Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible.
Clamping unit: approx. 26000kg, injection unit: approx. 15000kg, max. total weight of the mold: 11400kg. Hydraulic oil: (2010dm³) approx. 1800kg. Dimensions X/Y/Z: approx. 10000mm/2650mm/2450mm.
Clamping force: 3500kN, injection unit: 1700, drive power: 75kW, control system: Graphtrack/DSP with trackball, plasticizing unit: HiMelt screw 70-220(1801bar,954cm³), mould height: 600mm-950mm. Operating hours: 83111 (as of: 14.04.2021). Buyer must provide oil filling after purchase. Material conveyor not included. Available from 30.07.2024. Documentation available. On-site inspection is possible.
max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: 3300mm/1455mm/1990mm, weight: approx. 2100kg.
Injection molding machine: clamping force: 5000kN, opening stroke: 1109mm, max. mold weight per plate/total: 5300kg/10600kg, drying time: 4.15s. Injection units: Unit 1: screw diameter: 90mm, injection flow: 623cm³/s, max. injection pressure: 2000bar. Unit 2: Screw diameter: 50mm, injection flow: 295cm³/s, max. injection pressure: 2000bar. Weight (without oil): Clamping unit: 33350 kg, injection unit: 9000 kg. ENGEL Viper 20 robot: max. manipulation weight: 17kg, max. vertical workpiece size: 600mm, travel X/Y/Z: 700mm/1300mm/3320mm. Total height of robot and machine: 4250mm, compact C-axis: pneumatic, torque: 30Nm, range: 0°-90°. Documentation available.
Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible.
Clamping force: 350kN, screw diameter: 25mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica, operating hours: 97325h. Dimensions X/Y/Z: 3700mm/1200mm/1700mm, weight: approx. 1800kg. Including core pull, interface for sprue picker. Card is defective. On-site inspection is possible.
Screw diameter: 55mm, max. injection weight: 434g, max. injection pressure: 1720bar, clamping force: 2200kN, min. installation height: 250mm. Dimension between the platens: 900mm, max. opening stroke: 750mm, centering bore nozzle side/ejector side: 125mm/125mm. On-site inspection is possible.
Clamping force: 1300kN, approach force: 50kN, opening force: 35kN/increased 350kN, opening stroke: 500mm, mold installation height: 250mm. Distance between platens: 750mm, clear column distance: 420mm x 420mm, mold platens: 605mm x 605mm. Movable mold half weight: 650kg, ejector force: 40kN, ejector stroke: 175mm. Screw diameter: 35mm/40mm/45mm, effective screw length: 23/20/18 L/D, max. screw stroke: 145mm, stroke volume: 139cm³/182cm³/230cm³. Shot weight (hp): 127/166/210g, injection pressure: 2500bar/2000bar/1650bar, injection flow: 128/168/212cm³/s, back pressure: 350bar/160bar, screw circumferential speed: 47/53/60m/min. Oil filling: 235l, dimensions X/Y/Z: approx. 4350mm/1600mm/1800mm, weight: approx. 4900kg. Including conveyor belt, Geiger handling, carousel, temperature control units. Operating hours pump/automatic operation: approx. 89000h/83000h. Documentation available. On ...
Clamping force: 500kN, screw diameter: 30mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica. Including core pull and interface for Angus picker. Dimensions X/Y/Z: approx. 4000mm/1200mm/1500mm, weight: approx. 2000kg, operating hours: 38330h.
Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control.
Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories.
Includes (1) Single Screw Extruder PME60/35, screw diameter: 60mm, screw length: 35D with degassing vacuum pump, barrel heating zones: 7x 20kW, throughput: 60-180kg/h, power: 70kW, with integrated electrical control cabinet with temperature controllers and all connections, continuously operating screen changer type L-026 with two channels, granulating nozzle for 20 strands, stainless steel water bath with deflection rollers and cooling fan, dosing unit with hopper, (2) Double Screen 800/300 stainless steel with double screen chute, round perforation 8mm for downstream connection of a transport suction unit, monitor control, strand pelletiser GR 250, infinitely variable collection heating, single knife, inclined cut, pneumatically pressed feed roller, outlet with slide (3) Dry Air Dryer E200 with one fully insulated 1000l V2A vessel, drying throughput: 250kg/h, stationary unit, easy clean ...
Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly.
Drive power: 110kW, with reversing Film Take-Off Kirion T 1300, Monoblow Head Kirion 120/300-1, further accessories and documentation.
screw size:45 mminjection shot weight in Polysterol:149 g/PSclosing pressure:1250 kN
PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible.
Throat depth: 915mm, spindle stroke: 110mm, table stroke: 200mm, max. opening between table and spindle: 310mm, controls: FAGOR, length: 905mm, width: 1550mm, height: 1700mm, weight: 648kg.
Forming surface: 750x436mm, heating output: 155kW, max. compressed air supply: 10bar, weight: 9.2t, operational hours counter: 43,589h.