prensas usadas para venda (1,722)

Força de compressão: 63t, pressão de funcionamento: 160bar, velocidade de pressão para baixo/para cima: 200mm/400mm/s, curso do carneiro: 500mm, profundidade da garganta: 360mm, distância máxima da mesa RAM: 800mm, peso: aprox. 4200kg. É possível uma inspeção no local.

Está disponível uma prensa de rolos (prensa de briquetagem) Köppern Maco. Capacidade de produção: 10 MT/h, diâmetro do rolo: 720mm, largura do rolo: 315mm, formas de briquetagem: segmentos aparafusados, tipo de motor: motor elétrico Siemens, potência do motor: 190kW, tipo de caixa de velocidades: engrenagem de esporão, dimensões da máquina X / Y: aprox. 5000mm/5000mm, peso: aprox. 15000kg, controle: Siemens S7-300 Simatic. Incluindo dois novos conjuntos de segmentos e um conjunto de segmentos instalados. Documentação disponível. É possível uma inspeção no local.

Está disponível uma prensa para oficinas Sahinler. Pressão da prensa: 150t, pressão máxima: 244bar, largura de trabalho: 1520mm, curso do pistão: 300mm, dimensões do carneiro X/Y: 200mm/1520mm, através do furo: 100mm, dimensões da mesa X/Y: 600mm/1520mm, altura máxima de instalação: 610mm. Velocidade de avanço: 9mm/s, velocidade de retração: 10mm/s, velocidade de trabalho: 5mm/s, potência de acionamento: 11kW. Dimensões da máquina X/Y/Z: aprox. 2500mm/1000mm/2400mm, peso: aprox. 3000kg. Documentação disponível. É possível uma inspeção no local.

Força de compressão: 1000kN/100t, curso do carneiro: 200mm, pressão máxima de funcionamento: 290bar, controle: DNC70, distância de segurança: 166mm, tempo de deslocamento: 104ms, distância de deslocamento: 7mm.

Força de compressão: 2000kN, largura de trabalho: 3100mm, passagem da coluna: 3240mm, curso máximo: 400mm, profundidade da garganta: 250mm, altura máxima de instalação: 965mm, eixos NC: 11, volume hidráulico: 550l, dimensões da máquina X/Y: aprox. 4400mm/3400mm, peso: aprox. 16600kg, controle: Cyb-Tech Infinitron. Documentação disponível. É possível uma inspeção no local.

Uma antiga prensa excêntrica Künstner & Hampel está disponível. Capacidade de pressão: 25 toneladas, requisito de potência: 2,5 HP. A inspeção no local é possível.

Altura de instalação: 408mm, pressão máxima de trabalho: 315bar, força máxima de compressão pistão superior/pistão inferior: 630kN/100kN, força de retração do pistão superior: 71kN, curso máximo pistão superior/pistão inferior: 160mm/80mm, overtravel: 26mm, tempo de deslocamento: 106ms, distância de segurança: 169mm, capacidade de óleo hidráulico: 250l, peso: aprox. 3700kg, horas de funcionamento: 9283h. Documentação disponível. É possível uma inspeção no local.

A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

pressão: 10 tdistância entre colunas: 260 mmdayligth: 210 mmárea da superfície da tabela: 275 x 260 mm

Machining center and extruded profile plant for car sill production, consisting of:, Processing machines:, - Anger machine SP2-X2000 (machine number AA100264-11), - Anger machine SP2-X2000 (machine number AA100264-12), - 2x coolant treatment, Assembly of components (robot cell for sills):, - Robot 1 KUKA KR120 R3200 PA, - Gripper for robot 1, - Labeling station, - Robot 2 KUKA KR120 R3500, - Gripper for robot 2, - Robot/machining center interface, - Cleaning unit for components, - Assembly machine 2 lanes, - Robots 3 and 4 for handling, - Drawer system with parts inserts, - Screwing station, - Adhesive application station, - Platform, - Robot 5, - Gripper for robot 5, - Pallet parking space, - Safety enclosure, - Electrical control and integration, Further information on request.

pressure: 40 tthroat: 225 mmstroke: mmtotal power requirement: 4,7 kWweight of the machine ca.: 3,45 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tthroat: 250 mmstroke: 1280 mmtotal power requirement: 6,5 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 2050 mmtotal power requirement: 11 kWweight of the machine ca.: 5,9 tdimensions of the machine ca.: m- ram adjustment: 150 mm- distance ram to table: 400 mm- stroke: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1250 tchamfer lenght: 15000 mmdistance between columns: 10160 mmControl: CNC 10 Grafik total power requirement: kWweight of the machine ca.: 230 tdimensions of the machine ca.: 17000 x 5400 x 5900 m- Pressure: 1.250t- Bending length:15.000mm- Control: CNC 10 graphics- No. of axes axes: min. 10- Frame width: 10.160mm- Projection: 770mm- Table length: 15,000mm- Dimensions: 17,000mm x 5,400mm x 5,900mm- Mass: approx. 230tEquipment- Crowning device- CNC 10 control with graphics- Hydr. clamping of the upper tools- Multi-man operation- Increased speeds- Automatic height-adjustable rear sheet stop- die cushion device- Horn length 2,200 mm on both sidesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tpiston stroke: 400 mmdiameter of piston: 300 / 185 mmthroat: 225 mmtable-size: 1150 x 350 mmspeed of pressing: 166 mm/secpre-running speed: 75 mm/secreturn speed: 208 mm/secweight: 26 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- speed of pressing: 16 ...6 mm / sec- advance: 75 mm / sec- rapid return: 208 mm / sec- distance between plunger with ram and locators: 320 mm- distance between locators of piston and table: 50 ... 888 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 3000 tchamfer lenght: 14000 mmdistance between columns: 10500 mmControl: CYBELECCNC 7000 m. Grafik table width: 1000 mmstroke: 1300 mmmin./max.distance between table and ram: 1800 mmcontrolled axis: Y1, Y2, X1, X2 total power requirement: kWweight of the machine ca.: mind. 465 tdimensions of the machine ca.: 14600 x 4200 x 7200 mm- throat depth: 700 mm- controlled axes: Y1, Y2, X1, X2- Dimensions (length x width x height):- Foundation depth for table: 3400 mm- Foundation depth for stand: 1700 mm- Dimensions of the individual components for transportation:- Table: 14020 x 4270 x 910 mm, weight approx. 125 tons- Top section: 15240 x 4060 x 910 mm, weight approx. 120 tons- 2 side stands: 7620 x 3550 x 1530 mm, weight approx. 90 tons each- Lower tool: 15240 x 1220 x 1220 mm, weight approx. 40 tons- 2 pcs. Container 40” for cylinder, electrics and various attachments- Control sys ...

pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmtable width: 220 mmcolumn arm: 280 mmdayligth: 440 mmwork stroke: max. 250 mmtotal power requirement: 22 kWweight of the machine ca.: 13 t- Hubgeschw. / speed of stroke: abwärts: down, 90 mm/s- Press down 11 mm/s- Aufw. / upward: 90 mm/s- Spez/specif.: 2-Hand/Fuss-Bedienung / 2 –hand foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

nominal power: 63 tstroke rate in continuous stroke: 90 minforce: 2200 NmTorque: 12500 NmLabour performance: 5,5 kWsheet thickness - max.: 6,3 / 3,2 mmcutting surface: 1600 mm²distance between columns: 320 mmthroat: 315 mmmin. ram stroke: 8 mmmax. ram stroke: 120 mmram adjustment: 70 mmram surface: 400 x 500 mmtool hole in ram: 40 mmtool shank hole (depth x diameter): 92 mmT-slots: 2 Stktotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tthroat: 360 mmTable dimensions: 1250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tstroke: 380 mmtable surface area: 1740 x 996 mmpressure: 258 barajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/secdayligth: 700 mmtable height: 720 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1685 kg- Manually movable portal- Movable cylinder manually (left - right)- Cylinder extension up to the table- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Joystick to move the piston up / down- Hand pump for precision workThese straightening presses are equipped with a movable cylinder (on the side) and aMovable frame (longitudinal-running) equipped to allow easy access to allallow points of the surface. The design of this portal pressmakes it possible to put heavy material on the table with a crane and thatSlide the portal over the material at the beginning of the pressing process.The quality of these hydraulic s ...

pressure: 63 tpassage width: 1350 mmstroke: 300 mmtotal power requirement: 16 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 2,0 x 1,8 x 3,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 500 tlargura de passagem: 750 mmcurso: 120 mmrequisito de potência total: 57 kWpeso da máquina ca.: 16 tdimensões da máquina ca.: m

pressure: 10 tdistance between columns: 500 mmstroke: 200 mmtotal power requirement: 10 kWweight of the machine ca.: 4.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 125 tdistância entre colunas: 1050 mmcurso: 250 mmnecessidade de potência total: 40 kWpeso da máquina ca.: 8,5 tdimensões da máquina ca.: m

pressure: 34,0 kNstroke: 40 mmthroat: 130 mmWorking height from to: 80 - 240 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 80 Kgdimensions: 375 x 200 mmToggle pneumatic pressesincl. working height fine adjustment via bevel gear with lateral crankcomfortable and easily adjustable.Toggle lever pneumatic presses are to be used when the maximumpressure is required shortly before the end of the stroke, e.g. when assembling, punching,embossing, caulking, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tthroat: 360 mmstroke: 560 mmtotal power requirement: 33 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: 2000x2400x3650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 10 tcurso: 200 mmtamanho da mesa: 450 x 450 mmvelocidade de trabalho:: 10 mm / seg.altura máxima de trabalho: 940 mmaltura máxima da peça de ferramentas: 150 mmnecessidade de potência total: 1,1 kW: 150 x 6 mmpeso: 0,4 tdimensões: 1,15 x 0,5 x 0,9 mmMáquina de dobra horizontal com:- Controle NC- Interruptor de pé duplo- Conjunto de ferramentas padrão

pressure: 200 tstroke: 400 mmdaylight longitudinal/sideways: 1300 /450 mmdayligth: 900 mmtank capacity: 75 lliter capacity: 22 lfeed down: 6,9 mm/secfeed up: 12,6 mm/secMotor output: 7,5 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,0 x 0,75 x 2,8 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tstroke: 400 mmtable surface area: 920 x 540 mmMotor output: 2,2 kWliter capacity: 9,0 ldayligth: 800 mmtank capacity: 31 ldaylight between the columns: 920 x 300 mmweight of the machine ca.: 0,725 tdimensions of the machine ca.: 1,45 x 0,85 x 2,45 mHand and Motor operated.Side-sliding cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 40 tNº de cursos: 500 Hub/minlargura da folha: mmNecessidade de potência total: 5,5 kWpeso da máquina ca.: tdimensões da máquina ca.: m