Manufacturer:
(Category: 503)
TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Rotor impact mill Type: RPMX 1116 Year of construction: 2016 Drive power: 200 kW Rotor diameter x height: 1,150 x 160 mm Grain spectrum: 0 - 15 mm Grinding gap adjustment: 4 - 6 mm Number of rackets: 8 pcs. Circumferential speed: max. 90 m/s Dimensions (LxWxH): 4,600 x 2,000 x 2,800 mm Total weight: approx. 10,000 kg SPECIFIC COMMENT - Factory refurbished 2023 - Rotor wear parts completely renewed - Both outlet shafts renewed - Safety equipment renewed - Ideal for the recovery of valuable materials from metal-containing fine fractions (stainless steel and cable strands) - Without control (but can be offered)
TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Pre-ripper Type: VSR 1215 Version: Twin-shaft shredder / rotor shear Year of construction: 2018 Rotor diameter x length: 530 x 1,500 mm Operating hours: approx. 500 h Drive power: 2 x 90 kW Rotor speed (max.): 16 - 37 RPM Nominal torque: 33,000 Nm Number of tearing tools: 8 pcs. Width of tearing tools: 80 mm Total weight: approx. 22,000 kg SPECIFIC COMMENT - Incl. control cabinet/control - Incl. hydraulic pressure unit - Incl. steel substructure - Warranty for approx. 500 Bh - Shredding of domestic, commercial, bulky waste, waste wood, e-waste, plastics,...
Recycling machine trade AGICOM- Pedergnana OG: The mulcher is used to recover iron and aluminum from high-voltage lines. Cable cross-sections: Ø 10 - 50 mm Power consumption: approx. 31 kW / 380 V Dimensions: approx. (L x W x H) 1,300 x 1,300 x 1,740 mm Weight: approx. 3,500 kg
Vecoplan, not Lindner; Single-shaft shredder with feed hopper for refuse-derived fuel production, waste wood, waste and plastics, Material pusher to the rotor in the filling area Removal of contaminants from the pinball system, Screen inserts can be changed to your requirements! New rotor in 2017 with approx. 4000h running time New frequency converter in 2017 New service on the torque motor with 243kW, approx. 12900 operating hours in December 2023 Machine still under construction and available from February 2024 Subject to prior sale!
AGICOM recycling machines: Very good, almost as good as new single-shaft shredder for old cables, wood The cutting width or rotor length is 400 mm, 30 mm indexable cutting plates are installed. The machine has a hydraulically driven gate valve equipped with pressure monitoring. The machine has only 35 hours of operation and is still coated with the original paint in the cutting room. • Year of construction 2007 • Propulsion: 9.2 kW • Hydraulic pusher: 1.5 kW • Weight of single-shaft shredder Bano MAC400: approx. 850 kg
agicom recycling machines: Powerful, very powerful pre-shredder for old cables, scrap, paper/cardboard or plastic. Robust design, hydraulic pusher, easy replacement of the perforated screen, reversible blades Year of construction: 2021 Power: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight: approx. 1600 kg
Forrec AE-600R single-shaft shredder: Used and very powerful single-shaft shredder for a wide range of applications. Easy replacement of perforated screen, hydraulic pusher Technical data shredder Forrec AE-600R: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight shredder Forrec AE-600R: approx. 1600 kg
AGICOM recycling machines: Cable shredder/granulator IRS PM1840 used. Technical Data Cable Shredder: 5.5 kW, 32 A Perforated screen 10 mm; LxWxH: 135x120x212 cm approx. 550 kg
Metso 2000 shredder Opportunity for bale openers, bag openers, construction waste, bulky waste and containers! The right one for little money! Perfect for wheel loader loading or grabbing excavators! Electro-hydraulic drive With vibrating chute With control cabinet with Siemens touch panel Hydraulic power pack with hydraulic tank approx. 1000 liters with oil tank heating! Dismantling and loading from the site as is! Operating instructions 110kW electric motor
used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 2300 Year of construction: 2010 Specifications: Main drive power: 1 x 75 kW, 134 A rpm: 1500 Hydraulic drive power: 5.5/0.75 kW, 11/1.9 A rpm: 1.500 60s Cutting Crowns Weight: approx. 14,000 kg
used shredder / shredder Manufacturer: ZENO Type: ZTLL 1400 x 1600 Year of construction: 2010 Specifications: Main drive power: 1 x 45 kW, 81 A rpm: 1500 Hydraulic drive power: 2.2 kW, 5.0 A rpm: 1.420 Rotor flight circle: approx. 380 mm 40 mm cutting crowns 52 Tools/Cutting Crowns Weight: approx. 5,400 kg Hint: The gearbox housing had a hairline crack, which was glued. (see pictures) It may have to be replaced.
Used granulator Manufacturer: HERBOLD Type: SML 60/100-G3-2 Specifications: Drive power: 75 kW, 140 A 380 V, 50 Hz rpm: 1480 Machine weight: approx. 5,000 kg
used shredder Manufacturer: BOA Type: RINO 750 - 160 Year of construction 2022 Specifications: Drive power: 55 kW Throughput: 10 - 15 t/h Noise level: approx. 90 dB(A) Filling opening: 1,600 Rotor speed: 1,000 rpm Operating voltage: 400 V/50 Hz Insulation class: IP 54 including: - Changeover flap Optional: - with feed belt
used shredder Manufacturer: BOA Type: ALLIGATOR 550 - 100 Year of construction 2017 Specifications: Drive power: 55 kW Throughput: - 1,5 t/h for fine adjustment, and - up to 6.0 t/h with coarse setting Filler opening: 1,120 Rotor speed: 1,500 rpm Operating voltage: 400 V/50 Hz Insulation class: IP 55 Weight: approx. 5,200 kg
used single-shaft shredder Manufacturer: LINDNER Type: VEGA 1100 L Year of construction: 2013 specifications: Filling volume: 1.7 m³ Working opening: 1,100 x 1,800 mm Rotor length: 1,090 mm Rotor flight circle: 434 mm Rotor speed: 100 rpm. Drive power: 45 kW Pneumatic pusher: 6 bar Weight: approx. 6,000 kg
used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...
used roll splitting machine Manufacturer: BOA (MBM) Type: RSM Year of construction: 1990 specifications: Roll width max.: approx. 1,800 mm Roll diameter max.: approx. 500 mm Drive power: 3 kW Drive via an electric motor with spindle with task table
Roll splitting machine Manufacturer: PAAL Type: RS 100 / 200 Year of construction 1992 with screwed-in track roller guide and in closed frame construction specifications: Roll length maximum: 2000 mm Roll diameter maximum: 1000 mm Drive power: 7.5 kW Cutting force: 20 t Cutting speed: 4.8
Shredder Vecoplan, type HR 75/35, for wood, packaging material, bark, wood waste Manufacturer: Vecoplan Type: HR 75/35 Year of construction 1987 Drive: 45 kW Filling opening: 750 x 350 mm Rotor diameter: 700 mm Number of cleavers: 2-4 Chopping length: 5-30 mm Throughput: max. 35 cbm/h Screen hole: 65 mm, 2 x 35 mm Dimensions: approx. 1500 x 1500 x 1400 mm (LxWxH) Weight: approx. 4,400 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or for any errors.
3 Shaft shredder with HARDOX spirals (approx. 500x1700mm), complete hydraulic system with Brevini gearboxes, new base frame with new steel construction, new hopper 6 cbm, inlet-opening: approx. 1100x1700mm, in addition: 7 reserve spirals available