saws used for sale

Code: 0280 Brand: COSMEC Model: SM 250 Automatic multi rip saw for wood, solid wood boards, wooden frames, furniture and various Technical data: Sturdy cast iron structure Carpet width mm 250 Max cutting height mm 100 Min length of pieces mm 300 Blade bearing shaft diameter mm 60 Variable feed speed Min/max blade diameter mm 250/300 Motor Hp 20 (Kw 15) Feed motor Hp 0,8/1,2 Worktable dimensions mm 1500 x 560 Weight kg 1750

SPECIFICATIONS: Machinable material thickness: max. 130 mm Saw blade: Ø min. 220 mm - max. 375 mm Conveyor width: 350 mm Installed power: 37 kW Installed power (band): 1.5 kW Workpiece length: min. 500 mm (with table min. 350 mm) Dimensions of the work table: 2000 mm x 700 mm EQUIPMENT: Tools for maintenance

Code: 0003 Brand: BOTTENE Model: PUSH 100 - CE Standard Computer-operated automatic crosscutting machine with pusher for cutting of wooden boards - CE Standard The board fed in is analysed by the pusher and the data processed by the computer, which optimises the length according to different criteria chosen by the user. The boards are fed in by a pusher controlled by a brushless motor. The blade is driven by a motor and pneumatic cylinder located under the machine base. Blade diameter min/max mm 400/550 F30 Blade speed rpm 2800 Cutting capacity: with blade mm 450 mm 300 x 120 - with blade mm 550 mm 350 x 150 Blade motor Hp 5,5 Pusher stroke mm 5000 Positioning speed 65 mt/min Working table height mm 915 Unloading table with side ejectors Suction inlet diameter mm 120 Overall dimensions of assembled machine: mm 9900 x 1850 x 1550 h Overall dimensions for transport: ...

Swivel sliding table saw WA80TE from Altendorf with 2-axis scoring machine and in good condition Sliding table length 3000mm Saw blade swivel from 0 to 46 degrees Drive motor 5.5kW with automatic motor brake Saw blade diameter up to 400mm Cutting height max. 125mm Cutting width up to 1000mm Swivel angle and height adjustment electrically via buttons Cut-to-length stop ruler up to approx. 3200mm Width stop can be folded down Suction nozzle 80 + 120mm Sliding carriage lockable in any position 1 set of plastic saw blades with matching scoring tool 3 splitting wedges 2-axis scoring unit 2 protective covers 2 emergency stop switches Operating instructions CE Mark Neat machine with usual signs of wear. Minor scratches in the sliding carriage, as well as two repaired small incisions. Original paintwork, only a few spots dabbed V-belt and protective cover renewed. Di ...

-350 mm x 2000 mm max wood cross-section -Circular saw blade D900 mm -Special saw was only about 5 hours in use after the overhaul >> Made in West Germany 100%  ... more information

Multi-saw WINTER MULTIMAX 170 - 500 XL – year of production 2021 – original manual and documentation - very good condition TECHNICAL PARAMETERS: max. cutting height 170 mm min. length of a single element fed for cutting 740 mm max. cutting width 500 mm feeding and receiving table 1200x600 mm max. disc diameter 505 mm sleeve diameter 80 mm saw spindle diameter 60 mm power of the motor driving the vertical support of the pressure rollers 0.75 kW main engine power 75 kW feed motor power 5.5 kW smooth adjustment of the feed speed on the inverter 2.5-24 m/min max width of element 850 mm table height from the base 820 mm transport dimensions (length/width/height) 3500 / 2020 / 2000 mm weight 4250 kg

Carriage length 3200 mm Motor power 5.5 kW Bmawcrk3xgg Scoring machine, motor power 0.75 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 38.2.2  ... more information

Raimann ProfiRip KR 310 M My. 2004 Multi-blade rip saw with 2 adjustable saw blades Track width 340 mm Total - passage width max 950 instead of 800 mm Cutting height with / without pressure board 115/130 mm Workpiece length 450 mm min Saw blade max. diameter 380 mm Saw blade min. diameter 250 mm Saw blade bore 80 mm Saw spindle diameter 65 mm Saw spindle speed 3900 rev / min Engine 30 kW Laser - directional lights 3 pc. Operating push 6 bar Infinitely variable feed - speed 8-48 m / min. 1.5 kW Weight 3400 kgs Voltage 400V/50Hz

Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well  ... more information

1 piece of scratch chain foerderer 900/500 mm (W/T) length = 34 m; Very good  ... more information

GATER MACHINE Knife heights 125 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 38.5.1  ... more information

Elektra Beckum BAS 450 DB Band saw Built in 1980 Motor 2.2 kW 400V 50 Hz Roller guide at the top and bottom Cutting height 300 mm G&-5079-M3CCNR  ... more information

Weibert K350 Format circular saw Format sliding table: 3.2m Engine: 5.5kW 400V 50Hz S1 Speed: 3800- 5200 rpm Saw blade diameter: max. 400mm Electrical height adjustment Electric swivel 0-45° Cutting height 90°: 120 mm Cutting height 45°: 75 mm Cutting width: 1250mm with pre-scratcher D=120 bore 20mm Electrical height adjustment Weight 1100kg

Festo Jigsaw G&-5078-M36LJ  ... more information

SAeGEWERKS MECHANIZATION MAYRHOFER IN TOP STATE Gate roller with pull-off with hydraulic lifting and vertical lyrical rollers with chain pull puller left and right with hydraulic unit and frequency roller gear 10 m long roll width 1.60 m table width 1.70 m roller drive electric SAFETY AT THE MACHINE PURCHASE NO good

Used ALTERDORF sliding table saw mod. F45 Serial number 07-08-10-142 Electronically controlled two-axis adjustment for tilt and cutting height with automatic gradage-dependent blade height correction Digital Rip Fence Viewer Maximum carriage stroke mm 5000 Maximum cut at the square fence mm 4420 Maximum tilt from 0 to 45 degrees Machine without engraver Maximum cut at rip fence mm 1350 Maximum blade diameter mm 550f Engine power 15 hp N. 3 blade rotation speeds: 3000/4000/5000 rpm Maximum cutting height 200 mm at 90 degrees Maximum cutting height 139 mm at 45 degrees Year 2007 EC

SPECIFICATIONS: Equipment: Motorized loading roller conveyor Motorized roller stroke Slide arm with 7 pneumatic grippers Panel saw with a cutting width of 4500 mm Door pad on felt-covered platforms Sliding arm with 8 pneumatic grippers, connected by a continuous rod Lateral alignment device Panel saw width 2500 mm Vibrating chute for picking up and removing waste Shredder WEIMA model WLH300, built in 2007, motor 18.5 kW Unloading gantry 3ERRE AUTOMAZIONI model 1131, built in 2007 - length approx. 13000 mm Pneumatically operated mechanical gripping unit Motorized roller conveyor width 1700 mm length 4000 mm Side stop with idle rollers, side aligner, retractable front stop Motorized roller conveyor, width 1600 mm, length 5000 mm, concealed front stop 2 motorized floor roller conveyors, width 1600 mm, length 5000 mm 4 floor roller conveyors, width 900 mm, length 5000 mm ...

Description 0043-664-2803850 Specifications: Cutting depth 85 - 165 mm Cutting depth at 45° 60-116.5 mm Cutting depth at 60° 42-82.5 mm Swivel range 0 - 60° Idle speed 1500-1800 1/min Rated power 2,800 W Weight 15.3 kg Suction connection 58mm Description: The carpentry hand saw with exceptional weight/performance ratio! This is only possible through the use of state-of-the-art magnesium die-cast alloys. Swivelling up to 60°, this makes the hand-held circular saws a universal partner. The easy-to-read scale on the rotary wheel of the cutting depth adjustment makes the work easier and saves annoying remeasurement. For optimal handling and better control, the carpentry circular saw is equipped with soft start, constant speed under load, speed reduction and overload protection. The easy-to-use stop system of the MKS and the adjustable suction nozzle make your work m ...

Automatic multi-platform saw with leaf adjustment and part back conveyor Neumann Type: MRF 16/4.000: Technical data: Follow later!  ... more information

Automatic optimization crosscut saw: Technical data: Follow later!  ... more information