prensas usadas para venda (1,718)

Slide size 385x350 mm Slide stroke 80 mm Max opening between table and slide 350 mm Worktop size 800x520 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-10

DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-4

Slide size 650x450 mm Slide stroke 20-140 mm Strokes per minute 40-80 Max mould height 400 mm Worktop size 1000x660 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-7

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 62500 €: 1181.25 €: 63 to: 750 mm: 500 mm: 170 mm: 4 - 102 mm: 54 1/min: 490x325 mm: 90 mm: 270 mm: 440 mm: 7.5 kW: 1800 mm: 1150 mm: 2750 mm: 4100 kg8-fold ram guidefront protection by light guardmanual stroke adjustmentram adjustment witch ratchetdrive over gearcombined clutch brake unit with pneumatic controlfix tablesingle and continuous strokefoot pedal and 2 hand controlmech. overload safety deviceautomatic central lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10000 €: 193 €: 100 to: horizontal verschiebbar : 300 mm: 1570 mm: 220x160 mm: 5 mm/s: 10 mm/s: 2630 mm: 1000 mm: 2430 mm: 1600 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure 100 t Stroke 220 mm Clear width between uprights 1190 mm Installation height 700 mm Cylinder diameter 190 mm Piston diameter 120 mm Table surface 1600 x 800 mm Machine weight approx. 1.3 t Dimensions approx. 1.9 x 1.4 x 2.0 m Auction-ID: A7-46460-478

: neu : 2024 : 7307 : prompt, Zwischenverkauf v : Italien : 11400 €: 197.76 €: 1 : 10300 €: 100 to: horizontal verschiebbar : 500 mm: 900 mm: 1050 mm: 25 mm/s: 2 mm/s: 2 kW: 1900 mm: 1000 mm: 2400 mm: 1250 kg: 650 mmSTROKE 500 MM2 speedsmachine table can be liftet with chainscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 €: 1965.6 €: 125 to: 500 mm: 1200x700 mm: 600 mm: 115 mm/s: 7 mm/s: 70 mm/s: 15 kW: 2550 mm: 1500 mm: 2600 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Foot control / strip bender / opening 159x77cm Auction-ID: A3-43525-18410

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATS 585 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmFurnishing:- NC controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control ATS 560 Positioning of the backgauge (X axis) Depth setting positioning (Y1+Y2 axis) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, left front- electric back gauge (X axis) with 2 stop fingers, manually adjustable (R+Z axis)- System A tool holder - with cambered upper wedge- Split insert/bending tools- side protection grids- rear protection- free-moving double foot switch- Operation manualThe d ...

According to photos, weight estimated Auction-ID: A1-45666-39

pressure: 40 tthroat: 230 mmstroke: 4-100 mmtable surface area: 650x450 mmram surface: 420x220 mmram - range of adjustment: 85 mmhole in the table: 170x220 mmtable height: 800 mmno. of strokes: 60 Hub/mindayligth: 375 mmDimensions (HxWxD): 2800x1200x1900 mmweight of the machine ca.: 3,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: 300 mmstroke: 8-110 mmno. of strokes: 100 Hub/minram - range of adjustment: 75 mmtable surface area: 750x590 mmram surface: 540x400 mmhole in the table: 200x200 mmtable height: 780 mmtool hole in ram: Ø 40 mmtotal power requirement: 11 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 1200x1700x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

According to photos, weight estimated Auction-ID: A1-45666-38

According to photos, Auction-ID: A1-45666-16

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

According to photos, weight estimated Diameter 1400mm Auction-ID: A1-45666-32

Sold with 3 tool cabinets (2 x 50/100/190 cm and 1 x 90/100/190 cm) with contents. Auction-ID: A1-46437-189

pressure: 400 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcontrol: CYBELEC ModEva 10 S total power requirement: 47 kWweight of the machine ca.: 30.400 kgdimensions of the machine ca.: 6000x3000x3450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 46600 €: 890.06 €: 30 to: 200 mm: 500x380 mm: 700x450 mm: 400 mm: 54 mm/s: 18 mm/s: 90 mm/s: 7.5 kW: 1680 mm: 850 mm: 250 mm: 2950 kg2-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 78000 €: 1474.2 €: 85 to: 500 mm: 900x600 mm: 600 mm: 105 mm/s: 7 mm/s: 58 mm/s: 7.5 kW: 2250 mm: 1150 mm: 2400 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sold with letter presage kit. Auction-ID: A1-46437-85

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 €: 3109.05 €: 260 to: 500 mm: 1400x1000 mm: 600 mm: 75 mm/s: 5 mm/s: 60 mm/s: 22 kW: 2800 mm: 1650 mm: 2750 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.