usava EWAB para venda

Manufacturer: Heesemann, Type: UKP 22, Year: 1989, Control: Hand, Sanding belt hight: 60, Table size mm: 2100, Roller diameter D mm: 10-60, Table stop mm: 60, Sanding area (beam): 5-25, Sanding belt length max mm: yes, Feeding speed min-max m/min: 6, Milling units: yes, Controllable slewable: no, Laquer sanding: ca.2, Main engine kW: yes, Controllable slewable: no, Laquer sanding: ca.2, 1st sanding motor controlled and tiltable: yes, Controllable slewable: no, Laquer sanding: ca.2, 2nd sanding motor controlled and tiltable: yes, Controllable slewable: no, Laquer sanding: ca.2, Frequency controlled: yes, Power kW: yes, Length front table mm: EGZ 2 Stück, Control panel on top: yes, Belt clamping pneumatically: inkl.2 EG Radienschleifgeräte und ein Bürstenmotor/Bürstenschleifmotor mit Scotch Walze/Länge Maschine 8400 mm, Year :1989

Fabricante: Bauerrischter, Tipo: KSK 92, Ano: ca.1997, Controlo: mão, Monting da máquina: 1 Schleiband, Controle: mão, lixamento de cinto alto: 60, Comprimento da tabela: ca.2000, cabeça de lixar slewable: sim, Table stop mm: sim, área de areia (feixe): 60, largura do cinto de lixamento máximo mm: 2000 X 60, Sanding belt length max mm: 2000, Peça de trabalho alto min-max mm: 50, 50, 50, lixamento comprimento máximo mm: 2000, Peça de trabalho alto min-max mm: 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, Velocidade de alimentação min-max m/min: 5-15, 1 Schleifmotor kW: ca.1,5, unidade de lixamento de areia até 45°: 90-45, Adequado para lixar verniz: sim, Ano :ca.1997

Manufacturer: Homag, Type: KL 10/18/QA, Year: 2000, Program: Homatic, Control: NC 21, Min.-max. workpiece height in mm: 85 - 1200, Edgeband height max mm: 240, Min-max feed m/min: 8 - 60, Axis control: 0,3 - 3,0 , Einlauflineal gesteuert: 10 - 40, Application of separation agent: 0,4 - 12, Power per lamp: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: Granulat, Strip magazin: yes, Magazin : yes, Grooves, slewable-controlled: FK 13, Nuten : UF 11, Radius scraper: yes, Type of scraper: 8, Scraper with axis adjustment: yes, Flat scraper: 2, Type of scraper 2: yes, Corner trace buffing: 2 X Fase, 4 motors: yes, Corner trace buffing: yes, Servo-Kopieren: yes, Rollende-Kette: Band, Ersatzverleimteil : Riemen, Bonding part EVA: 6, Nozzle: 11.000, Pre-smelting Kg/Hr: yes, Year :2000

Manufacturer: Homag mit Doppelenprofilerformatteil, Type: KFL 23/03/27/PU/30+ZHR 05, Year: 2000, Program: NC 21, Control: Homatig, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 250-2600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-55, Edgeband height max mm: 60, Min-max feed m/min: 30, Finished product: Fronten Küche, Axis control: yes, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Schutzfräsen/zerspanen/zerspanen, IR zone: yes, Coil magazine: 2 X 24 fach, Strip magazin: no, Min.-max. batten magazine mm: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: FK 13/6 fach, Grooves, slewable-controlled: 2, Radius scraper: yes, Type of scraper: yes, Scraper with axis adjustment: yes, Cleaning nozzles: yes, Bonding part EVA: PU Verleimteil, Number of tools per tool-m ...

CharacteristicsSwing- Ø, max.450 mmWeight approx.10000 KgDrive power milling spindle9,5/5,5 kWDrive power main spindle15/11 kWDrive power second spindle15/11 kWNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis+/-120 degreeMovements X / Z / Y455/800/+-105 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,001 degreeSpindle speed 2nd Spindle max.6000 rpmInput precision of C-axis on Mainspindle0,001 degreeBar diametre52 mmSpeed max.6000 rpmMax. Turning Length800 mmMax machining diameter430 mmDimensions (L x W x H)4,17 x 2,5 x 2,5 (4,55 x 2,5 x 2,5) mGeneralTurning-milling centre SZM: Tool spindle, Spindle 1, Spindle 2 and Turret 2 (Milling); Control: CELOS - ERGOline Spindle 1 hobbing functionSpindle 1 hobbing function Gear machining or spline machining is possible by synchronizing the rotary tool spindle rotation on turret 1 with the spind ...

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmSpeed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmMilling spindle upper side1 Bar diametre80 mmMax. Turning Length1530 mmSpeed max.4000 rpmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Weight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

GeneralTurning-milling centre; Control: Fanuc 31iB5 CharacteristicsSwing- Ø, max.1070 mmDrive power milling spindle22 kWDrive power second spindle22 kWDrive power main spindle22 kWNumber of Toolmagazine positions50 Speed max.8000 rpmSlewability of B-Axis1 degreeMovements X / Z / Y1040/+-330/3150 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,0001 degreeBar diametre164 mmSpindle speed 2nd Spindle max.1500 rpmInput precision of C-axis on Mainspindle0,0001 degreeBar diametre164 mmSpeed max.1500 rpmMax. Turning Length3076 mmMax machining diameter1070 mmWeight approx.46000 KgTool spindle full indexing specificationsErhöhung der mögl. Indexierung der B-Achse auf 0,0001º Einrichtung zur Positionierung der B-Achse mit einem minimalen Winkel von 0,0001º anstelle der Standardausführung mit 1º, einschließlich der Option Direktes Wegmesssystem in der B-Achse derSp ...

Description: serial number: 76220 control: SIEMENS Sinumerik 840D HMI working hours: approx. 36527 hrs.  , travels: X-axis (grinding worm feed): ,195 mm Y-axis (shift feed): 160 mm Z-axis (grinding feed): 100 mm  , rotary and swivel axes: B-axis (grinding spindle): power: 10 kW max. rotational speed: 5555 rpm C1 and C2-axis (workpiece spindle): torque: 25/70 mm rotational speed: 0 - 1000 rpm C4-axis (turn dressing device): swivel angle: 30° max. rotational speed: 5 rpm  , auxiliary axes: A-axis (bevel angle adjustment): rotation angle: +/- 40° rotational speed: 28°/s C3-axis (turn turret): swivel angle: 225° rotational speed: 50 rpm  , rapid traverse: X-axis: 15 m/min. Y-axis: 5 m/min. Z-axis: 5 m/min  , workpiece diameter: 10 - 145 mm number of teeth: 5 - 150 max. shaft length: 350 mm module rang ...

Description: Cogeneration plant for the electricity production from renewable sources The machine was created to be fueled with vegetable oils of rapeseed, sunflower and soybean oil, but thanks to the complex heated introduction system, it can burn animal fats and palm oil. The hourly production of electricity is equal to 940 kw/h The machinery is composed of: power source ,with fuel heating before combustion (underground tanks excluded) WÄRTSILÄ NSD 6R22/26 engine, produced in 1999 with a power of 1,065 kw at 1,000 rpm (power reduced to 940 kw/h to comply with authorisations) alternator DENOX system control panel catalytic silencer with cover and chimney chiller for cooling and heating systems hot water generation system with heat exchanger for powering warehouse heating systems transformer room ,with control panels, Landis+Gyr E650 meter, MESSINA SVT/R+AC/R medium  ...

Three-jaw chuck, three-jaw lathe chuck -screwable interchangeable jaws -Chuck size: Ø 200 mm -Weight: 12 kg

Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool, clamp pressing tool, upper tool -Die tool: Form tool / press tool 2-part -Pressure profile: Ø 70 x 140 mm, 15 mm overhang -Side part: unscrewable -Socket: Ø 40 mm -Dimensions: 250/70 / H298 mm -Weight: 21 kg

Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool, clamp pressing tool, upper tool -Die tool: Form tool / press tool 2-part -Lower part: unscrewable -Socket: Ø 40 mm -Dimensions: 260/90 / H175 mm -Total weight: 18.1 kg

Mobiliário de escritório, 3 mesas brancas IKEA cada uma aprox. 100x60x74h cm, pés metálicos aparafusados

x-travel: 1300 mm y-travel: 600 mm z-travel: 800 mm control: Heidenhain TNC 530 table dimensions: 1030 x 630 mm turning speed range: 10000 U/min power capacity at 60% / 100 % load: 30 / 17 KW max. torque at 40% / 100% load: 190 / 120 Nm feeds x/y/z: 30 m/min tool taper: HSK A63 tool magacine with: 80 Plätzen rotary table diameter: 630 mm : 40 bar slewability of milling head: +/- 105 ° table load: 2,50 t total power requirement: - kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: - m 2022 Spindle overhaul 5-axis BAZ With: - HEIDENHAIN iTNC530 control - swivel head +/- 105 - electronic handwheel, - NC rotary table integrated (dia. 630mm) - Coolant system, coolant through the spindle 40bar - paper belt filter - tool changer 80-fold (HSK A63) - direct measuring system in x,y,z - Tool breakage control & length measurement - Machine on: 000h Spindle run: 0h The data for  ...

: neu : 2024 : 2517 : Juni 2024, Zwischenverkau : Deutschland : 36950 € : 750.09 € : 1500x3000 mm : Hypertherm Powermax 105 S : 22 mm : 22 mm : 50 mm : 19 mm : 105 A : 105 A : 24 m/min : 1/10 mm : 400 kg/m² : 3560 mm : 1960 mm : 1500 mm : 650 kg compressed air powered plasma sourceHYPERTHERM Powermax 105 Sync CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTIONS: Height adjustment by arc voltage Set-up laser Suction bridge (prepared for suction dia ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 25230 € : 1250x2500 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : 1/10 mm : 470 l : 500 kg/m² : 3060 mm : 1760 mm : 1500 mm : 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air co ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 22750 € : 1000x2000 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : unter 1/10 mm : 300 l : 400 kg/m² : 2560 mm : 1460 mm : 1500 mm : 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules alternative plasma sources: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air c ...

Center distância: 0 mm Grinding cabeça Z-eixo: 0 mm Center altura: 0 mm CNC Marca: 0 CNC Modelo: 0 Control: GE FANUC Series 160i-MB Horas de funcionamento: 0 Seínicos Numbre do eixo simultâneo: 5 Se de comprimento: 500 mm Largura: 145 mm X eixo: eixo de 380 mm Y: eixo de 300 mm Z: 280 mm ro de cintura: 280 mm diâmetro de 280 mm: 280 mm ro de cintura: 240 mm Versão da roda de roda de rotação: 50 - 250 mm A eixo (rotação da cabeça moagem): 360 C (rotação da ferramenta): 210 Resolução: 0,0001 HSK: 50 As velocidades do fuso de rotação: stepless from: 50 rpm up até: 10000 rpm Max velocidade de encaminhamento: 20 m/min Max. cruzamento de velocidade de encaminhamento: 5 m/min Max velocidade de encaminhamento vertical: 20 m/min Voltage 50 Hz 3x: 400 Volt Spindle power: 9 kW Total power required: 27 kVA Machine's weight about: 8000 kg Overall dimensions machine: Length: 2270  ...

JUMBERCA DWN3E dd.12 year of production 1997 machine in excellent condition, working,viewable,equipped with IRO MEMMINGER power supplies.

bomba de invólucro de voluta, bomba de água, bomba centrífuga KSB SEWABLOC K 50-250 GH ano 2010 Q: 18 m3/h H: 6,br 6,0 m Motor: SIEMENS 1LA7106-6AA61-Z 1,5 kW 400 / 690 V 3AC usado, testado !; Dimensões: 840 x 330 x 400 mm

bomba de invólucro voluta, bomba de água, bomba centrífuga KSB SEWABLOC K 50-250 GH construído 2010 Q: 18 m3/h H: 6, 6,0 m Motor: SIEMENS 1LE10011AC422GB4-Z 1,5 kW 230 / 400 V 3AC usado, testado !; Dimensões: 870 x 330 x 440 mm

bomba de invólucro voluto, bomba de água, bomba centrífuga KSB SEWABLOC K 50-250 GH construído 2011 Q: 18 m3/h H: 6,br 6,0 m Motor: SIEMENS 1LE10011AC422GB4Z 1,5 kW 230 / 400 V 3AC usado, testado !: Dimensões: 870 x 330 x 440 mm