trabalho de chapa metálica usadas para venda (3,320)

Alimentação automática através do controlo E555 com sistema operativo Windows Para montagem em qualquer serra de cabeça única Elumatec (direita) Comprimento máximo de alimentação: 6.000 mm

Two similar Stanley riveting punches are available. Both machines include rivet dispensers ERF 23 and 23.1. An on-site inspection is possible.

chamfer lenght: 3055 mmVarious tooling:2: 118 x 65 x 3055 mm, dimensions see sketch, price = 550, -Tool No. 4:_ 60 x 40 mm with 4-fold opening: 30, 10, 9, 7 mm, length 3050 mm,Price €750.No. 3: Bottom rail for split bottom tools (matrices) 80 x 30 mm, opening40 mm, length 3050 mm, price €350Tool 70 x 70 mm with 4-fold opening: 10, 10, 20, 30 mm.2 pieces: 1500mm and 1300mm. Price €750. (Photo 5 & 6)Prices excl. VATMachine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1350 mmplate thickness: 3 mmcutting angle: 1° 30 no. of strokes: 35 Hub/mintable height: 850 mmrear stop: 450 weight of the machine ca.: 1200 kgdimensions: ca. 1700 x 1650 x 2000 mmmanually operated back gauge 450 mmworking lifght includedsafety gate includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate length: 1000 mmPunching capacity: 28 toweight of the machine ca.: 11.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 28 mmsquare edge steel: 25 mmL-beam: 80 x 8 mmnotching cap. mild steel max.: 7 mmcutting capacity of the vertical shear: 350 kNPunch power: 190 kNshear: flat material: 100 x 11 mmshear: length of knifes: ca. 175 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tdimensions of machine L x W x H: 1,0 x 0,5 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mmworkpiece length: -- mmwork piece width: 12 mmrange of angles: 30/45/22,5/37,5/50 °weight of the machine ca.: 30 kgChamfering system UZ12 ULTRALIGHT - KIT 30° + 45°Maximum bevel width 12 mm with automatic feedThe UZ12 ULTRALIGHT is one of the lightest automatic beveling machinesadvance in the market. Thanks to its compact size and light weightit is not only suitable for workshops, but also for assemblies. TheMachine is equipped with the automatic feed and therefore does thisWorking with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength),Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kitfor any given angl ...

weight max.: 10,0 tworkpiece diameter: 320 - 3200 mmtotal power requirement: 1,1 kWload capacity drive unit: max. 5000 kgload capacity rotating unit: max. 5000 kgweight of the machine ca.: 1,6 tThe self-adjusting D-HGZ roller blocks adapt to thedifferent diameters of your workpieces yourself. This role block isdesigned for particularly heavy work. Furthermore, thisRoller block suitable for thin-walled workpieces, as the four wheels per unitdeliver improved pressure distribution.Characteristics:- Top quality electronic components- Infinitely variable speed of the drive unit- Wheels fitted with solid rubber tires enclosed in onesteel construction- Heavy construction enables very high stability.- Good value for money allows for quick recoveryyour investment.- The D-HGZ range is supplied as a standard version and includes aRemote control with digital reading.Accesories:- Double foot pedal (s ...

x-travel: 4000 mmy-travel: 2000 mmz-travel: mm: 4000 bartotal power requirement: 35 kWweight of the machine ca.: tdimensions of the machine ca.: mMicroStep CNC water jet cutting system AquaCut-W 4001.20with the following features:• BFT high pressure pump ECOTRON ® 40.37• Desludging system (scraper conveyor) for a length of 4,000 mm• Water softening using water chemistry1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm}MicroStep® machine control with MML console and 24 touchscreenTwo LCD operating units on the portalLaser pointer with automatic offset transmissioniMSNC® module / expert systemiMSNC® module / assistant for service and maintenance workiMSNC® module / assistant for loading CNC programsiMSNC ® module / automatic calibration of mechanical scanningiMSNC® module / management of cutting programs (MRP}iMSNC® module / EcolnfoiMSNC® module / machine ...

pressure: 28 tstroke: 180 mmtable-size: 300 x 550 mmdiameter of piston: 130 mmwork speed: min. 2 m/secwork speed: max. 9,8 m/secreturn speed: 20 mm/secMax. pressure: 200 barweight of the machine ca.: 0,65 ttotal power requirement: 4 kWdimensions of the machine ca.: 1,15 x 0,75 x 1,1 m• The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, theTool holder and are installed in the holes and pin holes.• The HB-28 model is used for light bending measurements on the work tableequipped with an angle scale, and the press can also be equipped with toolsare supplied (for example block punching) that are placed on the tool holderCan be assembled, as well as to ...

round bar steel: 45 mmsquare edge steel: 40 mmL-beam: 120 x 13 mmflat steel: 500 x 12 mmpunching pressure: 60 tthroat: 510 mm: 500 x 12 oder 400 x 16 mmpunch diameter: 27 in 17 mmpunch diameter: 39 in 12 mmoil volume: 80 ltotal power requirement: 7,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 1,8 x 0,9 x 1,8 mHydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm².Electric 380 voltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 28 mmwall strength: 2 mmbending radius min.: 90 °Control: 3D TubeSoft Slim total power requirement: 3,5 kWweight of the machine ca.: - kgdimensions of the machine ca.: - mmDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5,0 tworkpiece diameter: 250 - 2500 mmtotal power requirement: 0,75 kWload capacity drive unit: max. 2500 kgload capacity rotating unit: max. 2500 kgweight of the machine ca.: 0,9 tThe self-adjusting D-HGZ roller blocks adapt to the differentDiameters of your workpieces yourself. This roller block is for specialdesigned for heavy-duty activities. Furthermore, this roller block is forSuitable for thin-walled workpieces, as the four wheels per unit are an improvedSupply pressure distribution. || Features: | - Electronic components ofTop quality | - Infinitely adjustable speed of the drive unit | -Wheels fitted with solid rubber tires enclosed in oneSteel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recoveryYour investment. | - The D-HGZ series is supplied as a standard version andincludes a remote control ...

sheet width: 3050 mmplate thickness: 6,0 mmdistance between columns: 3000 mmcutting angle: 0,5 - 3 °no. of strokes: 9 / 14 Hub/mindown holder: 18 total power requirement: 10 kWweight of the machine ca.: 4800 kgdimensions of the machine ca.: 3750 x 1600 x 1650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

largura da folha: 2500 mmespessura da placa: 3 mmdistância entre colunas: 2540 mmpotência total necessária: 9 kWpeso da máquina ca.: 5,5 tdimensões da máquina ca.: 3,5 x 3,5 x 2 mNo. 5120Máquina de dobra giratória FASTI 212Área de trabalho: 2500 x 3Suporte de folha atrás da máquinaNecessidade de espaço aprox. 4 x 4 (2) x 2 mPeso aprox. 5,7 toneladas

diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 20 mmspeeds: 2850 U/minrange of angles: 0 - 60 (stufenlos) °weight of the machine ca.: 19,5 kgMaximum chamfer width 20 mm + face machiningDesigned for chamfering and deburring straight edges, for theso-called FACING - removing an unwanted layer of material on theFront side of the workpiece, which is created, for example, by flame cutting a sheet metal.Specially developed for the production of visible chamfers andweld preparations. Powerful electric drive for extremeCharges. High performance motor stepless adjustment of the working angle in the range of 0° - 60° FACING - Edge processing at an angle of 0° to remove unwanted onesLayers of material after flame cutting The unique mechanical scale to adjust the bevel width for higherprecision A very compact and ergonomic design for high work productivity Circumferential protective ...

largura da folha: 1015 mmcomprimento da placa: 1015 mmespessura da placa: 6,0 mmCapacidade de perfuração: 25 tdiâmetro da perfuração: 88,9 mmnecessidade de potência total: 16 kWpeso da máquina ca.: 12000 kgdimensões da máquina ca.: 4000 x 2320 x 2300 mm

plate thickness: 6 mmpressure: 12 tcutting range: Breite x Länge 200 mmno. of strokes: 15 Hub/mincutting angle: 30 - 140 °total power requirement: 4 kWweight of the machine ca.: 1,02 tdimensions of the machine ca.: 1065 x 900 x 1210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 50 mmsquare edge steel: 45 mmL-beam: 150 x 14 mmtotal power requirement: 4 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,3 x 1 x 2,1 mNo. 34185-fold combined profile steel shears with flat steel shearsPEDDINGHAUS 210 Super 16pressure capacity 80 toRound steel 50 mmSquare steel 45 mmangle steel 150 x 14 mmPunching up to 90 mm diameter5.5 HPSpace requirement 2.30 x 1.0 x 2.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

peso máx.: 5,0 tdiâmetro da peça: 100 - 2500 mmpotência total necessária: 2 x 0,37 kWcapacidade de carga unidade de acionamento: máx. 2500 kgcapacidade de carga unidade rotativa: máx. 2500 kgvelocidade de viragem da mesa: 100 - 1000 mm/mindiâmetro do volante: 250 x 140 mmpeso da máquina ca.: 0,9 tPedal duplo do pé (start-stop / esquerda-direita)Incl. controle remoto (no cabo)

pressão: 32 tcurso: 250 mmtamanho da mesa: 500 x 760 mmaltura máxima de trabalho: 925 mmvelocidade de flexão: máx. 25 mm/segcapacidade do tanque: 80 lPotência de pressão: 320 barPotência total necessária: 5,5 kWpeso da máquina ca.: 0,8 tdimensões da máquina ca.: 1,3 x 0,5 x 1,3 mmáx.altura de flexão: 200 mmCapacidade de corte máx. (St): 150 x 14Capacidade de puncionamento máx. (St) 35Altura de guia: 200 mm

table width: 3000 mmtable length: 1500 mmburner heads: 1 Plasma cutting system HEZINGER PlasmaLine EPJ / ECKERTwith extraction system PFC-4 Plus 4kW F3800The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 140 x 140 x 13 mmI-beam section - upend: 120 x 120 x 13 mmL-beam: 130 x 130 x 12 mmround bar steel: 85 mmbending capacity - flat iron: 125 25 mmflat steel: 65 x 65 mmincluding various rollers:Pipe Ø:219 mm (tool/roller Ø 535 mm)140 mm (tool/roller Ø 420 mm)273 mm (tool/roller Ø 520 mm)203mm168.3 mm (tool/roller Ø 500 mm)75 mm (tool/roller Ø 400 mm)49 mm (tool/roller Ø 420 mm)48.3 mm (tool/roller Ø 420 mm)22.5 mm (tool/roller Ø 420 mm)32/32.5 mm (tool/roller Ø 420 mm)60 mm (tool/roller Ø 420 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 3 mmspeeds: 3600 U/minrange of angles: 30 - 60 (stufenlos) °weight of the machine ca.: 31 kgdimensions of the machine ca.: 530 x 420 x 410 mmMaximum bevel width of 3 mm - Mechanically adjustable bevel angleDesigned for deburring and chamfering steel parts and workpieces.Processing of different materials. Solid and stablemachine construction. Scale for setting the processing depth Security cover Adjustable processing angle For steel, stainless steel, aluminum and other materials Precise, massive and overlong mechanical guide- Number of indexable inserts: 5 pieces (four-sided)- Feed: manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1050 mm: 5,5 mm: 5,0 mmroll diameter: 130 / 195 mm: 2,2 kW: 1050 kg: 2150 x 900 x 1200 mm- 2 central rollers driven by an electric motor- Swing-out upper beam- Conical bending device- separate control panel- self-braking main motor- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

espessura da placa: 1,2 mmdiâmetro do rolo: 62 mmgarganta: 100 mmpeso da máquina ca.: 50 kgdimensões da máquina ca.: 560 x 220 x 500 mm

diameter: -- mmworkpiece length: -- mmwork piece width: 18 mmrange of angles: 15° - 50° °weight of the machine ca.: 110 kgChamfering system UZ18 HARDWORKERMaximum bevel width 18 mm with automatic feedThe UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on-site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient.For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can be easily a ...

pressão: 26 tperfuração corte transversal em cmm: 80 x 2,5 curso: - mmpotência total requisito: 1,5 kWpeso da máquina ca.: 3 tdimensões da máquina ca.: 3 x 3 x 2,5 mNo. 1096:Revolver hole punch 26 to.EDEL, tipo SMO 26/660/12 construído em 1973 com profundidade da garganta 660 mmÁrea de trabalho: diâmetro 80 x 2,5 mmPotência de acionamento: 1,5 kWAcessórios: carregadorde ferramentas de 12 estações Vários socos e matrizes

angular steel - leg outwards: -- mmdouble T-iron on the x-axis: -- mmU-iron on the x-axis: -- mm: 50 mm: 150 mmthroat: 120 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,36 tdimensions of the machine ca.: 1,1 x 0,8 x 1,4 mExhibition machine NEW, year of construction: 2021The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel.The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine.- Manual adjustment of the top roller with a handwheel- Vertical and horizontal work possibility- 3 driven rollers- Supplied with a standard roller set- Foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacidade de corte: - mmgarganta: - mmdiâmetro em branco redondo máx.: 500 mmdiâmetro em branco redondo min.: ? mmrequisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: m