trabalho de chapa metálica usadas para venda (3,183)

tube diameter: 6 - 42 mmwall strength: 3 mmbending radius min.: 180 mmbending radius max.: 5 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mEquipment:Saw unitNotching unitDeburring unit for internal and external edgesFlaring unit / flaring function (necking / expanding)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 620 mmstroke: 0-100 mmhole diameter in sheet thickness: 40 in 20 mmno. of strokes: 49 Hub/minControl: total power requirement: 15 kWweight of the machine ca.: 3.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 3,0 mmdistance between columns: 2550 mmtrue cutting angle adjustable: - back stop - adjustable: max. 510 mmcutting gap adjustment: - mmtotal power requirement: kWweight of the machine ca.: 1,8 tdimensions: 3,3 x 1,4 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mmplate thickness: 3,0 mmdistance between columns: 1050 mmdiameter of upper rolls: 90 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,47 tdimensions of the machine ca.: 1,7 x 0,8 x 1,35 mmSheet metal bending machine with custom dimensions:- Capacity 1050 x 3.0 mm- Digital display- Hardened rollers- Conical bending- Swiveling top roller- Brake motor- Safety device: Emergency stop cord- Documentation in English- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting dimensions max.: 600 x 1000 mmplate thickness: max. 3 mmcutting angle: 1,5 °side stop electrical adjustable: 0 - 1010 mmrear stop electrical adjustable: 0 - 610 mmno. of strokes: 60 Hub/mintotal power requirement: 14 kWweight of the machine ca.: 8,7 tdimensions of machine L x W x H: 2,5 x 2,18 x 2,3 mAccessories: sheet metal stacking device on railsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1350 mmplate thickness: 4.0 mmthickness at Niro-steel: 2.0 mmno. of strokes: max. 35 Hub/mincutting angle: 2.0 Gradtable height: 945 mmdistance between columns: 1361 mmControl: CIDAN / SIEMENS engine output: 5.5 kWweight of the machine ca.: 1400 kgrange L-W-H: 2200 x 2000 x 1550 mmFeatures:- robust / motorized swing cut guillotine shears- unbreakable and torsion-free welded steel construction- compact and clear machine construction- NC electro-motorized backgauge, with digital display Target / actual value stop value input stepless adjustment over the entire travel range- 1x hold-down bar- 1x material side stop- recessed grips in the front support table- Manual cutting gap adjustment from the front- Rear sheet holding device for thin sheets- 1x freely movable foot switch- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of Lo ...

sheet width: 3355 mmplate thickness: 63,5 mmroll diameter: 686 mmvoltage: 400 Vtotal power requirement: 150 HPweight of the machine ca.: 95 tdimensions of the machine ca.: 62 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2520 mmplate thickness: 2.50 mm STthickness at Niro-steel: 1.50 mmupper clamping bar adjustment: 160 mmadjustment speed: 100 mm/secAdjustment folding beam: 80.0 mmBending speed: ca. 120 Grad/seccompressed air: 6.0 barwork height max.: 869 mmcontrol: POS 2000 voltage: 400 Vtotal power requirement: 7.2 kWweight: 3430 kg Current new price ~ 100.000 euros From a maintenance workshop With very good equipment ()Equipment:- CNC electric motor-driven universal swivel bending machine High-precision mechanics with modern control technology For individual and series production Robust high-speed machine with high axis speeds Torsion-free welded construction - Rotatable upper beam / as automatic tool change system With 2x tool stations (sharp and goose foot bending rail) Reduces set-up and idle times Eliminates time-consuming tool changes and adjustments- SCHRÖDER CNC control model POS ...

punching force max.: 50 tthroat: 510 mmstroke: 32 mmstroke - stepless adjustable: 10 - 32 mmno. of strokes: 35 bei 10 mm Hub/minWorking height: 1070 mmdaylight: 350 mmtable width: 255 mmdimensions: ca. 1080 x 650 x 1680 mmmaterial layer: 630 X 535 weight: ca. 1400 kgScraper, height-adjustable and removable, with interchangeable plateHydraulic low-pressure finder for foot switch operationTwo-stage foot switch and electrical controlsIntegrated hydraulic unitWith punching saddle for dies no. 3 and 4, up to Ø 39.5 mmQuick-change device for punches 3 and 6 up to Ø 39.5 mmPeddinghaus blue serieswith material support table no. 513, dimensions 630 x 535 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4000 mmplate thickness: 30 / 35 mmpre-bending: 30 mmdiameter of upper rolls: 570 mmside roll diameter: 450 mmdiameter of lower rolls: 540 mmbending speed: 4 m/minmin. bending diameter: 650 mmtotal power requirement: 60 kWweight of the machine ca.: 52 todimensions of the machine ca.: - mThe machine was overhauled in 2022Equipment:- Hydraulic 4-roller round bending machine- Roll material: 61 MnCrMo 43- Driven rolls: 2 Top-and bottom roll-- Drive: over 2 hydro motors direct flanged-- Adjustment speed bottom roll: 0-200 mm/min-- Adjustment speed side rolls: 0-700 mm/min- Speed compensation between top-and bottom roll: automatic- Operation of the tilting bearing: hydraulic- Tilting of the top roll: hydraulic- Bearing block: hydraulic- Indicator device of roll position: digitalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 4,5 mmpre-bending: 4,0 mmmin. dia.: 210 mmroll diameter: 140 mmweight of the machine ca.: 1530 kgdimensions of the machine ca.: 3220x1200x900 mmStandard features:- Central rollers via electric motor, planetary reduction gear andGear drive driven- Swivel top roller- Main engine with brake device- Conical bending device- Mobile controller and foot pedal- CE mark / Declaration of ConformityAdditional equipment:- motorized rear roller adjustment- Digital display for back roller- induction hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 0400 mmcoil weight: 1,50 tmaterial thickness: mmnomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mmrange of expansion ca.: 460 - 530 mmcoil outside - diam. ca.: 1500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: : : total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1500 mmworkpiece width - max.: 0,5 - 50 mmdimensions: 3300 x 1500 x 1800 mmfeed stepless: 0-4 m/mintotal power requirement: 20,4 kWweight of the machine ca.: 2800 kgThe SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts.The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant ...

working width: 1000 mmworkpiece width - max.: 0,5 - 50 mmsandingbelt width: -- mmweight of the machine ca.: 2,5 tWith the SBM-L 1000 G1S2, which works in the dry process, in alternating operationSteel, stainless steel and aluminum can be machined. She deburrs and roundsthe edges on the outer and inner contours of punched, laser, fine plasma orwater jet cut workpieces with a thickness of up to 50 mmon both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatterand slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottomUnderside, process the sheets on both sides at the same time. hereAll edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces andedit twice. All pairs of aggregates can be switched on/off separately de ...

Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm

sheet width: 3050 mmplate thickness: 6 mmdistance between columns: 3460 mmtable height: 800 mm0: 220 barcutting angle adjustment: 0,5x3 °down holder: 18 back stop - adjustable: 750 mmfront stop - adjustable: 1000 mmmain drive: 7,5 kWoil volume: 300 ltotal power requirement: 7,5 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,7x2,0x1,8 mcutting angle adjustment manuallyblade gap adjustment manuallyangle stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 3 mmdistance between columns: 2540 mmback stop - adjustable: 550 mmtotal power requirement: 5 kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 3,2 x 2,5x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mmblade length: 220 mmpressure: 0 tweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,6 x 1,7 x 1,6 mtotal power requirement: 2,5 kWCombined notching machine with a fixed 90° angle and an adjustablerectangular notching unit variable up to 200mm length x fixed 100mm width.There are 2 manually adjustable stops with a digital display.Axle length X900mm / Y300mmThere is no stamp holder / punch / hold-down device for this.These parts can be purchased from Boschert.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3-4 mmpressure: 0 tCutting length: 220 mmtable height: 900 mmquantity of oil: 35 lTable dimensions: 950 x 790 mmtotal power requirement: 4 kWweight of the machine ca.: 0,95 tdimensions of the machine ca.: 1,0 x 0,86 x 1,2 mFoot switch angle adjustment 30°-140° automatic cutting gap adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 220 kNsheet thickness - max.: 8 mmtravel -x axis: 2500 mmtravel -y axis: 1250 mm: 90 m/min: 60 m/min: 108 m/min: 360 °/secpunch diameter: 76,2 mmworkpiece weight: 150 kg: 0,01 mm bzw. 0,01° : 15 Stücktool changing time: 1,5 - 6,5 secweight of the machine ca.: 11.050 kgdimensions: 6400 x 5800 x 2100 mmWorking hours: 30.430 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate length: 1250 mmplate thickness: 8 mmPunching capacity: 220 kNNumber of working hours: 51.658 htotal power requirement: kWweight of the machine ca.: 11.050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Decoiler Decoiler with arm: 1,5 ton Material width: 350 mm Coil exterior diameter: 1.200 mm Expansion range: 370 - 430 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 250 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 6 mm Cross section: 1.200 mm Feeding speed: 20 m / min Required power: 18 kW

sheet width: 3200 mmplate thickness: 3.0 mm STthickness at Niro-steel: 2.0 mmOpening width / upper beam: 300 mmspeed: OW 40.0 mm/secBending beam adjustment: 80.0 mmspeed: BW 90.0 Grad/secwork height max.: 900 mmcontrol: MULTIBEND 5000 back stop - adjustable: 10 - 1550 mmaccuracy +/-: 0.1 mmair pressure: 5.0 barNumber of working hours: ca. 1.000 htotal power requirement: 2x 4.0 kWvoltage: 400 Vweight: 4400 kgrange L-W-H: 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours () good condition () Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=VP6emx4HTYM! Maximum flexibility when bending cassettes, boxes and profiles! High flexibility in bending part design! High productivity and throughput! Easy to useEquipment:- motorized universal swivel bending machine RAS 73.30 high-precision mechanics with  ...

sheet width: 1350 mm: 3 mmsheet thickness for stainless steel: 1,5 mmrear stop: 600 mmtotal power requirement: 3 kWweight of the machine ca.: 1150 kgdimensions: 2030 x 1940 x 1220 mmStandard equipment:- All-steel welded construction with static and dynamic frame rigidityframe rigidity- Direct drive with brake motor- Specially alloyed cutting blades- 750 mm motorized, digitally adjusted backgauge with ball screwsrecirculating ball screws- Manual blade gap adjustment system- Mechanical sheet clamping system with plastic base- Work table with insert plates- foot switch for single and repeat cutting cycles- 1 x squaring arm 1000 mm long with metric scale- 2 x 800 mm front material support arms- Front stop- Finger protection - front and rear covers- Rear light guards- CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engraving field: 120 x 120 mmtable-size: 250 x 250 mmworkpiece weight: max 50 kgControl: Fobagraf machine weight ab.: 1000 kgmachine frame made of welded steel constructionCross slide, hard stone design, table top with steel stop ironHeight-adjustable laser headQuality-switched ND: YAG laser head, lamp-pumped, 100 WDeflection unit mounted on the laser head (with standard lens)Z-axis with gearbox and servo driveServo axis control with X-, Y-, and Z-axesWater-cooledControl: Fobagraf user software packageOperating system: Windows 2000operating hours: 17.388 hmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1300 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1600 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3020 mmplate thickness: 5 mmdistance between columns: 3020 mmControl: Simatec OP7 stroke: 450 mmback stop - adjustable: 1000 mmwork height max.: 900 mmtotal power requirement: 22 kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: 4200 x 1600/2900 x 2000 mmFeatures:- Motorized backstop, 1000 mm- Motorized upper crossbar adjustment- Motorized lower crossbar adjustment- Side protection- Foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 4 mmwork height max.: 900 mm: 450 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4800 kgdimensions of the machine ca.: 4250 x 1500 x 1850 mmEquipment:- electric bending angle adjustment- electric upper beam adjustment- foot switch- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.