serras usadas para venda

Tape welding machine for sawmills up to 35mm Manufacturer Ideal Type B1 220 Volt 6 Ampere Special price  ... mais informação

Band saw Jespa 340/630 HAP column guided Band saw Jespa Semi-automatic Type 340/630 HAP Column-guided Built in 2009 Saw blade length 5.150mm  ... mais informação

Band saw with program preselection for saw length and quantities Manufacturer Meba Built in 2001 Type 407 Feeding roller conveyor Laxative roller conveyor  ... mais informação

Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.  ... mais informação

Inv. Num. : 7509 Type: DG 79/31 M Producer: Elumatec Created: 2009 Parameters: Maximum sawing speed: 2800 1/min Cutting length: 520 mm Wheel diameter: 380 mm Motor power: 3 kW  ... mais informação

Inv. Num. : 4854 Type: TS 161/21 Producer: Elumatec Created: 2004 Parameters: Maximum saw speed: 3200 1/min Saw blade diameter: 280 mm Electrical connection: 230/400 V. 3~. 50 Hz Power output: 1.05 kW Machine dimensions: 650x750x1300 mm Machine weight:: 130 kg Accessories: Roller conveyor Two saws A Lesson Slices

Inv. Num. : 5876 Type: ARG 640 DC SAF Producer: PILOUS Created: 2016 Parameters: Minimum belt feed speed: 20 m/min Maximum belt feed speed: 90 m/min Cutting area: 640 mm Saw blade size: 5770x41x1.3 mm Total power requirement: 8.8 kW Length: 3800 mm Width: 2050 mm Height: 2500 mm Weight: 4200 kg Equipment: 2x roller conveyor G1000 (length 3000 mm)

Inv. Num. : 7367 Type: 335 GA Producer: MEBA Created: 2012 Parameters: Minimum belt feed speed: 15 m/min Maximum belt feed speed: 150 m/min Saw blade dimensions: 4400 x 34 x 1.1 mm Cutting area: 335 mm Length: 5350 mm Width: 2300 mm Height: 2000 mm Weight: 2020 kg  ... mais informação

Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc  ... mais informação

Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding  ... mais informação

Inv. Num. : 6503 Type: ALU-U12 Producer: KASTO Generated: 2015 Parameters: Maximum sawing speed: 2800 1/min Spindle power: 1.5 kW Machine dimensions: 650 x 800 x 1300 mm Machine weight: 150 kg Equipment: Saw blade  ... mais informação

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

CARTER CNC 4.2 M double mitre saw built in 2021 is ideal for high-volume production that requires precise cutting of workpieces with a maximum length of 4200 mm. The machining of workpieces at 90° and 45° is performed with the utmost precision and accuracy using high-quality discs driven by powerful electric motors. The machine has been used very little to date – it has only been in operation for 1 hour a day. Technical specifications of the CARTER CNC 4.2 M sawing machine - controller: SIEMENS - machinable materials: aluminium, PVC - maximum workpiece length: 4200 mm (possibility to cut oversized workpieces with a length of 7 m) - cutting angle: 45°; 90° - HMI panel: SIEMENS SMART LINE TOUCH - power supply: 380 V; 50 Hz - dimensions of the machine (L x W x H): 4600 x 900 x 1600 mm

UZAY MAKINA UMSY 1300 band saw was built in Turkey in 2001. The machine, equipped with a high-quality saw blade with hydraulic blade tension and the possibility of adjusting the cutting height via a control panel, is designed for the precise cutting of workpieces made of even the hardest materials, such as titanium. The specially designed double-jaw vise system significantly increases the capacity of the machining process, thanks to the possibility of positioning the workpiece at the front and at the back of the UZAY MAKINA UMSY 1300-1600 SP machine. The UZAY MAKINA 1300 x 1600 double-column sawing machine weighs approximately 8200 kg. Technical data of the UZAY MAKINA UMSY 1300 band sawing machine - saw blade dimensions (L x W x H): 12000 x 67 x 1.6 mm - maximum cutting speed: 100 m/min - minimum cutting speed: 20 m/min - maximum cut at 90° (circle): 1300 mm - maximum cut at ...

Electrical voltage 400 V Frequency 50 Hz N° Phases 3 / 3 Ph Mass 486 Kg Dimensions sheet 2700 x 27 x 0.9  ... mais informação

Electrical voltage 400 / 440 V Frequency 50 / 60 Hz N° Phases 3 / 3 Ph  ... mais informação

The ELUMATEC SA 142/36 automatic aluminium cutting saw was manufactured in 2001 by the German brand ELUMATEC. The machine can be used for cutting aluminum profiles and PVC joinery. So far, it has only been used for cutting aluminium profiles. - Surface-specific material feeding (cyclic) via profile lifting system on one level - Single, double or triple feeding via selector switch - Safe material feeding thanks to two horizontal pressure cylinders Cvmmdigqg2 - Large cutting surface for wide profiles Technical parameters of the ELUMATEC SA 142/36 aluminium cutting saw: - saw speed: 2800 rpm. - cutting angle: 90 degrees to 45 degrees at SA 142/36 - cutting angle: 90 degrees at SA 142/36 - power output: 4000 W - Cutting unit feed: adjustable gradually - feed length/stroke : 5 to 730 mm - material transport: transport in step steps, pneumatic - air consumption without sprink ...

Article number: 19-03-036 Manufacturer: Pehaka Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1976 L x W x H: approx. 1400x800x1900mm Weight: approx. 650kg Saw blade length: approx. 4400-4500mm Saw band width: approx. 6-35mm Max. installation height: approx. 300mm Projection: approx. 600mm Drive power: approx. 3.0kW Accessories  2 pieces of bandsaw blades Other accessories on request Price and other technical data on request

Saw blade diameter: 500 mm profile height: 250 mm profile width: 400 mm jack height: 215 mm jack depth: 185 mm Material stop swivel between 22.5° and 157.5° Jack height can be adjusted by motor with digital display Motor adjustment of the angles with digital display Depth stop motor adjustable with digital display Automatic sawing sequence via control with preselection of the cutting angles Pneumatic material clamps Coolant lubrication

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...