outras máquinas para trabalhar o metal usadas para venda (11,395)

Article: pickoff with shaftManufacturer: Schüttepickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GFpickoff shaft C26GF9S1gear WG-67Sholder B73GF1S1Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Sheet metal roller Working width max. 610 mm. Sheet thickness max. 1 mm. Diameter of the rollers 38 mm. Packaging dimensions 95 x 27 x 36 cm. Weight 40 kg. Condition: never used / new (5) Auction-ID: A7-46642-46

automatic switch plate1x saw unit with saw, head and saw valve 40/801x turning unit with turning valve 30/60 with flange9x units 30/60 with valve normal and flanges5x units 20/50 with valve normal and flanges1x oil distributor WK9; 1x bar feeder 4 meters; 1x chip conveyor VR500;1x hydraulic unit1 Knoll oil filterWithout collets and ejectors, without platform and without tool monitoring.supplied tooling may differ from the pictures.We can send you more pictures.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Automatic bar loading magazine for single spindle automatic lathe / short lathe, newTEST the new DB-EVO bar loader4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request)very high speeds even with profile materialManufacturer: Giovanni CucchiMachine type: Automatic bar loading magazine for single-spindle / short turningType: DB-EVODesign: Surface loading magazine or bundle loading magazinediameter range: 20-110mmDB-EVO at a glance:Scope of delivery and optionally orderable functions:- oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional- Monitoring and fault diagnosis (touch screen)- Surface magazine- Bundles and other variants possible- automatic loading of short bars- Trays for tools- low power consumption (start/stop function)- Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6.1 meter rod length  ...

Unaudited Auction-ID: A7-46327-171

Bar loading magazine for multi spindle automatic lathe, newManufacturer: Giovanni CucchiMachine type: Bar loading magazine for multi-spindleType: CMSP/CMSPFDesign: Side loader as surface loading magazine or bundle loading magazineCMSP / CMSPF at a glance:Proven technology - in use for decadesThe material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release.These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode.The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the ...

tool taper:ABS-100 VDI

Consisting of: various ISO 30 holders, Depo. Auction-ID: A1-45979-14

Centrifuge with water treatment - Factory No.: 22126799 - Machine ON: 5,144.65 h - Timer switch Drum diameter 382 mm Drum height 250 mm Capacity 40 kg Wall thickness of the drum 13 mm Drum speed 2850 rpm Flow rate 800 l/h Operating voltage 400 V Total power requirement 5.0 kW Machine weight approx. 500 kg Space requirement approx. 1.90 x 0.70 x 1.65 m Auction-ID: A7-46642-67

Erodiermaschine, gebrauchtBaujahr: 1989Bitte kontaktieren Sie uns für weitere Informationen und Bilder über mail(at)tar-mc.com oder www.tar-mc.com

various makes and measuring ranges, some of which are incomplete; for more details see photos of the nameplates Auction-ID: A7-46619-407

screw size:45 mminjection shot weight in Polysterol:149 g/PSclosing pressure:100 kN

4 pcs Lowest reading value 5 min more details see photos Auction-ID: A7-46619-189

Sheet metal roller for the vice. Maximum working width 300 mm. Maximum rolling capacity 2.5 mm. Diameter of the rollers 32 mm. Condition: never used / new (5) Auction-ID: A7-46642-240

2 gauge blocks, different makes and measuring ranges; for more details see photos of the nameplates Auction-ID: A7-46619-403

swing diameter:80 mmworkpiece length:450 mmweight of the machine ca.:3500 kg

The analyzer measures the deviations and displays them via a recorder. The EVTM device is used to measure gear parameters such as profile, flank line or pitch deviation. • It is mechanically applied to the gear wheel, and deviations are registered via electric displacement transducers (buttons). • The measurement results can then be evaluated or recorded via the first device (the recorder/analyzer). The EVRM is used in conjunction with the other two devices to process vibrations (acceleration/speed/displacement) and output them as an analog signal. It is used for: • Vibration diagnosis on machines (bearings, imbalance, alignment) • Resonance measurements for workpieces / test benches • As an interface between sensor (accelerometer) and meter/recorder/oscilloscope It is sold unchecked from a company closure Auction-ID: A7-46327-1

table length:920 mmtable width:600 mmampere:13,2 Aweight of the machine ca.:6 tdimensions of the machine ca.:2,46 x 2,24 x 2,33 mX-axis:600 mmy-axis:400 mmZ-axis:260 mmmax. table load:1500 kgThe dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg.

measuring range X-axis:150-300 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:450 mmtool diameter: mmtool taper: SKcompressed air: bardimensions: mmachine weight ab.: kgclamping surface upper angle: Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer

weight of the machine ca.:3 t

This sandblasting booth includes as standard: Front loader with two gas struts. Blasting gun 4-piece nozzle set Set of gloves Lighting Set of protective films Foot pedal. Pressure regulators Extraction with microfilter Original packaging Internal dimensions 1170 x 580 x 580 mm Operating pressure 2.2 - 5.5 bar Dimensions L x W x H 1.22 x 0.93 x 1.7 m Machine weight approx. 0.15 t The system is delivered in black Condition: never used / new (5) Auction-ID: A7-46642-37

centre height:500 mmcentre distance:2000 mmcontrol:CNC Grundig Numerik total power requirement:400 V, 50 Hz, 22,5 kWweight of the machine ca.:3300 kgdimensions of the machine ca.:2500 x 4000 x 2400 mm

Measuring range: 0-150mm Auction-ID: A7-46619-408

Article: Rotary transfer machineManufacturer: PfiffnerType: Hydromat HB 32-45/16 CNCYob: 2013Electro-hydraulically controlled, fully automaticExtract from offer:Coolant system with chip conveyor and Knoll vacuum rotation filterHigh pressure pump 50 barSecond coolant ringWater cooler type 1600Collets type B32-45 UPControl: Siemens Sinumerik 840D - CNC / S7-PLC incl. modem (for teleservice)1 bar loading magazine type IEMCA: bundle loader (yob. 2011)1 Sawing unit: Saw blade D250mm2 Feed unit VE 26/80-HSK: Spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 322 Vertical support 26/80 with 36° angular position2 drilling head 26/80-HSK: HSK 321 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 404 Feed unit VE 36/100-HSK internal cooling: Spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive po ...

Collection by Appointment Only. This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-46452-2

Measuring range: 0- 600mm, serial number: 192-603, digital version Auction-ID: A7-46619-421

Wooden box with various machine tools and accessories, including cutters, gears, clamping equipment and various loose parts. Auction-ID: A1-45979-21

Electric backgauge; Max. power: 11.75kw ; Nominal capacity sheet thickness: 6.5mm ; max. working length 3050mm ; Voltage: 380V, 50Hz; Max. dimension of tools: 3160mm; max. mass of tools: 49.3 kg; for more details see photos of nameplate Auction-ID: A7-46619-250

Oil filterCapacity:3 x 120 l/min; 3 bar3 x 140 l/min; 15 bar

Auction-ID: A1-45979-9