trabalho de chapa metálica usadas para venda (3,311)

: neu : ca. 2 Wochen ab Auftragse : Italien : 2000 mm: 11 mm: 11 mm: 7 mm: 8 mm: 6.4 mm: 225 mm: 215 mm: 165 mm: 8 m/min: 3950 mm: 1200 mm: 1200 mm: 4450 kgHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top ...

: neu : ca. 8 Wochen ab Auftragse : Türkei : 3100 mm: 6 mm: 4 mm: 50 mm: 15 1/min: 1.5 °: 16 : 14 to: 1000 mm: 200 mm/s: 15 kW: 200 l: 2 Stk.: 865 mm: 500 mm: 3515 mm: 4110 mm: 2200 mm: 3700 mm: 2100 mm: 7300 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade fourfold turnableUpper bla ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11800 €: 226.56 €: 1050 mm: 5 mm: 130 mm: 3,5 m/min: 2.2 kW: 2200 mm: 750 mm: 1000 mm: 1200 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS (PRICES ON REQUEST):hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : 1030 mm: 6 mm: 4 mm: 14 1/min: 3 °: 7 : 500 mm: 5.5 kW: 100 l: 900 mm: 1550 mm: 1150 mm: 1600 mm: 1700 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6 mmstroke: 160 mmrear stop: 1000 mmtotal power requirement: 5,5 kWmachine weight ab.: 6.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: 70.0 tpunch diameter: 26.0 in 20.0 mmpunch diameter: 57.0 in 9.0 mmthroat: 305 mmround bar steel: 45.0 mmsquare edge steel: 45.0 x 45.0 L-beam: 130 x 13 mmshear: flat material: 300 x 20.0 / 375 x 15 mmblade length: ca. 380 mmadjustment of stroke: 0 - 55 mmstrokes per minute: 34 work height max.: 1030 / 890 mmrectangle notching till: max. 10.0 mm STvoltage: 400 Vtotal power requirement: 5.5 kWweight: 1620 kgdimensions: 1700 x 1000 x 1800 mm Well-maintained condition () Current new price ~ 20.000 euros Special price upon requestFeatures:- Robust electro-hydraulic structural steel shear- Equipped with multiple workstations: Punching station Flat bar shear Angle/profile steel shear Notching station- Infinitely adjustable stroke length- Very compact design- Support table at the notching and punching stations- Lateral support surfaces- 2x mobile foot switches- Connection cab ...

punching pressure: 36.0 tpunch diameter: 27.0 in 10.0 mmthroat: 170 mmround bar steel: 30.0 mmL-beam: 80 x 80 x 8 mmsquare edge steel: 25 x 25 mmshear: flat material: 350 x 6 / 200 x 13 mmblade length: 356 mmstrokes per minute: ca. 24 pro Minwork height max.: 980 mmoil volume: 30.0 lvoltage: 400 Vtotal power requirement: 2.2 kWweight: 485 kgdimensions: 1200 x 800 x 1500 mm From a maintenance workshop Original price of base machine ~ 12.000 euros Special price upon request Features:- Compact electro-hydraulic structural steel shears- Punching station, flat steel shear, angle/profile steel shear- Sturdy welded construction- Very compact design- Side support surfaces - Various punches and dies (red metal box)- 1x freely movable foot switch- Emergency stop button- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60.0 tpunching cross-cut in cmm: 28 in 15 / 38 in 11 mmsquare edge steel: 35 x 35 mmL-beam: 120 x 120 x 12 mmround bar steel: 40.0 mmflat steel: 200 x 20 / 300 x 15 mmblade length: 317 mmthroat: 220 mmwork height max.: 940 / 1140 mmstrokes per minute: max. 26 work stroke: max. 55.0 mmoil volume: 23.0 ltr.total power requirement: 4.0 kWweight of the machine ca.: 1440 kgDimensions (HxWxD): 1510 x 590 x 1570 mm From a maintenance workshop Original price of base machine ~ 14.000 euros Special price upon requestFeatures:- Robust electro-hydraulic structural steel shear- Punching station, flat steel shear, . angle/profile steel shears, notching station- heavy-duty and stable welded construction- infinitely variable stroke adjustment- very compact design- support table at notching and punching stations- side support tables- 1x freely movable control panel - Emergency stop button- Oper ...

pressure: 50.0 tpunching cross-cut in cmm: 27.0 in 14.0 mm STround bar steel: 32 + 17 mmsquare edge steel: 30 + 18 mmL-beam: 100 x 10 mmthroat: 200 mmshear: flat material: 190 x 10 mmblade length: 200 mmstroke - stepless adjustable: 10 - 28 mmstroke: 14 - 28 H/mintotal power requirement: 4.0 kWweight: 900 kgrange L-W-H: 950 x 650 x 1730 mm from a maintenance workshop in good condition ()Equipment:- Compact electro-hydraulic combined structural steel shear with notching station with punching station flat bar shear angle steel shear round and square bar shear- Support table at the notching station- Support table at the punching station- Stripper at the punching station- 1x mobile foot switch- Assortment of various punches and dies- Original operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1200 mm Weight: 310 kg Auction-ID: A7-50799-110

I - beam section - flat steel: 100 x 15 (d 400) mmI-beam section - upend: 60 x 10 (d 500) mmL-beam: 50x50x6,0 (d 600) mmround material: 35.0 (d 500) mmbar material dia. max.: 70 x 1.5 (d 1500) mmsquare material: 50x50x3.0 (d 1400) mmbending speed: 8.5 U/minroll diam. toproll: 152 / 162 mmbore: 40.0 mmStroke length: 120 mmvoltage: 400 Vtotal power requirement: 1.1 kWweight: 470 kgrange L-W-H: 900 x 600 x 1100 mm Original price with accessories: approx. 10.000 eurosFeatures:- Two driven rollers (lower rollers)- Manual feed of the upper roller- Horizontal and vertical working positions- Shafts mounted with tapered roller bearings- Lateral, manually adjustable stop rollers- 1 set of standard rollersâsplit - 1 sets of tube rollers- 1 freely movable control unit- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 120 x 20 (d 750) mmI-beam section - upend: 60 x 10 (d800) mmL-beam: 50 x 5 (d 1200) mmbar material - diameter: 35.0 (d 800) mmbar material dia. max.: 70 x 3.0 (1200) mm: 50.0 mmdiameter of upper rolls: 155 mmdiameter of lower rolls: 155 mmStroke length: 150 mmRotating speeds: 9.0 U/mintotal power requirement: 1.3 kWweight: 305 kgrange L-W-H: 900 x 700 x 1500 mmFeatures:- Robust electric-motor-driven ring/profile bending machine- Machine base frame with rear storage shelf- Can be used in both horizontal and vertical orientations- Equipped with a wide variety of roller sets Split roller segments Pipe rollers - Electro-hydraulic feed of the upper roller- Manually adjustable side/alignment rollers- 1 freely movable control panel - Base frame with forklift pockets For easy transportThe data for this ad was created with ModulMWS - the software solution of LogoT ...

I - beam section - flat steel: 120 x 20 (d 750) mmI-beam section - upend: 60 x 10 (d800) mmL-beam: 50 x 5 (d 1200) mmbar material - diameter: 35.0 (d 800) mmbar material dia. max.: 70 x 3.0 (1200) mm: 50.0 mmdiameter of upper rolls: 155 mmdiameter of lower rolls: 155 mmStroke length: 150 mmRotating speeds: 9.0 U/mintotal power requirement: 1.3 kWweight: 305 kgrange L-W-H: 900 x 700 x 1500 mmFeatures:- Robust electric-motor-driven ring/profile bending machine- Machine base frame with rear storage shelf- Capable of horizontal and vertical operation- Equipped with a wide variety of roller sets Split roller segments Pipe rollers- Manual feed of the upper roller- Analog position indicator for the upper rollers (scale)- Manually adjustable side/aligning rollers- Base frame with forklift pockets For easy transportThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

: neu : 2025 : 090080 : prompt, Zwischenverkauf v : Türkei : 32100 €: 613.11 €: 1 : 3100 mm: 4 mm: 42 1/min: 1,5 °: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsball in the tabletape measuretilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6500 mmplate thickness: 3 mmback stop - adjustable: 1000 mmdimensions: 7300x2400x2300 mmWeight: 20000 kgEquipment/accessories:- 1 x set of knivesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

puncher: 55 tround bar steel: 40 mmsquare edge steel: 40 mmL-beam: 120 x 120 x 10 mmhole punching press: capacity (dia. x thick.): Ø 40 x 10 mmshear: flat material: 300 x 15 mmthroat: 250 mmwork stroke: 60 mmwork height max.: 1085 mmtotal power requirement: 4,0 kWweight: 1300 kgrange L-W-H: 2000 x 900 x 1800 mmEquipment:- Electro-hydraulic structural steel shears with 4 workstations Flat steel shears Structural steel shears Punch press Notching station- Driven by two hydraulic cylinders- Infinitely variable stroke adjustment- Support table at the hole-punching The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 6.0 mmcutting angle adjustment: 0.5 - 3.0 °down holder: 12 Stückno. of strokes: 8 - 14 Hub/minback stop - adjustable: 750 mmwork height max.: 770 mmControl: konv. total power requirement: 7.5 kWweight of the machine ca.: 3800 kg.range L-W-H: 2650 x 2100 x 1750 mm From a maintenance workshop Very good condition () Features- Robust, slide-guided electro-hydraulic panel shear- HACO control panelâfront left Easy operation directly at the cutting table Adjustment of cutting angle and backgauge Emergency stop button, latching - Electromotor-driven material stop/backgauge Fine adjustment with handwheel (front left)- Electro-hydraulic cutting angle adjustment- Manual cutting gap adjustment, from the front Eccentric adjustment - 1x long side stop - Front finger guard- 1x freely movable foot switch- Rear sheet metal chute- Operating instructionsThe data f ...

: neu : 090253 : November 2026, Zwischenve : Türkei : 21600 €: 414.72 €: 2550 mm: 2.5 mm: 35 1/min: 750 mm: 3 kW: 2 Stk.: 850 mm: 400 mm: 2860 mm: 1350 mm: 1200 mm: 1500 kgMotorized back gauge 750 mmPneumatic sheet supportHolddown with rubberMoveable foot switchSquaring arm2 supporting armsPhotocell-protection on the back sideUser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

 The FARROS BSA600 – KS1200 is a high-quality Swiss-engineered column and boom grinding system, specially developed for grinding, weld preparation, back gouging and surface finishing of large and heavy steel components.FARROS is a well-established Swiss manufacturer with decades of experience in industrial grinding technology. FARROS machines are internationally recognised for their robust construction, precision, reliability and long service life, even under demanding industrial production conditions.The BSA600 – KS1200 is particularly suitable for manufacturers of pressure vessels, boilers, large-diameter pipes, wind turbine towers, offshore structures, storage tanks and heavy welded steel constructions.The KS1200 grinding head is designed for demanding applications such as longitudinal and circumferential weld grinding, removal of weld reinforcement, back gouging, weld seam prepa ...

- Ram table size 1500 x 1600 mm- Lower Table 2200 x 2200 mm- Max. die height table to table 1600 mm

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-38

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-37

: neu : 2026 : 090203 : prompt, Zwischenverkauf v : Türkei : 3810 €: 1 : 1020 mm: 1.5 mm: 500 mm: 1950 mm: 1000 mm: 1150 mm: 420 kgwelded steel constructionwith manual hold down unitback gauge adjustable by handwheelusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090204 : prompt, Zwischenverkauf v : Türkei : 4290 €: 1 : 1250 mm: 1.5 mm: 500 mm: 2250 mm: 1000 mm: 1150 mm: 460 kgDEMO MACHINE - MINT CONDITIONwelded steel constructionwith manual hold down unitback gauge adjustable by handwheelusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3080 mmplate thickness: 16.0 mmthickness at Niro-steel: 12.0 mmcutting angle: 0.5 - 2.5 °no. of strokes: 7 - 12 Hub/minback stop - adjustable: max. 1000 mmtraversing speed: 200 mm/sekwork height max.: 840 mmdown holder: 14 StückColumn width: 3420 mmthroat: 350 mmControl: D-Touch 7 oil volume: 450 lengine output: 45.0 kWvoltage: 400 Vweight: 18150 kgrange L-W-H: 4130 x 2210 x 2570 mm Good / well-maintained condition () New price ~ €120.000 Special price upon requestFeatures:- Robust electro-hydraulic sheet metal shear (guided)- CNC control unit D-Touch 7 (touchscreen) Anti-reflective robust 7 color touchscreen control panel Easy positioning to the desired size Positioning accuracy 0.1 mm Unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target values Backgauge retraction function Cutting length control via adju ...

sheet width: 3100 mmplate thickness: 6.35 mmthickness at Niro-steel: 4.00 mmcutting angle: 0.5 - 2.5 °cutting gap adjustment: 0.05 - 0.8 mmno. of strokes: 12 - 50 Hub/minback stop - adjustable: 1000 mmControl: ELGO TYP 85 oil volume: 120 ltr.engine output: 13.0 kWweight: 6300 kg.range L-W-H: 3950 x 1950 x 1680 mm very well-maintained condition ()Equipment:- Electro-hydraulic guillotine shear with guided blade movement- ELGO NC Type 85 control unit Front control panel, swiveling (front left)- Electro-hydraulic cutting angle adjustment- Electro-hydraulic cutting gap adjustment- NC motorized backgauge With recirculating ball screws- 1x side gauge 2,000 mm ... with T-slot + mm scale- 2x front support arms 1,000 mm ... with mm scale- Recessed grips in the support table- Front finger guard- 1x movable foot pedal- Operating manualThe data for this ad was created with ModulMWS - the software so ...

sheet width: 2050 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 220 mmside roll diameter: ~ 170 mmdiameter of lower rolls: ~ 190 mmbending speed: ca. 2.0 + 5.0 m/minControl: ELAP LYNX oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 5.5 kWweight: 5000 kgrange L-W-H: 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on requestEquipment:- Robust electro-hydraulic 4-roll plate bending machine- 4-roll design offers a wide range of bending and rolling capabilities- MG NC control unit ELAP LYNX Operation – control of all rolls and machine axes Digital position display Manual operation via joysticks Movable control panel- Two central rolls driven directly by hydraulic motors- Conical rolling possible via roll tilting- Side roll parallelism maintained via torsion shafts- Pre-bending on both ends- Diameters up ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16600 €: 318.72 €: 1050 mm: 6 mm: 30 1/min: 2.3 °: 750 mm: 7,5 kW: 800 mm: 530 mm: 1355 mm: 1720 mm: 1630 mm: 1230 mm: 2000 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 4 cutting edges on the lower blade1000 mm squaring arm with scale, T-slot, and flip stop2 support armsMechanical downholderManual cutting gap adjustment on the frontBalls in the tableCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 25000 €: 480 €: 2050 mm: 6 mm: 30 1/min: 2.3 °: 750 mm: 7.5 kW: 800 mm: 530 mm: 2355 mm: 2720 mm: 1630 mm: 1230 mm: 3200 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 4 cutting edges on the lower blade1000 mm squaring arm with scale, T-slot, and flip stop2 support armsMechanical downholderManual cutting gap adjustment on the frontBalls in the tableCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 19800 €: 380.16 €: 1550 mm: 6 mm: 30 1/min: 2.3 °: 750 mm: 7,5 kW: 800 mm: 530 mm: 1855 mm: 2220 mm: 1630 mm: 1230 mm: 2900 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 4 cutting edges on the lower blade1000 mm squaring arm with scale, T-slot, and flip stop2 support armsMechanical downholderManual cutting gap adjustment on the frontBalls in the tableCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.