subcategories
(3rd category level)
Manufacturer:
(Category: 201)
Vertical panel saw Fabr. Striebig Standard II Type 6220 Built in 1993 Cutting dimension 5300 x 2200 x 80 mm shared budget Brakeable support rollers Workshop overhauled Delivery and installation ... more information
Description: - raise/fall and tilt of the main saw blade by handwheel - saw blade diameter max. 450 mm - main saw motor 5.5 kW - cutting length 3000 mmmain motor: 5.5 kW, serial number: 93-05-062, cutting length: 3,000 mm, table length: 3,100 mm, cutting width: 1,250 mm, swival range +/-: 0 -45 °, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 1,800 mm, weight approx.: 1,000 kg
Length of the rolling table: 3.300 mmcutting width: 800 mmMotor output: 5,5 kWCutting height: 145 mmSaw blade diameter: 450 mmSpeed: 2800/4000/5500 U/min.weight of the machine ca.: ca. 900 kg: Ja : Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
Manufacturer: Holzma, Type: HPP 81/42, Year: 1994, Program: Holzma, Cutting lenght mm: 4200, Working hight mm: 85, Vorschub SĂ€gewagen : ca.100, Min-max feed programming slider m/min: ca.80, Angle pressure fixture: yes, Saw Blade Diameter mm: 450, Number of clamping tools: 6, Main engine kW: ca.12,5, Feeding speed continous adjustable: yes, Feeding from front side: yes, Feeding speed continous adjustable: yes, Year :1994
Table crosscut saw Irion UKS 800 DS Masch. No. 1360 Stop left 7 m Stop right 3.5 m Feeder Roller conveyor 400 mm wide Roll 300 mm long with programming control with documentation with data storage L x W x H Machine: 1650 x 1650 x 1750 mm Built in 1994 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Manufacturer: Haffner, Type: DGS 124, Bauyeshr : 1994, Pneumatical clamping system: yes, SĂ€geblĂ€tter schwenkbar bis ° : 45-90-45, Schnitthöhe max mm : ca.150, SchnittlĂ€nge max mm : 200, SchnittlĂ€nge max mm : 200, Power saw engine kW: 2,9, Width adjustment by engine: yes, Saw blade diameter max mm: 500, rotations controlled: 2800, Year :1994
Much sheet saw with Electr. Width adjustment from 1 sheet Chain width 250 mm unit 220 mm cutting height of 150 mm 15 kw motor ... more information
Description: .Approx. Onsite Dimension. (l x w x h): 3,500 x 800 x 1,200 mm, weight approx.: 100 kg ... more information
Chain width 250 mm unit 220 mm cutting height up to 150 mm 15 kw motor ... more information
Multi-blade saw Cosmec SM 100 Machine No. 2632 Year: 1994 Production COSMEC Italy 22kW (30HP) 380V, 40 Hz Variable speed 5/30 m/min Saw blade min/max 250/300mm Max. cutting depth 100mm Width feed belt/transport chain 250mm Max. distance between 2 saw blades 230mm Minimum workpiece length 600mm Dimensions: 1650x1400x1300 Weight 1300kg
max. cutting width : 5300 mm max. cutting height : 2200 mm Saw blade diameter : 300 mm max. machining thickness : 80 mm Saw blade bore : 30 mm Swivel saw head : manual Saw feed : manual Saw blade speed : 4750 min-1 Slatted frame: evasive Mounting : freestanding Suction : external suction Locking saw beam : manual Weight approx. : 1200 kg
BrettbesĂ€umer Autojet used Cutting heights 18 - 100 mm, 3 variable axes â 2 variable stems â Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the bo ...
(with hydraulical width changer, year 2004) Cuting width 760 mm uting high 710 mm Stroke 500 mm With hydraulical width changer, year 2004 Log feeding, outfeed splitter guide. Clamping and auxiliary carriages. Top Machine in best contition ... more information
Sawblade tiltable: 45 °Length of the rolling table: 2.800 mmcutting width: ca. 1.100 mmMotor output: 7,5 kWCutting height: ca. 153 mmSaw blade diameter: 450 mmSpeed: 3/4/5/6.000 U/min.weight of the machine ca.: ca 1.000 kg: Ja : Ja : Hydraulisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting height: 125 mmMotor output: 3 kWcutting width: 700 mmSaw blade diameter: 450 mmcutting width: ca. 700 mmLength of the roller table: links. 2.000 mmLength of the roller table: rechts. 2.000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Table: 540 x 600 mm Cutting width: 480 mm Super cutting height: 385 mm Roll diameter: 500 mm Saw blade length: 4,080 mm Power: 2.2 kW Speed: 2,800 rpm with engine brake Dimensions: 810 x 945 x 1,970 mm Weight: approx. 210 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.
Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Table: 800 x 750 mm Cutting width: 680 mm Super cutting height: 480 mm Roll diameter: 700 mm Saw blade length: 5,000 - 5,150 mm Power: 3 kW Speed: 1,400 rpm Precision table swivel device with handwheel and rack Engine brake Dimensions: 1,290 x 800 x 2,300 mm Weight: approx. 580 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.
Manufacturer: DĂŒspohl, Type: DEA 150, Year: ca.1995, Control: hand, Pneumatical clamping system: yes, Schnitthöhe min-max mm: 120, Schnitttiefe min-max mm: ca.150 -150, Power saw engine kW: ca.3, Action controlled: yes, Saw blade diameter max mm: 350, rotations controlled: 4500, Year :ca.1995 ... more information
SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC MOD. TD1200 - CE RULES - n.2 motors 2 hp - n. 2 blades diam. 350 mm - min / max working length 220/1200 mm - cutting inclinations: horizontal +/- 35°; vertical +/- 35° - volt. 380/50 - year 1995 ... more information
Table saw Scheppach 400 V 3.3 KW Blade diameter 600 mm Key Push poles Very little used. ... more information