serras usadas para venda (1,263)

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29800 €: 569.18 €: Schwenkrahmen : 3660x27x0,9 mm: 15-120 m/min: 320 mm: 320 mm: 350x320 mm: rund 170 mm, quadrat 150 : rund 260 mm, quadrat 220 : rund 320 mm, quadrat 280 : 740 mm: 1.1 kW: 2.2 kW: 1 kW: 0.12 kW: 2120 mm: 2100 mm: 1810 mm: 1810 kgNC control panelservo feed with ballscrew spindleshydraulic vicehydromechanical blade tensioninvertercoolant pumpsaw bladeblade brushsecurity switchheight adjustmentuser manual in GERMAN or ENGLISHOPTION:hydraulic blade tentioningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including roller conveyor, length 3000 mm. Auction-ID: A1-48474-55

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 34400 €: 657.04 €: Doppelsäulenführung : 4380x34x1,1 mm: 20-100 m/min: 325 mm: 325 mm: 400x325 mm: rund 325 mm, quadrat 325 : rund 300 mm, quadrat 265 : rund 190 mm, quadrat 190 : 655 mm: 1.1 kW: 2.2 kW: 0.12 kW: 2130 mm: 2150 mm: 1650 mm: 1860 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 38.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 20100 €: 385.92 €: Doppelsäulenführung : 4800x34x1,1 mm: 20-100 m/min: 380 mm: 380 mm: 520x380 mm: rund 300 mm, quadrat 300 : 590 mm: 0.55 kW: 3 kW: 0.12 kW: 2850 mm: 930 mm: 1660 mm: 1330 kg2° inclined bandblade brushcontrol panelhydraulic vicehydromechanical blade tensioninverter for continous adjustable cutting speedlinear guidesoptical height adjustmentpressure adjustmentcoolant pumpsaw bandsecurity switchheavy duty gearbox1,2 meter roller tableuser manual in GERMAN or ENGLISHOPTION:turn table for mitre cutshydraulic top clampingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-49027-10

: neu : ca. 4 Monate ab Auftragse : Türkei : 27600 €: 527.16 €: Doppelsäulenführung : 5750 x 41 x 1,3 mm: 15 - 120 m/min: 460 mm: 460 mm: 520 x 460 mm: 585 mm: 0.55 kW: 4 kW: 0.12 kW: 3000 mm: 1200 mm: 1800 mm: 1650 kgRoller feed with manually adjustable stop with micro switchPiece counterLinear guide41 mm saw bladeControl panelHydraulic viceHydromechanical blade tensionHeavy duty gearboxCoolant deviceMechanical upper clampingPressure adjustmentInverter for stepless blade speedRoller conveyor 1.2 mChip brushOptical height adjustmentOperating instructions in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DOUBLE HEAD CUTTING MACHINE Inv. No. 13.109Z1 Make MECAL Model SW-453 Mach. No. 9001099 Year 2002 Useful cutting length 4.000 mm Max. lame diameter 500 mm Pneumatic inclination of the heads 90° / 45° - 22.5° Including: External inclination Feeler Auction-ID: A1-49027-49

: neu : ca. 10 Wochen ab Auftrags : Italien : 9080 €: 175.24 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm: 1600 mm: 1400 mm: 1950 mm: 356 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 14110 €: 270.91 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 420x200 mm: rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm: 1600 mm: 1600 mm: 1800 mm: 488 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 11070 €: 212.54 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 420x200 mm: rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm: 1600 mm: 1400 mm: 1800 mm: 438 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Provided roller conveyor/feed conveyor, length approximately: 3600 mm, \"MEP\" Digital longitudinal stop, \"Anma\" deburring machine, various accessories Auction-ID: A1-48474-23

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5100 €: 98.43 €: 315 mm: 315x32x63 mm: 45 / 90 U/Min: rund 105 mm / quadratisch : rund 90 mm / quadratisch : 4.7 kW: 600 mm: 1000 mm: 1400 mm: 200 kgPneumatic viceLow-voltage start/stop switch in the handle45-degree left and 45-degree right mitre cutsSplit visc (clamps before and after the sawblade)Self-centering visc for optimal cutting positionLarge base frame for high stabilitySawblade not includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

In fully functional condition with additional parts. Auction-ID: A3-46182-17279

Maximum cutting capacity: 190 mm for round profiles, and up to 190 x 240 mm for flat parts Saw blade: Standard length of 350 mm 2 adjustable stroke speeds at 16 and 32 m/min Motorization: Three-phase motor 220/380v Auction-ID: A3-46182-39191

dimensions of saw-band: 3320x27x0,9 mm: 40/80 m/min: 335 mmcapacity 90 degrees: round: 300 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330x260 mm: 260 mm: 250 : 270x200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170x170 mm: 200 mm: 180 mm: 200x160 mmweight of the machine ca.: 640 kgdimensions of the machine ca.: 2140x1300x1950 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350x32x2,5 mm: 15-90 U/minvice: 190 mmcapacity 90 degrees: round: 115 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180x95 mm: 90 mm: 90 mm: 90x90 mm: 110 mm: 95 mm: 125x95 mm: 110 mm: 95 mm: 125x95 mmtotal power requirement: 3 kWweight: 685 kgOverall size: 2050x1100x1800 mmturning speeds: 15/90 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmdimensions of saw-blade: 350 x 32 x 2,5 mmcutting diameter: 115 mmstroke: 100 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: rechts & links 110 mmcapacity 45 degrees: square: rechts & links 95 mmcapacity 45 degrees: flat: rechts & links 125 x 95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 90 x 95 mmcutting speed: 15 / 30 / 45 / 90 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 375 kgdimensions of the machine ca.: 1000 x 950 x 1800 mmFeatures:- With miter adjustment 60° left / 45° right- Coolant device- 2 speeds- Machine base- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 3650 x 27 x 0,9 mmspeed: 15 - 100 m/minvice: 335 mmcapacity 90 degrees: round: 300 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 45 degrees: round: 260 / 200 mmcapacity 45 degrees: square: 250 / 180 mmcapacity 45 degrees: flat: 270 x 200 / 200 x 160 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170 x 170 mmtotal power requirement: 2,2 kWweight: 1.105 kgdimensions: 2700 x 2300 x 1800 mmFully automatic electro-hydraulic band saw with multi-micro processors andadditionally semi-automatic, semi-automatic-dynamic and manualFunction.- Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with twocontrolled axes that allow for the same material thickness 1000various editing programs, each with a different cutting length and quantity, tooprogram.- Semi-automatic, semi-automat ...

: 36/72 m/min: 285 mmdimensions of saw-band: 2950 x 27 x 0,9 mmcapacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: flat: 280x220 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 140x100 mmcapacity 45 degrees: round: 230/200 mmcapacity 45 degrees: square: 200/170 mmcapacity 45 degrees: flat: 220x200/200x140 mmtotal power requirement: 1,5/1,8 kWWeight: 485 kgOverall size: 1970x1150x1840 mmSemi-automatic function:- Vice closes and engine starts- Saw head lowers for the cut- Engine shuts off- Saw head lifts, vice opensSemiautomatic dynamic system:Manual lowering of the saw blade to the desiredPosition and cycle start via the manual button.Upper position is saved automatically.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 58000 €: 1096.2 €: Schwenkrahmen : 3120 x 27 x 0,9 mm: 15 - 101 m/min: 280 mm: 240 mm: 310 x 240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 5150 mm: 3200 mm: 1950 mm: 5000 x 2200 x 1900 mm: 2150 kgCNC control with 7", touchscreen for the following functions:Feed length, workpiece count, and automatic saw frame rotation for frame adjustmentAutomatic feed 3000 mm / strokeVariable cutting pressureMachine with infinitely variable speedCoolant systemMotorized chip brushChip conveyorAutomatic saw blade breakage monitoringHydraulic vicesRecommended max. diameter of solid material in automatic mode: 150 mmOperating manual in German or EnglishOPTIONS:Hydraulic bundle clamping device, micro-spray device, variable clamping pressure,10", s ...

cutting diameter: 300 mmcapacity 90 degrees: flat: 380 x 250 mmcapacity 90 degrees: square: 250 x 250 mmcapacity 45 degrees: flat: 300 x 200 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 x 250 mmcapacity 60 degrees: flat: 200 x 170 mmcapacity 60 degrees: square: 170 x 170 mmcapacity 60 degrees: round: 180 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3770 x 27 x 0.9 mmengine output: 1.5 / 1.8 kWweight: 695 kgdimensions of the machine ca.: 1950 x 1300 x 200 mmEquipment:- robust electro-hydraulic semi-automatic band saw machine (INDUSTRY)- with miter cuts from 45° right to 60° left Miter adjustment via large turntable- MEP microprocessor control EVO to control all functions front right, rotatable- optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow lowering- saw band guide made of hard metal plates- hydraulic saw b ...

capacity 90 degrees: round: 240 mmcapacity 90 degrees: square: 240 x 240 mmcapacity 90 degrees: flat: 165 x 210 mm: 195 mm: 185 x 185 mm: 130 x 190 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 85 x 85 mmcapacity 60 degrees: flat: 85 x 120 mm: 170 mm: 145 x 145 mm: 60 x 195 mmcutting speed: 20 - 85 m/mindimensions of saw-band: 2725 x 27 x 0,9 mm: 315 mmwork height max.: 900 mmMotor output: 1,2 kWWeight: 330 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mmband length: 450 mmcapacity 90 degrees: square: 240 x 240 mmcapacity 90 degrees: flat: 280 x 160 mmcapacity 45 degrees: round: 180 mmdimensions of saw-blade: 450 x 40 x 2.0 mmengine output: 2.6 kWheight of material-table: 500 mmweight of the machine ca.: 495 kgrange L-W-H: 1500 x 600 x 1340 mmFurnishing:- stepless hydraulic lowering- manual vice- Miter adjustment ü. vice- coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 x 32 x 2,5 mm: 15/30/45/90 U/minvice: 190 mmcapacity 90 degrees: round: 115 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180x95 mm: 90 mm: 90 mm: 110 mm: 95 mm: 125x95 mm: 110 mm: 95 mm: 125x95 mmtotal power requirement: 1,8/2,5 kWweight: 375 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 36720 €: 701.35 €: Doppelsäulenführung : 3270 x 27 x 0,9 mm: 40 - 80 m/min: 300 mm: 300 mm: 330 x 290 mm: rund 210 mm, quadrat 210 : rund 110 mm, quadrat 110 : 840 mm: 0.75 kW: 1.5 kW: 0.06 kW: 3070 mm: 2060 mm: 1930 mm: 2400 x 1700 x 1700 mm: 1210 kgDouble-column guided automatic band sawVertical infeed by means of longitudinal ball bearing guidesFeed length and number of pieces via CNC (up to 99 programmes)Automatic cutting cycle with sensor pinAutomatic material feed 800 mm / strokeVariable cutting pressure and infeed speedInfinitely adjustable band speedCooling lubricant deviceChip brushChip conveyorHydraulic clamping vices for clamping during the cut and on the feed carriageOperating instructions in GERMAN or ENGLISHALTERNATIVE:Version with 7", touchscreen control, additionally included:Automatic preselection of cutting param ...

dimensions of saw-band: 3350x27x0,9 mmcapacity 90 degrees: round: 260 mmcapacity 90 degrees: flat: 300x260 mmcapacity 45 degrees: round: 200 mmcapacity 45 degrees: flat: 180x180 mm: 130 mm: 120x120 mm: 25 mmmin. dia.: 5 mmwork height max.: 900 mm: 35/75 m/minweight: 710 kgStandard equipment:- Fast miter adjustment by scale- miter turning point is the point of intersection between saw blade and material system,no changes in the length measure- Manual material tension - at each angular position of the saw frame is theMaterial stretched parallel in 90 °- Cutting pressure reduction by weight of the heavy, torsionally stiffSawing frame and fine adjustment depending on the material cross section via hydraulicdamping cylinder- Machine stand with chip collecting tray- saw blade drive with limit stop- Precise saw band carbide roller guideAdditional standard equipment 260 DG-HS:- Hydraulic liftin ...

dimensions of saw-band: 2085x20x0,9 mmcapacity 90 degrees: round: 185 mmcapacity 90 degrees: square: 150x150 mmcapacity 90 degrees: flat: 220x150 mmCutting area at 45 degrees right: round: 110 mmCutting range at 45 degrees right: square: 100x100 mmCutting range at 45 degrees right: flat: 110x90 mmcapacity 60 degrees: round: 70 mmcapacity 60 degrees: square: 70x70 mmcapacity 60 degrees: flat: 70x70 mmvoltage: 230 Vsawband speed: 30-75 m/min.Vice opening: 230 mmtotal power requirement: 2,35 kWweight of the machine ca.: 200 kgdimensions of the machine ca.: 1280x550x1480 mmDomestic equipments:- stepless, electronic speed control- Optional hydraulically controlled or manual belt arm lowering- Saw arm can be swiveled up to 60 ° right- quick release vice- Band guide with 8 ball bearings- Hydraulic saw blade clamping with clamping pressure display and strip break-off- Including coolant device-  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14200 €: 272.64 €: Schwenkrahmen : 4160x34x1,1 mm: 20-100 m/min: 320 mm: 320 mm: 610x320 mm: rund 260 mm, quadrat 225 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : 740 mm: 0.37 kW: 2.2 kW: 0.12 kW: 2100 mm: 1200 mm: 1350 mm: 1150 kg: rund 320 mm, quadrat 320 blade brushcontrol panelheight adjustment by switchhydromechanical belt tensioninvertermaterial limitation shaftcooling equipmentsaw bladesecurity switchgearboxadjustable graduation scale for miter cuts1,2 meter roller conveyorhydraulic lifting of the saw frameuser manualin GERMAN or ENGLISHOPTION:hydraulic top clampingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmdimensions of saw-blade: 350 x 32 x 2,5 mmcutting diameter: 115 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: rechts & links 110 mmcapacity 45 degrees: square: rechts & links 95 mmcapacity 45 degrees: flat: rechts & links 125 x 95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 90 x 95 mmcutting speed: 15 - 90 m/mintotal power requirement: 2,5 kWweight of the machine ca.: 400 kgdimensions of the machine ca.: 1000 x 950 x 1800 mmFeatures:- With miter adjustment 60° left / 45° right- Machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300x32x2,5 mmcapacity 90 degrees: round: 10-90 mmcapacity 90 degrees: flat: 80x10-80 mmcapacity 90 degrees: square: 10-80 mmCutting range at 90 degrees: round - solid materia: 10 - 40 mmCutting range at 90 degrees: flat - solid material: 40x10-40 mmCutting range at 90 degrees: square -solid materil: 10- 40 mmturning speeds: 1700/3400 U/minweight of the machine ca.: 600 kgdimensions of the machine ca.: 2590x1910x1910 mmAccessories:-Footswitch with emergency stop-Micro spraying device-HM circular saw blade 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.