serras usadas para venda (1,264)

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14200 €: 272.64 €: Schwenkrahmen : 4160x34x1,1 mm: 20-100 m/min: 320 mm: 320 mm: 610x320 mm: rund 260 mm, quadrat 225 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : 740 mm: 0.37 kW: 2.2 kW: 0.12 kW: 2100 mm: 1200 mm: 1350 mm: 1150 kg: rund 320 mm, quadrat 320 blade brushcontrol panelheight adjustment by switchhydromechanical belt tensioninvertermaterial limitation shaftcooling equipmentsaw bladesecurity switchgearboxadjustable graduation scale for miter cuts1,2 meter roller conveyorhydraulic lifting of the saw frameuser manualin GERMAN or ENGLISHOPTION:hydraulic top clampingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmdimensions of saw-blade: 350 x 32 x 2,5 mmcutting diameter: 115 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: rechts & links 110 mmcapacity 45 degrees: square: rechts & links 95 mmcapacity 45 degrees: flat: rechts & links 125 x 95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 90 x 95 mmcutting speed: 15 - 90 m/mintotal power requirement: 2,5 kWweight of the machine ca.: 400 kgdimensions of the machine ca.: 1000 x 950 x 1800 mmFeatures:- With miter adjustment 60° left / 45° right- Machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300x32x2,5 mmcapacity 90 degrees: round: 10-90 mmcapacity 90 degrees: flat: 80x10-80 mmcapacity 90 degrees: square: 10-80 mmCutting range at 90 degrees: round - solid materia: 10 - 40 mmCutting range at 90 degrees: flat - solid material: 40x10-40 mmCutting range at 90 degrees: square -solid materil: 10- 40 mmturning speeds: 1700/3400 U/minweight of the machine ca.: 600 kgdimensions of the machine ca.: 2590x1910x1910 mmAccessories:-Footswitch with emergency stop-Micro spraying device-HM circular saw blade 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4700 €: 315 mm: 315x32x63 mm: 45 / 90 U/Min: 45 °: 45 °: rund 105 mm / quadratisch : rund 90 mm / quadratisch : rund 90 mm / quadratisch : 1,3 - 1,8 kW: 600 mm: 1000 mm: 1400 mm: 200 kgManual viceRobust double joint pivotLow-voltage start/stop switch in the handle45-degree left and 45-degree right mitre cutsSplit vice (clamps before and after the sawblade)Sawblade not includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw band length: 3.000 mmmax. workpiece height: 215 mmtable-size: 605 x 605 mmcutting speed: 12 - 750 m/mintransmission ratio: 4 throat: 410 mmturning speed range: 39 - 2.460 U/mintotal power requirement: 2 kVAweight of the machine ca.: 0,6 tdimensions of the machine ca.: 2,0 x 2,0 x 2,5 mBandsawMÖSSNER - Rekord SM 420- Operating Hours: 2.651 h- Table swivable- incl. replacement saw blades:1x 30,000 x 13 x 0.65mm4x 30,000 x 6 x 0.65mm1x 15m (6H) 13 x 0.9mm1x 15m (10H) 13x 0.9mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcutting diameter: 120 mmcapacity 90 degrees: flat: 170 x 100 mmcapacity 45 degrees: round: 120 mmcapacity 45 degrees: flat: 95 x 100 mmturning speeds: 34 / 88 U/mintotal power requirement: 0,75/1,5 kWweight of the machine ca.: 340 kg.dimensions of the machine ca.: 0,7 x 1,0 x 1,85 mFeatures:- Coolant system - Replacement saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmdimensions of saw-blade: 350 x 30 x 50 mmmachine weight ab.: 100 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 33700 €: 643.67 €: Doppelsäulenführung : 6300 x 41 x 1,3 mm: 15 - 120 m/min: 440 mm: 440 mm: 640 x 440 mm: rund 440 mm, rechteck 400 : rund 250 mm, rechteck 250 : rund 390 mm, rechteck 390 : 860 mm: 1.1 kW: 4 kW: 0.12 kW: 3150 mm: 1850 mm: 2115 mm: 2050 kg3° inclined sawing bandblade brushcontrol panelhydraulic vicehydromechanical blade tensioninverterlinear wayheight adjustmentpressure adjustmentcoolant pumpsaw bladesecurity switchgearboxsyncronized movement of sawing arm/clamping jawhydraulic uplift of sawing frameuser manual in GERMAN or ENGLISHALTERNATIV:Version BMSY 440 CDGH NCwith automatic mitre adjustment by NC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting range: 300 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 45 degrees: square: 250 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 170 mmcapacity 60 degrees: square: 180 mmautomatic feeds: 9999,9 mmfeed: minimum 2.0 mmcutting diameter: minimum 5.0 mmband speed: 15 - 100 m/minvice: 340 mm Öffnungdimensions of saw-band: 3650 x 27 x 0,9 mmControl: MEP CNC total power requirement: 2.2 kWweight: 1240 kgrange L-W-H: 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on requestEquipment:- robust electro-hydraulic fully automatic band saw (INDUSTRY)- with additional semi-automatic function, for cuts from 0° to 60° left- WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick setting of all machine pa ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 104600 €: 1976.94 €: Doppelsäulenführung : 10430x54x1,6 mm: 20-100 m/min: 750 mm: 1300x700 mm: rechteck 850 x 750 mm : rechteck 570 x 750 mm : rechteck 850 x 750 mm : 930 mm: 4 kW: 11 kW: 0.12 kW: 5500 mm: 2280 mm: 3400 mm: 8500 kgHydraulic viceDigital display for angle indicationHydraulic saw arm clampingManual saw arm rotationContinuously adjustable saw arm lowering speedAutomatic saw frame lifting after cuttingSensitive cutting pressure regulation depending on material propertiesHydromechanical blade tension readable via pressure gaugeMobile control panelHeavy-duty, helical-toothed conical gearDriven chip brushBlade guidance via carbide plates and rollersAutomatic blade breakage protectionCoolant systemHydraulic saw frame liftingOperating instructions in GERMAN or ENGLISHOPTIONS:Roller tables and band saw blades on requestThe data fo ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 82900 €: 1566.81 €: Doppelsäulenführung : 8400x54x1,6 mm: 20-100 m/min: 650 mm: 1000 x 600 mm: rechteck 660 x 600 mm : rechteck 440 x 600 mm : rechteck 660 x 600 mm : 880 mm: 4 kW: 7.5 kW: 0.12 kW: 4400 mm: 2270 mm: 2660 mm: 6520 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the softwar ...

cutting range: 300 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 45 degrees: square: 250 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 170 mmcapacity 60 degrees: square: 180 mmautomatic feeds: 9999,9 mmfeed: minimum 2 mmcutting diameter: minimum 5 mmband speed: 15 - 100 m/minvice: 340 mm Öffnungdimensions of saw-band: 3650 x 27 x 0,9 mmControl: total power requirement: 2,2 kWweight: 1240 kgrange L-W-H: 1800 x 1900 x 1750 mmEquipment:- robust electro-hydraulic fully automatic band saw (INDUSTRY)- with additional semi-automatic function, for cuts from 0° to 60° left- WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick setting of all machine parameters with additional soft keys + backlit display 10 programs, each w ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 27700 €: 529.07 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 560 mm: 560 mm: 750x560 mm: rund 410 mm, quadrat 410 : 590 mm: 1.1 kW: 4 kW: 0.12 kW: 3400 mm: 1000 mm: 2050 mm: 2045 kg2° inclined bandlinear guidescontrol panelmaterial limit shaftcoolant pump1200 mm roller tablehydraulic vicehydromechanic band tensioninginverterpresser adjustmentband brushoptical height adjustmentsecurity switchoperating manual in EnglischOPTION:turn table for mitre cutshydraulic top clamping from abovemicro cooling unitlaser cutting lineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting range: 300 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 45 degrees: square: 250 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 170 mmcapacity 60 degrees: square: 180 mmautomatic feeds: 9999,9 mmfeed: minimum 2.0 mmcutting diameter: minimum 5.0 mmband speed: 15 - 100 m/minvice: 340 mm Öffnungdimensions of saw-band: 3650 x 27 x 0,9 mmControl: MEP CNC total power requirement: 2.2 kWweight: 1240 kgrange L-W-H: 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on requestEquipment:- robust electro-hydraulic fully automatic band saw (INDUSTRY)- with additional semi-automatic function, for cuts from 0° to 60° left- WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick setting of all machine pa ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 54900 €: 1037.61 €: Doppelsäulenführung : 5400x41x1,3 mm: 20-100 m/min: 440 mm: 440 mm: 610x440 mm: rund 440 mm, quadrat 440 : rund 430 mm, quadrat 430 : rund 320 mm, quadrat 260 : 807,5 mm: 1.1 kW: 4 kW: 0.12 kW: 2850 mm: 2350 mm: 2000 mm: 3600 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 61.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 300 mmcapacity 90 degrees: square: 250 mmcapacity 90 degrees: flat: 380x250 mm: 260 mm: 250 mm: 300x200 mm: 180 mm: 170 mm: 200x170 mm: 240 mm: 210 mm: 280x160 mmdimensions of saw-band: 3770x27x0,9 mm: 385 mmspeed: 40/80 m/mintotal power requirement: 1,5/1,8 kWweight: 695 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 22700 €: 435.84 €: Doppelsäulenführung : 4800x34x1,1 mm: 20-100 m/min: 380 mm: 380 mm: 430x380 mm: 590 mm: 0.55 kW: 3 kW: 0.12 kW: 2900 mm: 950 mm: 1660 mm: 1342 kgblade brushcontrol panelhydraulic viceoptical adjustment switchhydromechanical blade tensioninvertermechanic top clampingmaterial limit shaftcoolant pumpsaw bladesecurity switchgearboxpressure adjustment1,2 meter roller tableuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 45100 €: 861.41 €: Doppelsäulenführung : 5200x34x1,1 mm: 20-100 m/min: 360 mm: 360 mm: 610x360 mm: rund 360 mm, quadrat 360 : rund 360 mm, quadrat 360 : rund 325 mm, quadrat 265 : 735 mm: 1.5 kW: 3 kW: 0.12 kW: 2850 mm: 2250 mm: 1870 mm: 2400 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 50.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 355 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: square: 125 x 125 mmcapacity 90 degrees: flat: 170 x 110 mmturning speeds: 700 / 900 / 1100 / 1300 U/minmitre joint cuts -/+ degrees: - 45 / + 0 total power requirement: 3.5 kWweight of the machine ca.: 25.0 kgDescription:- mobile dry metal cutter - for use on a construction site, among other things- with brushless motor - particularly efficient, durable and maintenance-free- for burr-free sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant- use e.g. in metal construction, in carpentry, for interior fitters, etc.- easy to transport- four speeds can be selected at the touch of a button- motor with soft start- digital display showing the selected speed. and current power in watts- angle adjustment 0° - 45° for miter cuts- vice with quick ...

cutting diameter: 250 mmcapacity 90 degrees: flat: 280 x 220 mmcapacity 90 degrees: square: 220 x 220 mmcapacity 45 degrees: round: 230 mmcapacity 45 degrees: flat: 220 x 200 mmcapacity 45 degrees: square: 200 x 200 mmcapacity 60 degrees: flat: 140 x 100 mmcapacity 60 degrees: square: 100 x 100 mmcapacity 60 degrees: round: 110 mmvice: 285 mmturning speed range:: 36/72 m/minsaw band length: 2.950 x 27 x 0,9 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 440 kg.dimensions of the machine ca.: 1620 x 1360 mmEquipment:- robust electro-hydraulic band saw (INDUSTRY)- large bearing-mounted rotary table for miter cuts from 45° right to 60° left- automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut- manual cutting function selectable- saw band guide made of hard metal plates- 1x saw band- 1x angle stop- moving chip removal brush- contr ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 10860 €: 208.51 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 370x140 mm: rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm: 1650 mm: 1200 mm: 1850 mm: 390 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw band length: 4400 x 34 x 1,1 mmband speed: 15 - 150 m/mincapacity 90 degrees: square: 500 x 335 mmcapacity 90 degrees: round: 335 mm: 330 mm: 320 x 335 mm: 305 mm: 305 x 335 mm: 180 mm: 170 x 335 mmwork height max.: 750 mmmachine weight ab.: 1320 kgMotor Capacity: 3 kWdimensions: 1450 x 2350 x 1950 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 25-138 m/mindimensions of saw-band: 1440x13x0,65 mmcapacity 90 degrees: round: 150 mmcapacity 90 degrees: square: 125 mmcapacity 90 degrees: flat: 150x125 mmcapacity 45 degrees: round: 75 mmcapacity 45 degrees: square: 50 mmcapacity 45 degrees: flat: 70x50 mmweight of the machine ca.: 35 kgControl: Standard features:- right and left miter- Single-phase 1800 watt motor- Safety switch- Electronic rotary speed controller 25-138 m / min. with torque controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 34400 €: 657.04 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 540 mm: 540 mm: 750x540 mm: rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm: 4 kW: 0.12 kW: 3000 mm: 1300 mm: 2150 mm: 2445 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmenthydraulic uplift of sawing frame3° inclined saw banduser manual in GERMAN or ENGLISH(the vertical hydraulic clamping shown on the photos ist op ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 46400 €: 886.24 €: Doppelsäulenführung : 6800x41x1,3 mm: 20-100 m/min: 560 mm: 820 x 540 mm: rechteck 550 x 540 mm : rechteck 360 x 540 mm : rechteck 550 x 540 mm : 880 mm: 1.1 kW: 4 kW: 0.12 kW: 3800 mm: 1750 mm: 2350 mm: 3200 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISH(roller table see photo - optional available, additional price ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 23800 €: 456.96 €: Doppelsäulenführung : 5200x41x1,3 mm: 20-100 m/min: 460 mm: 460 mm: 650x460 mm: rund 380 mm, quadrat 380 : 590 mm: 0.55 kW: 4 kW: 0.12 kW: 3100 mm: 1000 mm: 1800 mm: 1520 kgblade brushcontrol panelhydraulic vicehydromechanical blade tensioninverterlinear waymaterial limit shaftheight adjustmentpressure adjustmentcoolant pumpsaw bladesecurity switchgearbox1,2 meter roller tableuser manual in GERMAN or ENGLISHOPTION:turn table for mitre cutshydraulic top clamping from aboveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 8300 €: 160.19 €: Schwenkrahmen : 3010x27x0,9 mm: 35/70 m/min: 260 mm: 240 mm: 330x120 mm: rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm: 1500 mm: 1400 mm: 1850 mm: 345 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-blade: 350 x 32 x 3,4 mm: 1700/3400 U/mincapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 105 mmcapacity 90 degrees: flat: 180x70 mmcapacity 45 degrees: round: 120/110 mmcapacity 45 degrees: square: 100/95 mmcapacity 45 degrees: flat: 135x60 mmoutput: 1,5/2,2 kwweight: 280 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 800x500 mmsaw band length: 7200x40 mmcutting width: 880 mmcutting speed: 60-100 m/minengine output: 7,5 kWweight: 8800 kgtotal power requirement: 7,5 kWweight of the machine ca.: 16 tdimensions of the machine ca.: 26500x6000x2100 mHorizontal bandsaw manufacturer: Behringer, Horizontal bandsaw Automatic bandsaw type HBP 430Metal bandsaw, Band saw machine, bandsaw, Vertical bandsaw, Horizontal bandsaw, hydr. horizontal bandsaw machine, Semi autom, Band saw machine,Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 375 mmCutting height: 150 mmdimensions of saw-blade: 500 x 30 mmMotor output: 2 x 3 kWCutting length: 5100 mmspeeds: 2800 U/minair pressure: 6 barweight of the machine ca.: 700 kgdimensions of the machine ca.: 6100 x 1450 x 1450 mm Profile support plate made of steel Stable cast construction of the saw unit Large cutting range, 2 profiles can be cut at the same time Easy adjustment of the moving unit with roller guides Double storage of the swivel device Safe clamping thanks to the two-pressure system Double saw feed guide Hydropneumatic saw feed External dimension correction scale Left saw unit fixed Swivel range 45°-90° Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.