machine type: Universal external cylindrical grinding machine Year: Not confirmed Grinding wheel diameter: 315 mm Maximum grinding wheel speed: 1,800 rpm 315 mm 3-jaw chuck included Universal workhead Tailstock Hydraulic reciprocating table Grinding wheel guard Coolant system Separate electrical control cabinet Condition Used industrial condition. The machine appears complete with 315 mm three-jaw chuck, workhead, tailstock, grinding wheel, hydraulic table, coolant system and electrical cabinet installed. Normal cosmetic wear and signs of industrial u ...

General Description High-precision coordinate jig boring machine manufactured by SIP-Hauser, model S50-DR. Designed for ultra-precise positioning and boring of holes in tooling, molds, gauges and precision mechanical components. The machine is equipped with a precision coordinate table, rotary table, digital readout and complete coolant system. Technical Details Manufacturer: SIP-Hauser (Switzerland) Model: S50-DR Machine type: Coordinate jig boring machine Year: Not confirmed (electrical documentation dated 1982) Power supply: 380 V, 3-phase, 50 Hz Vertical precision spindle Precision coordinate table Rotary indexing table Digital readout (DRO) Bellows-protected guideways Separate coolant filtration unit Electrical control cabinet Original manuals and electrical documentation included Condition Good industrial used condition. The machine appears complete with rotary table, DRO, coolan ...

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 €: 344.45 €: Dm. 200x78x78 mm: 2800 1/min: 300 mm: 300x150x55 mm: 350x150 mm: 500x160 mm: 3.6 kW: 1020 mm: 820 mm: 2170 mm: 440 kgThis Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it isequippedwith a long column supported by four bearings and is opportunely stiffenedby a sturdy column support.This Surface grinding machine, due to its stiffness and geometrical stability,is highly suitable for grinding with precision pieces of notable height: single or mass-produceddie-shop components, moulds, punches, gears and others.Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motorto the axis,equipping this model of Grinding machine with fixed table,allow preserving perfect work conditions over the years, too.CAST IRON BED to maintain the geometric stability ...

Multi-function portable electric knife sharpener for high-speed steel (HSS) drill bits, chisels, planes, knives and scissors. Rated power: 65 W, Input voltage: 230 V/50 Hz, No-load speed: 6700 rpm, Duty cycle: S3 15% (90 sec on, 510 sec off), Compatible drill bits: 3 x 10 mm, Compatible chisels and blades: 6 x 51 mm, Sharpening disc diameter: 48 mm Auction-ID: A7-49208-107

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-49208-344

This 125mm orbital sander is designed for sanding wood, plaster, metal, and other materials. Its lightweight design allows for one-handed operation. Auction-ID: A7-49208-246

Rotational speed 7500 rpm, Power supply 230 V, Mass 2.0 kg, Plate size 100 mm / 3.2 mm Auction-ID: A7-49208-202

This 125mm orbital sander is designed for sanding wood, plaster, metal, and other materials. Its lightweight design allows for one-handed operation. Auction-ID: A7-49208-46

This 125mm orbital sander is designed for sanding wood, plaster, metal, and other materials. Its lightweight design allows for one-handed operation. Auction-ID: A7-49208-146

Rotational speed 7500 rpm, Power supply 230 V, Mass 2.0 kg, Plate size 100 mm / 3.2 mm Auction-ID: A7-49208-102

General Description Universal tool and cutter grinding machine manufactured by WICKMAN. Designed for sharpening milling cutters, drills, reamers, form tools and other precision cutting tools. The machine features a universal work table and swivelling workhead, allowing a wide range of tool grinding applications. Technical Details Manufacturer: WICKMAN Machine type: Universal tool and cutter grinder Universal swivelling work table Swivelling workhead Grinding wheel spindle head Belt-driven grinding spindle Manual precision controls Suitable for sharpening milling cutters, drills, reamers, form tools and special cutting tools Condition Used industrial condition. The machine appears complete with workhead, universal work table and grinding spindle assembly. Operational status, spindle condition and grinding accuracy have not been tested. Auction-ID: A7-49124-17

Multi-function portable electric knife sharpener for high-speed steel (HSS) drill bits, chisels, planes, knives and scissors. Rated power: 65 W, Input voltage: 230 V/50 Hz, No-load speed: 6700 rpm, Duty cycle: S3 15% (90 sec on, 510 sec off), Compatible drill bits: 3 x 10 mm, Compatible chisels and blades: 6 x 51 mm, Sharpening disc diameter: 48 mm Auction-ID: A7-49208-7

90W Electric Chain Sharpener Designed to be attached to a workbench, table, or wall in your garage or workshop. The working angle is adjustable from 0 to 35 degrees, adapting to different chains and sharpening depth. Equipped with a sharpening speed of 5000 rpm and a powerful 90W motor. The chain clamp fits all types and pitches of chains. Precise sharpening angle adjustment of 35 degrees to the right or left. Compact and mountable on any workbench, wall, vise or table. Auction-ID: A7-49208-211

Machine number: 2356Operating voltage: 400 VFrequency: 50 HzRated current: 125 AConnection: 45 kWControl: SIEMENS SINUMERIKCenter height: 320 mmCenter width: 3000 mmMax. grinding length: 3000 mmGrinding spindle diameter: max. 620 mmGrinding spindle tool holder: 80 mm diameter, taper 1:5Swivel capability: +- 10°Workpiece spindle bore: MORSE K 6 mmSwivel position: +30°incl. extensive batch Tips in different sizes, matching steady rests, documentation, belt filter system, suctionHours read: 2355Attention: the machine can be transported on a standard truck up to 3000 mm wide ! Auction-ID: A7-49089-235

Multi-function portable electric knife sharpener for high-speed steel (HSS) drill bits, chisels, planes, knives and scissors. Rated power: 65 W, Input voltage: 230 V/50 Hz, No-load speed: 6700 rpm, Duty cycle: S3 15% (90 sec on, 510 sec off), Compatible drill bits: 3 x 10 mm, Compatible chisels and blades: 6 x 51 mm, Sharpening disc diameter: 48 mm Auction-ID: A7-49208-207

90W Electric Chain Sharpener Designed to be attached to a workbench, table, or wall in your garage or workshop. The working angle is adjustable from 0 to 35 degrees, adapting to different chains and sharpening depth. Equipped with a sharpening speed of 5000 rpm and a powerful 90W motor. The chain clamp fits all types and pitches of chains. Precise sharpening angle adjustment of 35 degrees to the right or left. Compact and mountable on any workbench, wall, vise or table. Auction-ID: A7-49208-111

90W Electric Chain Sharpener Designed to be attached to a workbench, table, or wall in your garage or workshop. The working angle is adjustable from 0 to 35 degrees, adapting to different chains and sharpening depth. Equipped with a sharpening speed of 5000 rpm and a powerful 90W motor. The chain clamp fits all types and pitches of chains. Precise sharpening angle adjustment of 35 degrees to the right or left. Compact and mountable on any workbench, wall, vise or table. Auction-ID: A7-49208-11

Rotational speed 7500 rpm, Power supply 230 V, Mass 2.0 kg, Plate size 100 mm / 3.2 mm Auction-ID: A7-49208-2

Machine number: 2355Operating voltage: 400 VFrequency: 50 HzRated current: 125 AConnection: 45 kWControl: SIEMENS SINUMERIKCenter height: 320 mmCenter width: 3000 mmMax. grinding length: 3000 mmGrinding spindle diameter: max. 620 mmGrinding spindle tool holder: 80 mm diameter, taper 1:5Swivel capability: +- 10°Workpiece spindle bore: MORSE K 6 mmSwivel capability: +30°incl. extensive item spare parts and accessories, documentation, grinding wheels, belt filter system, extraction and filterHours read: 2667Attention: the machine can be transported on a standard truck up to 3000 mm wide ! Auction-ID: A7-49089-231