- A. MEIER (1)
- A.M.P.E.R.E. (1)
- AARDWOLF (1)
- ABAKUS (1)
- ABAWERK (1)
- ABB (1)
- Adixen (2)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALCE (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTRONIC (1)
- AMADA (3)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- AMP (4)
- ANEST IWATA (1)
- ANGELANTONI (1)
- ANGELO VECCHIO (2)
- ANYCUBIC (1)
- APV (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- AS EXCLUSIV (1)
- ASECOS (2)
- ASSFALG (1)
- AT (2)
- ATEC (1)
- ATOM (1)
- AUSA (1)
- AVK (1)
- AVOCENT (1)
- BACHER (1)
- BANK (1)
- BASE (3)
- BAUER (2)
- BAYERN TOOLS (5)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BERNER (1)
- BETA (1)
- BETTER PACKAGES (1)
- BIG (7)
- BILZ (6)
- BINDER (1)
- Bito (2)
- BMS (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BORG WARNER (1)
- BOSCH (9)
- BOSCH REXROTH (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BOY (1)
- BRADY (1)
- BRAZILIAN SHIPYARDS (1)
- BROVIND (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BUDERUS (1)
- BUHLER (1)
- BULLERJAN (1)
- BUSCH (1)
- BUX (3)
- BÖSSINGER (1)
- CA-02 (1)
- CABER (3)
- CALAMIT (1)
- CAME (1)
- Capstone (2)
- CARRELLIFICIO PADOVA (1)
- CASE TECH (1)
- CASTIGLIA (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CERA (1)
- CFM (1)
- CODEMA SYSTEMS (1)
- COLD JET (1)
- COMAC (1)
- COMET (1)
- CONCEPT LASER (1)
- CONTEC (1)
- COSMOS UTENSILI (1)
- COYNCO (5)
- CTS (1)
- Custom made (2)
- ... more
Manufacturer:
(Category: 2500)
New in: 1998
used
Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16
used
Available in stock 1 x Used GrimmerSchmidt Compressor. The compressor was installed in a biogas valorization plant that stopped working. Now the equipment is stored in our warehouse. The equipment is used but in good working conditions. RPM: 6600 RPM Flow: 30 CFM Rating: 80 psig Main Motor Voltage: 460 / 380 V Main Motor Frequency: 50 Hz Main Motor Horsepower: 7.5 hp
New in: 2009
new
Available in stock 1 x NEVER USED Air Liquide Pressure Regulator DCn 300/3 Suitable for all industrial gases, including oxygen, acetylene and propane. Non corrosive and toxic gases excepted. The equipment was never used and is still inside the original packing. Maximum Flow Rate: 350 Nm3/h (N2) Maximum Inlet Pressure: 50 bar Adjusting Outlet Pressure: 1 to 18 bar
used
Available for sale 5 x Stenflex Expansion Joints, namely: - Stenflex Expansion Joint Type AS-2 DN40 PN16 - NEVER USED UNIT - Stenflex Expansion Joint Type A-1 DN80 PN16 - NEVER USED UNIT - Stenflex Expansion Joint Type AS DN100 PN16 - USED UNIT - Stenflex Expansion Joint Type AS-2 DN125 PN16 - NEVER USED UNIT - Stenflex Expansion Joint Type AS DN200 PN16 - NEVER USED UNIT Equipment in good working conditions.
used
Available in stock 1 x Used Fitting and removing device for cylinder liner. The tool was used for MAN engines. The tool is used but in good working conditions. ... more information
New in: 1989
used
Available in stock 1 x Used Bohmer Kugerlhahne Gas Ball Valve type FSK V 016.065 with Filter and Dungs Differential Pressure Switch GW 50 A4. We also have other elements of the gas train available, namely: 1 x Gas Pressure Regulator DN65 PN16 2 x Solenoid Gas Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Pressure Switch Maximum Operating Pressure: 500 mBar DN 65 PN 16
used
Available in stock 1 x Used Kiene Cylinder Pressure Indicator Model K-107. Indicator equipped with a 4†diameter, dual range (0-3000 PSI/0-210 Bar), liquid-filled bourdon gauge with an FRP case. Indicator furnished complete with a carrying case. Design Features: - Quick attachment to standard indicator valves; - High accuracy, liquid-filled, dual scale pressure gauge; - Minimum space required for installation; - Components designed for low maintenance, long life operation. The equipment is used but in good working conditions.
New in: 1997
used
Available in stock 1 x Used Westfalia Lub. Oil Separator, model OSA 20-96-066. The unit was installed in a HFO power plant that stopped operating. The equipment is used but in good working conditions. Note: We also have some original parts from GEA Westfalia to sell. If you are looking for something in particular, please contact us and we will see if we have anything in stock.
used
Available in stock 1 x Used Fitting and removing device for injectors. The tool was used for MAN engines. Tool in good working conditions. ... more information
used
Available in stock 1 x Used Injector Nozzle Test Stand. Use the injector nozzle test stand to verify the shape and atomization of the injected test fluid and to leak test the needle seating. The equipment is used but in good working conditions. ... more information
used
Available in stock 1 x Used Fuel Injector Nozzle Tester (400 bar). The equipment is used but in good working conditions. ... more information
used
Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC ... more information
used
Available in stock 1 x Used Tool for extraction of fire land ring. The tool is used but in good working conditions. ... more information
new
Available in stock 2 x NEVER USED Industrial Evaporative Air Coolers TSBD. The photo is only an example of the same model. The evaporative air coolers on sale have never been used and are still inside the original packaging. Specifications: Air flow: 18 000 m3/h Wind pressure: 180 pa Voltage / Frequency: 380 V / 50 Hz Power: 1.1 kW Ventilation type: Axial flow type Water consumption: 10 - 15 l/h Water storage: 25 L Dimension: 105010501050 mm Weight: 65 kg Outlet size: (lengthwidth) 670670 mm Noise:
new
Available in stock 2 x NEVER USED Industrial Ventilation Fans TSBD-3. The photos are only examples of the same model. The ventilation fans on sale have never been used and are still inside the original packaging. Specifications: Model: TSBD-3 Dimensions: 1100 x 1100 x 400 mm Flow: 32 500 m3/h Power: 0.75 kW Voltage: 380 V Frequency: 50 Hz Blade Diameter: 1000 mm Speed: 427 r/min Single phase
new
Available in stock 1 x Alfa-Laval Solenoid Valve Block (1763524-80). The equipment was NEVER USED. ... more information
used
Cylindrical test pins made of gauge steel Nominal - Ø 2.00 - 8.00 mm Grades 0.01 mm Content approx. 600 pieces Hardened, ground and lapped at call. ... more information
used
used
Volume: 400 ltr. Material: Stainless steel; --> Mixer equipped with a heating jacket. ... more information
new
Unused Compact Gully Sealing Pillow System Manufacturer Vetter For gullys from 30cm to 50cm diameter In a practical transport case Permissible operating overpressure 0.2bar Good oil and chemical resistance 2 pieces available. Protection of sewerage from hazardous substances. To stop dangerous liquids making their way through roads into the sewer system. Vetter Universal Gully sealing pads are immediately ready for operation. The sealing cushion is positioned directly in the drain of the gully and filled with air by means of the enclosed pressure bottle. As a result, the cushion presses against the drain walls and thus closes the drain. Special price