usava EWAB para venda

Instalação completa para a produção de tijolos L e painéis de paredeLista de moldes : 7 peças de cofragem de painel de parede de 12 cm Posição 1 Cofragem de painel de alvenaria 550 / 800 x 490 mm Número de painéis de parede: 12 peças 550 x 490 mm 12 peças 550 x 490 mm Posição 2 Cofragem de painel de alvenaria 550 x 990 mm Número de painéis de parede: 16 peças 550 x 990 mm Posição 3 Cofragem de painel de alvenaria 800 x 990 mm Número de painéis de parede: 16 peças 800 x 990 mm Posição 4 Cofragem de painel de alvenaria 1050 x 990 mm Número de painéis de parede: 16 peças 1050 x 990 mm Posição 5 Cofragem de painel de alvenaria 1300 / 1550 x 990 mm Número de painéis de parede: 8 peças 1300 x 990 mm 8 peças 1550 x 990 mm Posição 6 Cofragem de painel de alvenaria 1050 / 1300 x ...

com controle CNC, Fabr. SIEMENS, tipo: SINUMERIK 840D POWERLINE, torreta com 12 posições de ferramenta, velocidade máxima: 4000 rpm, número de eixos: 3, diâmetro máximo de circulação: 300 mm, diâmetro máximo de giro: 300 mm, comprimento máximo de giro: 300 mm, com sistema de carregamento de peças, Fabr. EWAB

MARCA: DMG GILDEMEISTER ANO: 2008 MODELO: CTV 250 (V3) HORAS DE PRODUÇÃO: 44158 TIPO DE APLICAÇÃO: TORNEAMENTO LOCALIZAÇÃO: HUNGRIA TIPO DE MÁQUINA: TORNO DISPONIBILIDADE: IMEDIATAMENTE Informação Técnica DADOS GERAIS LARGURA DAS MEDIDAS: 2720 MM PROFUNDIDADE DAS MEDIDAS: 4100 MM ALTURA DAS MEDIDAS: 2860 MM PESO DA MÁQUINA: 8200 KG UNIDADE DE CONTROLO MARCA: SIEMENS MODELO: SINUMERIK 840D UNIDADE PRINCIPAL FAIXA DE VELOCIDADE DO EIXO: 5000 1/MIN MOVIMENTO MOVIMENTO DO EIXO X: 1100 MM MOVIMENTO DO EIXO Z: 300 MM MOVIMENTO DO EIXO C: 240 NM MM MÍDIA TRANSPORTADOR DE CHIPS: SIM Informação Adicional BENEFÍCIOS DA MÁQUINA BENEFÍCIOS TÉCNICOS DA MÁQUINA: - Y (OPCIONAL): 20 000 N - PORTA-FERRAMENTAS: DE ACORDO COM A NORMA DIN 69880 - CHUCK: 250 MM - CABEÇA DA TORRE: 12 POSIÇÕES - + TRANSPORTADOR EWAB PS800 PARA PEÇAS/PEÇAS

Instalação de separação de resíduos - instalação de desembalagem Instalação de eliminação de resíduos alimentares/instalação de separação e separação de alimentos e resíduos industriais. A inovadora estação de separação húmida para o tratamento e separação de resíduos mistos, embalados e não embalados. Esta central é uma solução para a resolução dos resíduos municipais da AT da Portaria de Eliminação de Resíduos, que proíbe a eliminação/aterro de resíduos urbanos não tratados, orgânicos e biodegradáveis desde 1 de junho de 2005. Ao processar e separar resíduos orgânicos e/ou urbanos, reduzimos a poluição e proporcionamos um maior volume de biomassa de alta qualidade para reciclagem. Se os resíduos não forem previamente desembarcados, esses resíduos são processados e reciclados. Os componentes orgânicos são devolvidos como com ...

Máquina de processo Karl Schnell com dispositivo de elevação e carrinho de carga. Processo automático: FV175-200 Tipo 046 Guincho : 200 Tipo 601 Volume nominal 200 l, volume total 250 l Dimensões: L x W x H (mm): 2900 x 1850 x 2400, Peso: 1705 kg Dimensões da plataforma: L x W x H (mm): 1600 x 650 x 1800, sem parafusar Desempenho e capacidade: pré-trituração, trituração ultrafina, agitador, bomba de vácuo. Temperatura máxima do vapor: 120 C. Temperatura máxima de funcionamento: 110 C. Pressão máxima de vapor: 2 bar. Limpeza CIP: 2 bar, 85 C. Ano de construção: 2020 Recém-adquirido para desenvolvimento de produtos, apenas aprox. 900 horas de funcionamento. Condição muito limpa, como novo. Marca CE: Sim Estado: Como novo, meticulosamente mantido e pronto a usar. Disponibilidade: Sob consulta

Temos o prazer de apresentar a nossa mais recente gama de transformadores de óleo de média tensão do renomado fabricante alemão Energeks GmbH, especialmente projetado para atender às diversas exigências do setor elétrico e de energia europeu. Destaques do produto: Potência nominal: 2000 kVA Nível de alta tensão (Gn): 20 kV Nível de baixa tensão (Dn): 420 V Controle ajustável: ±2x2.5% Conformidade e Certificação: Totalmente certificada e em conformidade com as mais recentes normas industriais e de segurança da UE. Características de proteção: Equipado com proteção hermética abrangente e uma gama completa de monitores, garantindo durabilidade excecional e confiabilidade consistente. Serviço de Garantia: Oferece uma extensa garantia de 5 anos a partir da data de ativação, dando-lhe tranquilidade e protegendo o seu investimento. Áreas de aplicação ó ...

Secador composto galvanizado, 3 módulos, tanque de armazenamento, subestrutura aparafusado, aquecedor móvel indireto, óleo leve Telefone: 01715213204

x-travel: 1300 mm y-travel: 600 mm z-travel: 800 mm control: Heidenhain TNC 530 table dimensions: 1030 x 630 mm turning speed range: 10000 U/min power capacity at 60% / 100 % load: 30 / 17 KW max. torque at 40% / 100% load: 190 / 120 Nm feeds x/y/z: 30 m/min tool taper: HSK A63 tool magacine with: 80 Plätzen rotary table diameter: 630 mm : 40 bar slewability of milling head: +/- 105 ° table load: 2,50 t total power requirement: - kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: - m 2022 Spindle overhaul 5-axis BAZ With: - HEIDENHAIN iTNC530 control - swivel head +/- 105 - electronic handwheel, - NC rotary table integrated (dia. 630mm) - Coolant system, coolant through the spindle 40bar - paper belt filter - tool changer 80-fold (HSK A63) - direct measuring system in x,y,z - Tool breakage control & length measurement - Machine on: 000h Spindle run: 0h The data for  ...

: neu : 2024 : 2517 : Juni 2024, Zwischenverkau : Deutschland : 36950 € : 750.09 € : 1500x3000 mm : Hypertherm Powermax 105 S : 22 mm : 22 mm : 50 mm : 19 mm : 105 A : 105 A : 24 m/min : 1/10 mm : 400 kg/m² : 3560 mm : 1960 mm : 1500 mm : 650 kg compressed air powered plasma sourceHYPERTHERM Powermax 105 Sync CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTIONS: Height adjustment by arc voltage Set-up laser Suction bridge (prepared for suction dia ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 25230 € : 1250x2500 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : 1/10 mm : 470 l : 500 kg/m² : 3060 mm : 1760 mm : 1500 mm : 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air co ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 22750 € : 1000x2000 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : unter 1/10 mm : 300 l : 400 kg/m² : 2560 mm : 1460 mm : 1500 mm : 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules alternative plasma sources: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air c ...

Standard configuration Machine ? Solid machine frame with integrated laser resonator ? Feed station with self centering clamps ? Automatic tube support for raw material ? Feeder claws with self centering parallel collet chuck ? High-precision motors: Digital 3-phase servo motors with high precision of the drive axes. ? Part removal station PRS 3001 with brush table, finished parts up to 3000 mm long ? Tube support for finished parts with wheel-away guide rollers ? Enclosed beam delivery ? NitroLine ? FocusLine ? SprintLine ? Laser power control ? Programmable cutting gas pressure ? Automatic shutdown device ? Work area lighting TRUMPF laser ? CO2 laser TruFlow 2000 ? Radio-frequency excitation ? Maintenance-free radial turbine blower ? Laser control TASC 3 ? Laser log book function ? Chiller Cutting head ? Laser cutting head with 155 mm (6?) lens ? ControlLine Control ? Sinumerik ...

General SKU025C042 LocationBarneveld MakeServo-Lift GmbH / Pharmatech TypePharmalift Hoist No.E-4398 A Year of construction1992 Main Features MaterialStainless steel Motor1.5 KW Height2550 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machineSlewable IBC hoist (1x) Max. weight150 KG Lifting height695-2550mm Hydraulic drivecheck With hydraulic unitcheck Motor1,5 KW, 230/400 Volt Information With switchgearcheck Floorspace1,8x1,0 M Total height2,9 M Extra Specifications- With 1x IBC (316), Dim. 500x500x400mm, Conical bottom 350mm Lifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in ...

General SKU296U566 LocationBarneveld MakeWAB Bachofen TypeKD 45 D No.971227 Year of construction1997 Main Features Volume46 Ltr. Motor44 KW Specified Features - Sand mill MaterialNickel alloy (201) 2.4068, stainless steel 1.4721(heat resistant) Horizontal sand millcheck Capacity46 Ltr Housing dimensions Dia:300x790mm InletDN15 OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor44 kW, 380 volt, 1465rpm(ex) Rotor speed730rpm Without ballscheck Capacityrange 180-1000 l/h Information Total height1,9 m Weight1560 kg Floorspace1,85x1,15 m ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

General SKU296U565 LocationBarneveld MakeWAB-Bachhofen TypeKD 45 No.760735 Main Features MaterialStainless steel Volume45 Ltr. Motor33 KW Specified Features - Sand mill Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) Horizontal sand millcheck Capacity45 Ltr. Housing dimensions Dia: 290x750 InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor33 kW, 380Volt,985rpm (EX) Rotor speed985rpm With ballscheck CapacityCap. range 180-1000 l/h With pumpPonndorf, PX15 Motorcheck Information With switchgearcheck(as is) Floorspace1,4x1,0 m Total height1,8 m Weight1200 kg ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

General SKU276T627 LocationBarneveld MakeWabru TypeWABRU PAN 130 E No.6656 Year of construction2001 Main Features MaterialStainless steel Motor1.1 KW Inlet diameter780 mm Specified Features - Coating pan MaterialStainless steel 1.4301 (304) Coating pancheck Batch size130 kg Pan diameter1200 mm Pan depth750 mm In-/Outletdia. 780 mm Pan can be tiltedcheck Motor0,18 kW 230/400 Volt With frequency controllercheck Pan speed16/20/24 rpm Motor1,1 kW Information Mounted on framecheck With switchcheck Weight500 kg Floorspace1,8x1,5 m Total height1,9 mCoating pansWalter BrucksCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in B ...

General SKU244K215 LocationBarneveld MakeFördertechnik AG Münchenstein TypeFT-150 S, Slewable No.96310-130/17079 Year of construction1996 Main Features MaterialStainless steel Height2400 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting + tilting machine(1x) Max. weight150 KG Lifting height± 2400mm Mechanical drivecheck Motor400 Volt (Ex) Suitable for product sizes± 800x800mm Information With switchgearcheck Floorspace2,0x1,2 M Total height3,1 M Weight500 KG ATEX compatiblecheckLifting/tilting machinesFoerdertechnikConveying systems > Lifting/tilting machinesBrand > Foerdertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barnev ...

General SKU300U582 LocationBarneveld MakeWab Bachofen TypeTurbula T2 No.P640523 Year of constructionunknown Main Features MaterialMild steel Volume2.5 Ltr. Specified Features - Tumbler mixer Tumbler mixercheck Barrel mixercheck Capacity2,5Ltr. Diameter140 mm Length/Depth180 mm With motor220 volt With variable speed drive80 rpm MaterialMild steel Information Mounted on mild steel framecheck Total height0,36 m With switchcheck Floorspace0,45x0,65 m Extra Specifications80 upmTumbler mixersWab BachofenMixers > Tumbler mixersBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Semiautomatic saw with assisted descent used year 2016 viewable and in good condition. Vice with pneumatic actuator.

Deckel Maho 5 axis machining center Mod. DMU 80 Machine in good general condition, viewable Specifications Manufacturer DMG Model DMU 80 Year 1997 Condition Used Axis x (strokes) 800 Y axis (strokes) 700 Z axis (strokes) 600 Spindle connection (spindle) BT40 Number of tools (atc magazine) 30 Length of the table (table) 800 Width of the table (table) 800 Chip conveyor YES Spindle speed (main spindle) 12,000 rpm

MAUT portal boring machine mod PM3 from 2005 Working range: X: 7000 - Y: 3600 - Z: 1500 Axis speed: Rapid: 20,000 - Work: 15,000 32 kW motor Overall dimensions: 15.5 x 9 mt Work surface: 9000 x 2500 CNC: Selca 4060 Chain tool magazine, 40 places, BT50 cone Coolant on axis Spare parts available: 1 regenerated handwheel, 1 keyboard card, 1 sliding guide cover. Reduced bevel gear a year ago Machine in working condition, currently at work, viewable at the MEC in Mondovì CE certified Manuals and diagrams available Condition as seen and liked

x-travel 3000 mm y-travel 650 mm z-travel 800 mm control Heidenhain 426/430 table dimensions 3.500 x 750 mm turning speed range 7300 U/min with transmission tool taper SK50 tool magacine with 48 Plätzen IKZ KNOLL slewability of milling head + / - 90 integrated rundtisch 750mm 2x made by FIBRO weight of the machine ca. 24 t dimensions of the machine ca. 8,4 x 4,4 x 3,6 m Table max. 2,500 kg load chip conveyor without vise prepared for delivery

swing diameter:320 mm control:840 D SIEMENS turning speeds:5000 1/min spindle drive:20 / 27 kW chucking diameter:250 mm travel -x axis:650 mm travel -z axis:300 mm turret head:12 Pos. tool holder:VDI 40 toolpiece turning speed range:4000 1/min work piece power:max. 11,7 kW weight of the machine ca.:8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on"

Fabricante: Homag , para o lado esquerdo da máquina: sim, para o lado direito da máquina: sim, Número de motores: 2, Motor : Perske, kW-Leistung : 1-1,5, Volt/Hz : 220-380/50-100, Drehzahlen U/min : 2670/5710, Siko Anzeige : sim, Rollentastung Horizontal: não, Pneumaticamente controlado: não, Dimensões do eixo L x D mm: 30, Slewable verticalmente: sim, Motor 2: Perske, kW-output 2: 1,5, Volt/Hz 2: 220-380/50-100, Velocidade rpm 2: 2670/5710, Silo indicação 2: sim,

Fabricante: Ima Fräsständer, para o lado esquerdo da máquina: sim, Número de motores: 2, Motor : KCS.71.16-2.0 Perske, kW-Leistung : 4,4/6,6, Volt/Hz: 50/100, Drehzahlen U/min : 2860/5870, Pneumaticamente controlado: não, Slewable horizontalmente: não, kW-output 2: ca.0,75, Volt/Hz 2: 133, Speed rpm 2: ca.6000, Silo indicação 2: não, TEXTO GRÁTIS: Freiplatz für weiteren Motor, Silo

Fabricante: IMA Radienschleifeinrichtung oben und unten, Peça de reposição da máquina: IMA, Unidade de lixamento de perfil: sim, para o lado esquerdo da máquina: sim, Acionamento próprio: sim, Altura total mm: 600, Diâmetro máximo do rolo: 40, Elegante horizontalmente: sim, Altura da correia de lixamento: 20, Cabeça de lixa elegante: sim, Comprimento máximo da correia de lixamento mm: ca.2100, kW do motor principal: 2 X 0,25, Fixação pneumática da correia: Sim, ajuste de altura por roda manual: sim, raio lixar dispositivo: sim, Oscilação: não,

Manufacturer: Arminius Fräs und Kantenschleifmaschine, Type: SP 12, Program: yes, Axis control: no, Work piece width min-max mm: 60-500, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 100, Sanding hight mm: 120, Surface sanding units: 1, Profile sanding units: 2, Phase units: 2, Monting of the machine: Fräsen/Schleifen von oben/gerade schleifen/Phase/Phase/Bürste/Bürste, Unit 1 tiltable: yes, Unit 1 Kw: 2,2, Unit 2 slewable: no, Unit 2 Kw: 2,2, Unit 3 slewable: no, Unit 3 Kw: ca.2,0, Unit 4 slewable: yes, Unit 4 Kw: ca 1,0, Unit 5 slewable: yes, Unit 5 Kw: ca. 1,0, Unit 6 slewable: Bürste, Unit 6 Kw: Bürste, Shoes electr. controlled: yes, Constant table hight: yes,

Fabricante: IMA Fräsständer, Peça de reposição da máquina: IMA Combima, para o lado esquerdo da máquina: links, Motor : Perske, kW-Leistung : 4,5/6,6, Drehzahlen U/min: 5800, Siko Anzeige : sim, Rollentastung Horizontal: não, Pneumaticamente controlado: sim, slewable verticalmente: sim, Disponível Baufetie 400 mm,

Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Compressed air bar: 6, Noise enclosure: yes, Year :1994

Fabricante: IMA Faseschleifaggregat, Peça de reposição da máquina: Combima, Motor : 1, kW-Leistung : 1.75, Drehzahlen U/min : frequenzgesteuert, Deteção vertical de rolos: sim, Baugrösse L x B x H mm: 400x700x90, Slew verticalmente: sim,

Fabricante: IMA Doppelzerspaner, Peça de reposição da máquina: Combima, Número de motores: 2, kW-Leistung : 4.4, Siko Anzeige: sim, Baugrösse L x B x H mm: 650x650x1200, Ajuste do revólver: não, Slewable verticalmente: não, kW-output 2: ca 4.4, Silo indicação 2: sim,

Fabricante: Evimatic, Tipo: HF 82 CB, Ano: 2000, Controlo: Sim, Controlo: sim, largura da peça de trabalho min-max mm: min. 200, Schleifaggregate rechts : 2, Unidade 1 inclinada: sim, Aggregat 1 kW: ca. 1,5, Unidade 2 slewable: sim, Aggregat 2 kW: ca.1,5, Número de cintos de controlo de frequência: 2, Unidade de escovagem: 1, Comprimento total mm: 2500, Ano :2000

Fabricante: IMA Doppelfräsständer, para o lado esquerdo da máquina: ligações, Número de motores: 1, kW-Leistung : 4.4, Siko Anzeige : sim, Baugrösse L x B x H mm: 750x800x800, Slew verticalmente: sim,

Fabricante: IMA Schwabbelagregat, Unidade própria: sim, total de alta mm: 550, Largura de instalação mm: 400, Slewable verticalmente: não, motor principal kW: 4x0,18,

Manufacturer: Arminius Leistenfräs und Schleifmaschine 2 Maschine verstellbares Bett, Type: SP 39, Year: 1994, Monting of the machine: 2 X Fräsen/2 X vertikal schleifen/2X horizontalschleifen/Radiusshleifen schwenkbar/2 Radius schleifen oben/unten, Sanding width mm: 120, Sanding hight mm: 120, Sanding belts horizontal/bottom: keine, Sanding belts horizontal/longitudinal: 5, Sanding belts horizontal/traverse: no, Number of sanding belts left: 6, Sanding belts on right, qty.: 6, Bandschleifaggregate Stk.: 10, Bürstenaggregate Stck.: no, Right side units Qty.: linke und rechte Seite sind gleich Bestückt, Unit 1 tiltable: Zerspaner, Unit 2 slewable: rechts und links Profifräse, Aggregat 2 kW: ca. 2,2 , Unit 3 slewable: rechts und links Kantenschleifen Vertikal/nicht schwenkbar, Aggregat 3 kW: 1,5, Unit 4 slewable: rechts und links Kantenschleifen Vertikal/nicht schwenkbar, Aggregat 4 kW ...

Manufacturer: Technolegno, Year: 1989, Program: SPS, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 150, Sanding hight mm: 40/60, Schleifaggregate links : 3 + 1+ 2, Surface sanding units: 4, Profile sanding units: 1, Sanding unit discs: Kopierschleifaggragt, Monting of the machine: 4 Langband<CRLF>1 Bürste<CRLF>1 Kopierschleiffen, Unit 1 tiltable: yes, Unit 1 Kw: 0,75, Unit 2 slewable: yes, Unit 2 Kw: 0,75, Unit 3 slewable: yes, Unit 3 Kw: 0,75, Unit 4 slewable: yes, Unit 4 Kw: 0,75, Unit 5 slewable: no, Number of frequency controlt belts: über Getrieb, Sanding belt speeds m/min: 3-18 m/sec, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 1, Wight approx. kg: 4000, FREE TEXT: Vorsch von 3-18 Meter, Year :1989

Fabricante: IMA Radienschleifaggregat, Número de motores: 1, kW-Leistung : 1,75, Drehzahlen U/min : frequenzgesteuert, deteção vertical de rolos: sim, Slewable horizontalmente: 400x700x900, Slewable verticalmente: sim,

Fabricante: Reckmann, Tipo: Profilschleifmaschine, Ano: ca.1979, Controlo: mão, largura da peça de trabalho min-max mm: 100-300, Min.-max. altura da peça de trabalho em mm: 10-60, Comprimento da peça de trabalho min-max mm: 150, Schleifaggregate rechts : 3 X Doppelkopf<CRLF>schwinschlifer, Unidades de lixar perfil: 3, Unidade 1 inclinada: sim, Unidade 2 slewable: sim, Unidade 3 slewable: sim, cintos de areia m/min: shcwingung eistellbar, Shoes electr. controlado: sim, mesa constante alto: sim, comprimento da máquina: ca.4500, ano :ca.1979

Manufacturer: De Stefani, Type: MVT 3500, Year: 2008, Monting of the machine: 3 X Profilschleifen, Program: yes, Axis control: no, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 80, Work piece length min-max mm: 250, Sanding hight mm: 80, Schleifaggregate rechts : 3, Abrasive belts at top: 3, Monting of the machine: 3 X Profilschleifen, Chain width mm: yes, Monting of the machine: ca.1,5, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,5, Unit 9 slewable: 3, Shoes electr. controlled: yes, Constant table hight: yes, Machine length: ca.4000, Year :2008

Fabricante: MB Maschinenbau, Tipo: ROBA-Simplex, Ano: 2010, Controlo: Sim, Monting da máquina: Schleiflamelle, Controlo: Sim, Lixar cinto alto: 100 mm, Comprimento da tabela: 1800 mm, Cabeça de lixar slewable: não, largura do cinto de areia max mm: 100, Peça de trabalho alta min-max mm: 80, Schleifbandgeschwindigkeit min-max m/sec: Frequenz, Bandantriebsmotor kW: ca.4, Oszillation mm: sim, Ajuste alto por roda: SIM, TEXTO GRÁTIS: Luftpolsterkissentisch, Ano :2010

Manufacturer: IMA , Type: Advantage 5620, Year: 2001, Program: IMA, Control: IMA, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 70-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 45, Min-max feed m/min: ca. 20, Premilling: yes, IR zone: yes, Lasertechnik: yes, Kw-Leistung Laser: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: yes, Grooves, slewable-controlled: yes, Type of scraper: yes, Cleaning nozzles: yes, Edge sanding: yes, Profile sanding top bottom: Rolle, Roller/belt: 6, Year :2001

Fabricante: Homag, Peça de reposição da máquina: Homag Kf, para o lado esquerdo da máquina: ligações, Número de motores: 1, Motor : Perske, kW-Leistung : 4,4, Volt/Hz : 100, Drehzahlen U/min : 5860, Pneumaticamente controlado: sim, Dimensões do Eixo L x D mm: 30, Slewable horizontalmente: sim, pneumatischeu gestert: sim,

Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling: yes, IR zone: yes, Coil magazine: 4-fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: MFA, 2 motors: yes, Servo copying: yes, Rolling chain: yes, Bonding part EVA: yes, Vertical grooves: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, Flat scraper: yes, Servo copying: yes, Year :1999 Überholt 2010

Fabricante: Homag Doppelzerspaner mit Schutzfräsen, Peça de reserva da máquina: Homag, para o lado esquerdo da máquina: sim, Número de motores: 3, Motor : Perske, kW-Leistung : 3/4,4, Volt/Hz : 50/100, Drehzahlen U/min : 2880/5860, Siko Anzeige : sim, pneumaticamente controlado: sim/mit Revól, Rolável horizontal 3: sim, TEXTO LIVRE: Nurä Stnderne Motore,

Fabricante: Arminius, Tipo: ST 2, Ano: 1991, Controlo: Mão, Comprimento da tabela: 2000, Peça de trabalho de alto nível min-max mm: 10-60, Velocidade de alimentação min-max m/min: 5-25, Controlável: Sim, Número de unidades de lixamento: 2, 1º motor de lixamento controlado e inclinado: Schleifscheiben Typ Arminius, Power kW: 1,1, 2º motor de lixamento controlado e inclinado: Schleifscheiben Typ Arminius, Power kW: 1,1, 1, Potência kW: 1,1, Power kW: 1,1, Painel de controlo na parte inferior: sim, Ajuste alto por roda manual: sim, Ano :1991

Manufacturer: Homag, Type: KL 10/21/QA, Year: 1999, Program: Homatic, Control: PC 21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 50, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-30, Axis control: yes, Infeed table: no, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, IR zone: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: yes, Radius milling axis adjustment: yes, Corner tracing type: FK 13, 2 Motoren: 2, Magazin : 2 X 12, with tool holders: HSK, Grooves, slewable-controlled: Freiplatz, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Corner trace buffing: no, Corner trace buffing: no, Bonding part EVA: 2 Stück, Number of tools per tool-magazine: 2 X 8, Buffing unit: yes, Roller/belt: Riemen, Freiplätze:  ...

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...

Manufacturer: Homag, Type: KAL 310/7/A20/S3 , Year: 2011, Control: PC 22, Software: Windows XP/Woodscout, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 12-60, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 18, Axis control: einlauflineal, Infeed table: Servo, Servo Einschubtisch: yes, mit Vakuum: 2 X 3 kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2-fach, Laser technology: yes, kW Leistung Laser: yes, Coil magazine: HL 84, Strip magazin: 2 X 1,5, Bevel milling: FK 8-fach Wechsler, radius milling: FK 13/Achsverstellung, Vertical grooves: Multiziehklinge MN 21 3 Profile, Grooves, slewable-controlled: PN 10, Nuten : yes, Radius scraper: yes, Servo copying: yes, Spraying system 2: A 20, Ersatzverleimteil : 5 kg, Number of sanding units: yes, Profile sanding top bottom: Einlauf und Auslauf, Barcode: möglich, Workpiece supp ...

Fabricante: KBM Kantenschleifmaschine, Tipo: KBM 3200, Ano: 2013, Controlo: mão, Controlo: mão, diâmetro do rolo D mm: ca.120, Paragem de mesa mm: ca.900, área de lixar (feixe): sim, largura do cinto de lixamento max mm: 150, Lixar o comprimento do cinto máximo mm: ca.3200, unidade de lixamento de areia até 45°: sim, Schleifbandgeschwindigkeit min-max m/sec: 2 Estufacto, sanding dimensões do cinto de areia mm: ca 3200 X 150, Bandantriebsmotor kW: 2,2, Oszillation mm: ca.20, Ano :2013

Manufacturer: Delle Vedove, Type: SPL /7/200, Year: 1995, Sanding width mm: ca.10-100, Sanding hight mm: 80, Sanding belts horizontal/bottom: 1, Bandschleifaggregate Stk.: 1, Bürstenaggregate Stck.: 3 links+3 rechts, Right side units Qty.: Band, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: Bürste, Aggregat 2 kW: ca.1,2, Unit 3 slewable: Bürste, Aggregat 3 kW: ca.1,2, Unit 4 slewable: Bürste, Aggregat 4 kW: ca.1,2, Unit 5 slewable: Bürste, Aggregat 5 kW: ca.1,2, Unit 6 slewable: Bürste, Aggregat 6 kW: ca.1,2, Unit 7 slewable: Bürste, Aggregat 7 kW: ca.1,2, Transport chain mm: yes, Feeding speed min-max m/min: 5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Brushing unit: yes, machine ready for demonstration: yes, FREE TEXT: mit automatischer Schleifscheiben Zustellvorrichtung für Schleifscheibenaggregate/inkl Siko Apstapelanlage, Year :1995