retificadoras usadas para venda (2,226)

charge load: 620 Liter: 1.700 mmtank diameter / tank height: 1.550 / 600 mm: 450 mmmotor capacity: 4,5 / 7,5 kWmotor speeds:: 900 / 1.485 U/minvoltage: 400 Vtotal power requirement: 8,5 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,00 x 1,70 x 1,50 mSoundproofing cover bracket: 3,30 x 0,60 x 0,40 mFinishing machine- Serial-No.: 36225 / 05- Machine ON: 6.469 h- Pneumatic separating flap- Timer- Pneumatic soundproof coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Volume do tanque de trabalho 200 l Volume utilizável 125 l Peça máxima (diagonal) 170 mm Área de rastreio 2190 cm² força centrífuga máxima 49.000 N Existem 2 elevadores disponíveis!

grinding length: 500 mmgrinding width: 200 mmworkpiece height: 290 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMachine from the German Federal Institute of Physics and Metrology- geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced- colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdownManual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kgWarranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at  ...

diâmetro da roda: 150 - 500 mmpotência total necessária: 3 kWpeso da máquina ca.: 350 kgdimensões da máquina ca.: 2,4 0,6 1,2 m

carga carga: 260 litros: 1.300 mmdiâmetro do tanque / altura do tanque: 1.150 / 500 mm: 300 mmcapacidade do motor: 1,5 / 3,0 kWvelocidades do motor:: 985 / 1.480 U/mintensão: 400 V peso da máquina ca.: 740 kgdimensões da máquina ca.: 1,50 x 1,30 x 1,25 mMáquina de acabamento- Nº de série: 15770 / 96-08- Máquina ON: 37.851 h- Temporizador

Ano de Marca: 1976 Última revisão da mecânica: 1988 Última revisão elétrica: 2011

internal diameter: 800 mmgrinding depth: 500 mmswing diameter: 850 mmtotal power requirement: kWweight of the machine ca.: 6,4 tdimensions of the machine ca.: mUsed internal cylindrical grinding machine with face grinding devicein special design with enlarged swing diameterand extended, hydraulic transverse movementReconstructed and modernized 1995 in the Glauchau manufacturer’s plant,put into operation 19961. TECHNICAL DATA1.1 Working areaGrinding diameter in the workpiece guardinternal grinding, min./max. mm 30/630(800)External grinding, max. mm 800Grinding depth, up to approx. mm 500Table stroke mm 800Workpiece diameter, max. mm 800Swing diameterin workpiece protection, max. mm 800Without workpiece protection, approx. mm 850Distance from workpiece spindle headto grinding spindle carrier, max. mm 1225Adjustment of the internal grinding deviceon the table, max. mm 5451.2 Workpiece h ...

diâmetro de afiação: 9999999 mmcurso: 9999999 mmgarganta: 9999999 mmrequisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: mUsado sem garantia

diâmetro de afiação: 9999999 mmcurso: 9999999 mmgarganta: 9999999 mmrequisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: mTreiber usado a partir de um controleNagel MSU2 Sem garantia

diâmetro de afiação: 9999999 mmcurso: 9999999 mmgarganta: 9999999 mmrequisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: mPainel usado de um NAGEL MSU2Sem garantia

comprimento de moagem: 2000 mmlargura de moagem: 600 mmaltura da peça: mmControlo: potência total necessária: 17 kWpeso da máquina ca.: 10 tdimensões da máquina ca.: m

rotary table dia.: . mmmax. dia. of grinding wheel: 300 mmwith manual ongoing: . 0manually feed: . 01,5 KWThe technical Data are manufacturer or operator information andtherefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mmmax. dia. of grinding wheel: 300 mmwith manual ongoing: . 0manually feed: . 01,5 KWThe technical Data are manufacturer or operator information andtherefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mmmax. dia. of grinding wheel: 260 mmwith manual ongoing: . 0manually feed: . 00,73 KWThe technical Data are manufacturer or operator information andtherefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

carga carga: 150 litros: 1.000 mmdiâmetro do tanque / altura do tanque: 920 / 480 mm: 210 mmtensão: 380 Vpeso da máquina ca.: 630 kgdimensões da máquina ca.: 1,10 x 1,50 x 1,30 m

CONTROLS  CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER)  Grinding wheel diameter: 750 mm  grinding width max. - throughfeed grinding: 180 mm  material thickness max. - throughfeed grindin: 30 mm  grinding width max. - plunge cut grinding: 300 mm  material thickness - plunge cut grinding: 80 mmGRINDING SPINDLE 1  drive power: 48 kWGRINDING SPINDLE 2  drive power: 48 kWCOMPONENT-FEEDER  Feeder Design: rotary Feeder   feeder velocity max.: 20 mm/min  feeder velocity min.: 240 mm/minDIMENSIONS / WEIGHTS  space requirements -left/right-: 4900 mm  space requirements -front/back-: 5000 mm  total height: 3100 mm  total weight approx.: 13000 kgwith inline measuring system DISKUS IONIC 17AEmulsion treatment system HÜTTNER F6-157 ...

dayligth: 420 mmMagnetic field: 420x200 mmgrinding length: . mmweight of the machine ca.: tdimensions of the machine ca.: mStepless automatic feed for table 3-40 m/minReturn feed for tableFilter attachmentHydraulic unitCoolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mmgrinding length: 1000 mmcentre height: 125,175,225 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ±8 °longitudinal feed of the table: 1300 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 70 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 4,2 x 2,0 mReady for delivery, with 12 month warranty in germany and neighbouring countries!Geometrically overhauled and repainted with new electrics.In KELLENBERGER quality!-Digital display in 2 axes. Resolution x-axis 0.5my-Modern workpiece headstock with cone MK5-Modern tailstock with ...

Percursos X/Y/Z: 900 x 400 x 200 mm Tamanho da mesa: 800 x 400 mm

Estado da máquina: A máquina está atualmente em uma condição usada, não revisada. Todas as peças de desgaste da máquina são substituídas, incluindo o eixo de alimentação no eixo X, e todos os conjuntos são restaurados para a mesma condição nova. Após a revisão, a máquina pode ser facilmente comparada a uma nova máquina. Geometria: A máquina é completamente desmontada, exceto para as guias. Antes que a geometria das mesas e conjuntos individuais possa ser restaurada, as duas guias dos eixos Z e X são raspadas manualmente e restauradas para o estado de menta. Após a conclusão do trabalho, a máquina recebe um relatório de medição de acordo com as especificações originais do fabricante. Eletrónica: A eletrônica e a carcaça do gabinete de controle serão completamente substituídas. Todas as peças elétricas são substituídas, incluindo os mot ...

Vender algumas máquinas do nosso armazém porque precisamos do espaço para expandir

grinding diameter: 630 mmgrinding length: 600 mmcentre height: 320 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMachine with heavy duty workhead.Machine will be partial overhauled before delivery.Machine will get a geometry protocoll according to the Kellenberger new machine guidelineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rebolo Ø: 300 mm Largura da roda de moagem: 50 mm Velocidade da roda de moagem: 1400 rpm Tração à roda de moagem: 380 V, 1,5 kW Requisito de espaço: 1050 x 580 x 1200 mm Peso aprox.: 140 kg

comprimento de moagem: 600 mmlargura de moagem: 300 mmaltura da peça: 350 mmrequisito de potência total: ? kWpeso da máquina ca.: 2,5 tdimensões da máquina ca.: 2,522 m

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 180 mmControl: Fanuc 180-T grinding wheel width: 80 (100) mmgrinding wheel diameter: 450 mmpower capacity - grinding motor: 7,5 kWtable speed -stepless-: 10 m/mingrinding spindle head - swivable: +5 / -180 °turning speed range - workpiece spindle: 10 - 800 U/mingrinding head swivelling: 0 - 15 °workpiece weight max.: 120 kgtaper in tailstock-quill: MK 4 tailstock quill stroke: 35 mmdressing device: voltage: 400 Vtotal power requirement: 18 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 3,75 x 2,25 x 1,80 mband filter unit: 1,75 x 1,20 x 0,80 m- Serial No.6769- Universal Cylindrical Grinding Machine with internal grinding spindle- CNC-controlled B-Axis for automatic. swivel of spindle headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 8400 mmgrinding width: 1450 mmworkpiece height: 1250 mmsurface area: 8000 x 1250 mmtable height over floor: 920 mmdistance between columns: 1470 mmworkpiece weight max.: 59700 kgweight of the machine ca.: 59,7 tdimensions of the machine ca.: 22 x 5 x 5 mAdjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mmAdjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/minTable drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kWThe data for this ad was created wi ...

grinding diameter: max. 320 mmgrinding length: 1.500 mmcentre height: 160 mmControl: Touch Jones & Shipmanbetween centers: max. 100 kgtable:: Traverse Z-Axis: 1.645 mmtraversing speed: 0,0001 - 12 m/minswivable: +5 / -5 °x-axis:: Traverse X-Axis: 260 mmtraversing speed: 0,0001 - 6 m/mingrinding head:: grinding wheel motor: 7,5 kWcutting speed: 45 m/sGrinding wheel Ø x width x bore: 450 x 50 x 203,2 mmTailstock:: Swivel range: -15 / +90 °turning speed range: 0 - 660 U/minTorque: 27 Nmtool adaptor: MK 3 total power requirement: kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 5,5 x 2,5 x 2,0 mpaper band filter: magnetic separator for cooling water: Coolantsystem: Cylindrical Grinding MachineJONES & SHIPMAN - Suprema Easy 1500 E- Replacement grinding wheel flange- Multi-grain diamond (for circumferential and lateral dressing, 10mm, 1 carat)- Tailstock with micro a ...

: 0600 mm: 300 mm: 342 mm: 700x340 mm: 355x38x127 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0800 mm: 400 mm: 342 mm: 900x460 mm: 355x38x127 mm: 2400 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mmgrinding width: 300 mmworkpiece height: 230 mmtable surface area: 1000 x 240 mmx-travel: 1000 mmy-travel: 270 mmz-travel: 350 mmgrinding wheel diameter: 240 mmgrinding spindle speed: 2180 U/mintable speed -stepless-: 3 - 30 m/mintotal power requirement: 4,5 kWweight of the machine ca.: 2,8 tdimensions of machine L x W x H: 2,36 x 1,37 x 2,0 mAccessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.