trabalho de chapa metálica usadas para venda (3,318)

sheet width: 3100 mmplate thickness: 3 mmrear stop: 1000 mmdown holder: 18 Stkcutting angle: 0.5 - 1,0° 30° °oil volume: 150 ltotal power requirement: 5,5 kWweight: 4300 kgdimensions of the machine ca.: 3800 x 1950 x 1600 mmFurnishing:- electric back gauge 750 mm- front support plates with ball rollers- Light barrier behind the machine- Hydraulic cutting adjustment- Cutting gap regulation via handwheel- LED cutting edge lighting- 1x side stop with scale 1500 mm- 1x freely movable foot switch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 40 mmpre-bending: 32 diameter of upper rolls: 460 mmdiameter of lower rolls: 420 mmside roll diameter: 360 mmpower capacity: 30 kWmin. bending diameter: 1380 mmweight of the machine ca.: 30,1 tdimensions of the machine ca.: 6,3 x 2,3 x 2,6 m4 Rolls Hydraulic Bending MachineStandard Features:- hardened and polished rolls- complete body made of ST-52 steel- hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls- top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered- separate control panel- oil cooler - conic bending- in accordance to CE-norm- Warranty 12 monthsOptional Accessories:- variable speed of rotation (5.858,00 Euro)- material feeding table (5.100,00 Euro)- center support (18.750,00 Euro)- 2 x side supports (15.000,00 Euro)The data for this ad  ...

largura máxima da chapa: 200 mmespessura da placa: 6 mmaço plano: 70 x 7 mmaço barra redonda: 13 mmpeso da máquina ca.: 50 kgdimensões da máquina ca.: 800 x 500 x 1800 mm

espessura da placa: 0,8 mmgarganta: 180 mmdiâmetro do rolo: mmpeso da máquina ca.: 22 Kgdimensões da máquina ca.: 500 x 450 x 160 mmA máquina de flange está equipada com:- Interruptor de emergência- Footswitch- 7 pcs. Conjuntos de rolos

: Hebefix A10 peso máx.: 10 tpeso da máquina ab.: 49 kg (2 Stück) kg:

espessura da placa: 4 mmdiâmetro do rolo: 125 mmgarganta: 200 mmnecessidade de potência total: 2,2 kWpeso da máquina ca.: 0,48 tdimensões da máquina ca.: 1,6 x 0,6 x 1,2 mm• 5 velocidades• Com controle de pé• Com motor de freio• Com parada de emergência• Com ajuste de rolo hidráulico• Com 4 conjuntos de rolos

sheet width: 1070 mmplate thickness: 2,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 76 mmtotal power requirement: Handbetrieben weight of the machine ca.: 0,22 tdimensions of the machine ca.: 1,8 x 0,8 x 1,3 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: für Draht hydraulically tiltable: ja : 2 t Year: unbekannt : Hydraulik Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1000 kgworkpiece diameter: 20-800 mmconnected load frequency: 230 Vspeed: 100 - 1000 mm/mintotal power requirement: 0,1 kWweight of the machine ca.: 65 kgdimensions of the machine ca.: 520x470x390 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 tworkpiece diameter: 250 - 2500 mmdrum diameter: 250 x 100 mmfeed: 100 - 1000 mm/mintotal power requirement: 0,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2 Número de eixos: 4 Cone St.tool: HSK 63 torres de portagem: 60 peso: 9600 kg

espessura da placa: 3 mmcomprimento da lâmina: 250 mmângulo ajustável de - para: fest 90 Área de superfície da tabela gradual: 900 x 790 mmNecessidade de potência total: kWpeso da máquina ca.: 0,65 tdimensões: 1,2 x 0,9 x 1,1 mMáquina de entalhe hidráulica- Footswitch- 2 pcs. parada de chapa metálica

sheet width: 1070 mmplate thickness: 3,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 420 Kgdimensions of the machine ca.: 1600 x 800 x 1200 mmMotorized sheet metal bending machine with:- Foot switch for left / right- manually adjustable rear roller- Hardened rollers- Conical bending- Swiveling top roller- Safety device emergency leash- Documentation currently only in English- 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Está disponível uma máquina de escovagem e rebarbação de aço Lissmac. Largura de passagem: 1500mm, espessura máxima da folha: 20mm, média: bloco de escovagem, dimensões da máquina X/Y/Z: aprox. 3100mm/1400mm/1800mm, peso: aprox. 2300kg. Documentação disponível. É possível uma inspeção no local.

sheet width: 170 mmplate thickness: 0 mmnumber of rolls: 0 weight of the machine ca.: 0,1 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Peso máximo da bobina: 3t, largura máxima da tira: 500mm, espessura da tira: 0.4-5mm, carga conectada: 0.55kW. Com controle, alisador e unidade hidráulica Rexroth, sem documentação. É possível uma inspeção no local.

: 100 x 5 mmaço de borda quadrada: 16 x16 mmaço barra redonda: 18 mmfeixe L: 100 x 8 mmdimensões: 0,9 x 0,25 x 0,3 mpeso: 0,025 t

largura da folha: 2000 mmespessura da folha - máx.: 6 mmcarga ligada: 7,5 kW: . com pé de cabra: .

largura do material: 300 mmespessura do material: 3 mmcorte transversal: peso da máquina ca.: 0,12 tdimensões da máquina ca.: 0,5, 1, 1 mTriturador de bobinas

pressure / power: 50 kN control: Siemens Simatic OP 7 serial number: 2263 weight of the machine ca.: 2 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diâmetro do tubo: 12-54 mm (Kupfer / Edels. mmnúmero de série: EBD 022 99 002 modo de operação: Schneiden / Entgraden / Re velocidade: Rollen 450 U/min m/min

weight max.: 10 tworkpiece diameter: 320 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control panel: Boschert Stanze Year: 1990 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 75 (800) mm: 60 (750) mmL-beam: 80 x 80 x 8 (800) mmT - beam - web outwards: 100 x 11 (1000) mmAxis diameter: 80 mmwork speed: 6,0 m/minTool diameter: 242 mmtotal power requirement: 4 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 1,5 x 1,05 x 1,4 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

largura da folha: 1020 mmespessura da placa: 2,5 mmdistância entre colunas: 1050 mmabertura à luz do dia: mm: 135 requisito de potência total: Handbetrieben kWpeso da máquina ca.: 0,32 tdimensões da máquina ca.: 1,4 x 0,6 x 1,3 mMáquinade dobra por segmento Larguras do segmento: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 e 260mm.

diâmetro do tubo: bis 60 mmpeso da máquina ca.: 1,8 t

: 30 mm: 30 mmL-beam: 20 x 20 x 4 mmflat steel: 25 x 6 mmAxis diameter: 20 mmwork speed: 11 U/mintotal power requirement: 0,2 kWweight of the machine ca.: 80 Kgdimensions of the machine ca.: 0,6 x 0,6 x 1,5 mProfile bending machine with:- Foot pedal for right/left rotation- Digital display- 1 set of standard rollers- 3 rollers are driven- Horizontal or vertical operationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

largura da folha: 2050 mmespessura da placa: 8 mmdistância entre colunas: mmelétrica: . Peso da máquina ca.: 6,3 t

sheet width: 610 mmplate thickness: 1,0 mmdistance between columns: 620 mmdiameter of upper rolls: 38 mmtotal power requirement: Handbetrieben weight of the machine ca.: 40 Kgdimensions of the machine ca.: 950 x 270 x 360 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mmplate thickness: 3 mmdistance between columns: 1600 mmback stop - adjustable: 600 mmconnected load: 3 kWweight of the machine ca.: 1,1 tdimensions: 2,06 x 2,14 x 1,21 mDemonstration machine with small paint damage.The machine works quietly and is powered by its geared motorBraking system energy-saving.Our machine is welded as a monobloc body from ST42 quality material.The knives of the machine are of 2379 quality and the brand name is BOHLER.These high-quality knives guarantee precise cutting.Emergency stop button, foot switch and finger guard are includedstandard equipment.(Documentation in English only)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.