- A. MEIER (1)
- A.M.P.E.R.E. (1)
- AARDWOLF (1)
- ABAKUS (1)
- ABAWERK (1)
- ABB (1)
- ABUS (1)
- Adixen (2)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALCE (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTREX (1)
- ALTRONIC (1)
- ALZMETALL (1)
- AMADA (3)
- AME (1)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- AMP (4)
- ANEST IWATA (1)
- ANGELANTONI (1)
- ANGELO VECCHIO (2)
- ANYCUBIC (1)
- APV (1)
- ARI (1)
- ARNO (1)
- ARP (1)
- ARZUFFI (1)
- AS EXCLUSIV (1)
- ASECOS (2)
- ASSFALG (1)
- AT (2)
- ATEC (1)
- ATOM (1)
- AUSA (1)
- AVK (1)
- AVOCENT (1)
- BACHER (1)
- BANK (1)
- BASE (3)
- BAUER (2)
- BAXTRAN (1)
- BAYERN TOOLS (5)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BERNER (1)
- BETA (1)
- BETTER PACKAGES (1)
- BIG (7)
- BILZ (6)
- BINDER (1)
- Bito (2)
- BLACK STEEL (1)
- BMS (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BORG WARNER (1)
- BOSCH (9)
- BOSCH REXROTH (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BOTECH (1)
- BOY (1)
- BRADY (1)
- BRAZILIAN SHIPYARDS (1)
- BROVIND (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BUDERUS (1)
- BUHLER (1)
- BULLERJAN (1)
- BUSCH (1)
- BUX (3)
- BWF (3)
- BÖSSINGER (1)
- CA-02 (1)
- CABER (3)
- CALAMIT (1)
- CAME (1)
- Capstone (2)
- CARRELLIFICIO PADOVA (1)
- CASE TECH (1)
- CASTIGLIA (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CEMER (1)
- CERA (1)
- CFM (1)
- ... more
Manufacturer:
(Category: 2500)
New in: 1995
used
Ref.-No. 00579 Z1 Description Used intensive mixer Manufacturer Eirich Type R08 Built in 1995 maximum filling 60l / 90kg Industry 7322 Granulating zinc oxide dust Control Not available Machine description - R08 (mixed material temp. max. 80°C) - Star-tangle tool; 4-stage; Li.-Run - Wirbler drive power: 5.5kW - Wirbler drive speed: 1000 rpm - Wirbler rotation direction: Left-hand run - Wirbler speed: 340 rpm - Wirbler circumference speed: 6.2m/s - Wirbler drive type: V-belt - Mixing container drive: friction wheel Type of wear - mixing container with soil wear segments + Wear wall - Star-wire tool with armor - Wall scrapers with armor Accessories - Storage vessel V=115l with Ebro shut-off valve DN200 and Vibration motor - Ebro shut-off valve DN150 on mixing container cover mounted (transition) - Dosing conveyor screw for zinc oxide filter dust, incline ...
New in: 1995
used
This EDELHOFF DARR 1/80 press was manufactured in 1995. It offers a pressing force of 800 kN with adjustable strokes ranging from 20-80mm and stroke rates from 30-200 per minute. The machine features a substantial table surface of 810x860mm and a maximum distance between table and ram of 450mm. It weighs 9.5 tonnes, suited for robust operations in sheet metal machinery. The EDELHOFF DARR 1/80 machine we have for sale. For more information about this press, please reach out to us.
New in: 1996
used
Weighing range: min.50g to max. 5kg Accuracy: 0.5g Suitable for a bag length of 140 - 350mm Speed (clock): 15 pcs/min ... more information
New in: 1996
used
40 € Description: Serial number: 451652 Max. operating pressure: 11 bar Tmin: 10°C Tmax: 50°CApprox. Onsite Dimension. (l x w x h): 790 x 620 x 1,920 mm, weight approx.: 50 kg ... more information
New in: 1996
used
This FINN POWER TP2515I/21/AM Punching machine was manufactured in the year 1996. It is equipped with a Siemens SINUMERIK System 3 control unit. The machine has a punching force of 300 kN. ... more information
New in: 1997
used
1 aseptic Elopak filling machine line No E 5 suitable for ESL milk, UHT milk and fruit and Vegetable juice bottling. set at the moment for 3 formats Int. No.B 5, Series No. 453 Manufacturer: SHIKOKU-KAKOKI LTD Type: U-680A Year of construction 2007 with 3-lane run-off section Capacity 10,500 U/h Conveyor belts for individual packaging are manufactured by Polyketting BV Series No. 121614; Year of construction 2013 3 Elopak screw cap gluers a.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2005 Ref. 22111 b.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22121 c.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22122 d.) Individual packaging connection transport system from the Elopak filling machine to the 3 screw caps Gluing ma ...
New in: 1997
new
10000 liters diesel storage tank, tested as new. ... more information
New in: 1997
used
Available in stock 1 x Used Saer Electropump KF / 2. The equipment is used but in good working conditions. H: 55 - 5 m RPM: 2850 RPM Flow: 0.6 - 3.6 m3/h Voltage: 220 V Frequency: 50 Hz Horsepower: 0.75 HP / 0.55 KW ... more information
New in: 1997
used
Available in stock 1 x Used Westfalia Lub. Oil Separator, model OSA 20-96-066. The unit was installed in a HFO power plant that stopped operating. The equipment is used but in good working conditions. Note: We also have some original parts from GEA Westfalia to sell. If you are looking for something in particular, please contact us and we will see if we have anything in stock.
New in: 1997
used
110 € Description: Operator basket for crane Serial number C-031 Maximum load capacity 200 kg Internal dimensions: 750 x 700 x 1050 mm Hexagonal crane accessory with inside dimensions: 60 x 100-140 mmApprox. Onsite Dimension. (l x w x h): 1,200 x 1,500 x 1,150 mm, weight approx.: 100 kg ... more information
New in: 1997
used
This SIHN ring piece was manufactured in the year 1997. 10 units available. ... more information
New in: 1997
used
This PIVATIC P125 was manufactured in 1997. A punching machine capable of handling steel up to 450 N/mm² and stainless steel up to 700 N/mm². It features a cutting and punching length up to 2500 mm, with a coil width range from 300 to 1250 mm. Designed for efficient and precise sheet metal processing. Contact us for more information about this punching machine.
New in: 1998
used
70 € Approx. Onsite Dimension. (l x w x h): 800 x 800 x 700 mm, weight approx.: 50 kg ... more information
New in: 1998
used
Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16
New in: 1998
used
This KOMAGE Mechanical Powder Press was manufactured in the year 1998 in Germany by the Komage Gellner Maschinenfabrik GmbH. It has a pressing force of 50 kN. The machine is in a good condition for its age as serviced on an annual basis directly by Komage. ... more information
New in: 1999
used
2.500 € Description: Chiller MONTAIR Srl Serial number : 976999 Voltage : 400 V Power : 51,5 Kw Intensity : 126 Amp Refrigerant R-407/ Max load 63 Kg Max. working pressure : 24,5 Bar Approx. Onsite Dimension. (l x w x h): 3,400 x 2,200 x 2,016 mm, weight approx.: 2,600 kg ... more information
New in: 1999
used
100 € Description: Volume: 150 l Tmax: 50 °C HP / bar: 11 Tmin: -10°C Factory number: ,MB 29147511Approx. Onsite Dimension. (l x w x h): 600 x 400 x 1,400 mm, weight approx.: 80 kg ... more information
New in: 1999
used
An original control cabinet that was dismantled by PAAL Konti 125D, built in 1999. It is based on SIEMENS S5 controller. A complete control cabinet, functional ... more information
New in: 1999
used
Fixing plate, magnetic table pair for sale. It can be attached with screws to an injection molding machine, machine tool or elsewhere. This allows an injection mold or other iron with a maximum size of 245x230 mm to be attached. ... more information
New in: 1999
used
- Power supply ES 030-10 - Ulbrichtkugel ISP 80 - Built in 1999 - fully functional - Visit possible by appointment ... more information