Manufacturer:
(Category: 309)
Including bottling line Rotor diameter: 320 mm Rotor width: 440 mm Drive motor 11 kW Weight approx. 800 kg ... more information
Material: Steel Engine: 15 kW Other data and price on inquiry. You can also get the entire system with all components. ... more information
Material: Normal steel Fan percussion More information and price on request The machine is extensively overhauled and then is as new as new. ... more information
AVIAN Engineering Model G46/ 60 Pinch Infeed Rollers Integral Blower Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs ThruPut 300 KG/H Cutting Chamber 620 x 460mm Hopper Opening 620 x 500mm ... more information
Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading
Year: 2018 - technically efficient, ready to work â after full service - engine power: 1.1 kW - hydro-pneumatic cutter feed - two pairs of short stroke clamps - to the movable post ... more information
- technically efficient, ready to work â after full service - pneumatic profile clamping - manual feed ... more information
VESPA 40/60/30 VGA Granulator for plastics 30 KW, 300-500 kg/h. Insertion opening mm: 620Ă500 Rotor diameter mm: 400 Throughput kg/h: 300-500 Rotor blade quantity/mm: 6 x 300 Stator knife quantity/mm: 4 x 300 Motor KW: 30,0 Dimensions mm: 1540x1190x2280 Weight kg: 1760 options: Material conveying blower 4.0 | 5.5 | 7.5 | 11 kW and Big Bag filling station. Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.
50/100/55 VGA granulator for plastics 55 KW, 700-900 kg/h. Insertion opening mm: 1020Ă650 Rotor diameter mm: 500 Throughput kg/h: 700-900 Rotor blade quantity/mm: 6 x 400 Strator knife quantity/mm: 4 x 400 Motor KW: 55,0 Dimensions LxWxH mm: 2400x1700x 3070 Weight kg: 4650 With material conveying blower 7.5 kW and BigBag filling station. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.
VESPA 35/50/15 VGA Cutting mill for plastics 15 KW, 150-250 kg/h. Insertion opening mm: 520Ă380 Rotor diameter mm: 350 Throughput kg/h: 150-250 Rotor blade quantity/mm: 6 x 250 Stator knife quantity/mm: 4 x 250 Motor KW: 15,0 Dimensions mm: 1180x880x1970 Weight kg: 1150 options: With material conveying blower 4.0 kW and big bag filling station. Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. VESPA Granulators for Plastics â Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options â Horizontally or diagonally separated housing with robust welded steel construction â The cutting rotor rotates in an extremely robust self ...
35/40/11 VGA Cutting mill for plastics 35/40 VGA, 11 KW, 120-200kg/h. Insertion opening mm: 420Ă380 Rotor diameter mm: 350 Throughput kg/h: 120-200 Rotor blade quantity/mm: 6 x 200 Stator knife number/mm: 4 x 200 Motor KW: 11,0 Dimensions mm: 1180x780x1970 Weight kg: 950 options: With material blower 4.0 kW Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.
60â x 22â Two Roll Mill Manuf.: Bridge UK With variable speed control Siemens S7 - 1200 Safety PLC. Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1rpm Manually adjustable guide plates Manual nip adjustment Failsafe Pneumatic Caliper brake for Emergency Stopping of Mill Flood cooled rolls with rotary unions fitted 8 outlet mechanical lubrication system to roll bearings David Brown gear box â ratio 980:65.1 High speed pinion / bull wheel drive to rolls Safety PLC control for Start up sequence and machine monitoring HMI fitted to main panel for status monitoring of machine Operation Controls â Rolls Stop / Rolls Start / Inch Reversetart / Inch
Buzuluk 84inch Two Roll Mill (Double Roller) Year 1986 Roller diameter 660 mm Length of roller 2100 mm Number of rollers 2 Drilled rolls Speed of the rear roller 36,2 m/min Speed of the front roller 29,6 m/min The ratio of the gear wheels 1 : 1,22 The roller bearings antifriction The consumption of the cooling water 12 m3 per hour Maximum gap between rollers 30 mm The main electric motor 160 kW, 985 operating speed/min, 380V, 50 Hz Gear ratio of gearbox i = 10 Machine dimension L x W x H 5500 x 4000 x 1960 mm Machine weight 35 860 kg
Meccaniche Moderne Two Roll Mill 1000mm (40â) wide x 400mm (16â) diameter Smooth rolls Motorised nips Tray fitted beneath mill rolls Complete with motor and control panel Compact Mill ... more information
Robinson 60â (1500mm) x 22â (550mm) Two Roll Mill Hand operated nips Water cooled rolls Rotary joints for steam heating / water cooling Electric Autostop (kicked reverse stop) Lunn Safety Bar Bull wheel drive The Mill sits on a fabricated bedplate With Gearbox, Motor and Control Panel ... more information
Two Roll Mill 42inch wide x 16inch diam. Right angle drive Brook Crompton Motor 50HP Lunn Safety Bar front and back of Mill Hand operated nips Compact ... more information
Cutting Mill - Wanner C17.26 Year of construction: 1999 Slow-rotating granulator with gearbox Power: 3 kW 2 stator knives, 12 rotor knives, the sieve - interchangeable Funnel inlet: 240x300 mm Grinding chamber opening: 240x170 mm It is very easy to clean the mill, which is especially recommended if the color of the ground fabric is changed often Price: On request
Granulator - Wanner D25.38 s Location: Lodz, Poland Year of construction: 2011 Low-speed granulator with gearbox, with cyclone and dust removal Power: 7.5 kW 2 stator knives, 18 rotor knives, the sieve - interchangeable Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is often changed All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in ĆĂłdĆș. Price: On request
Granulator - Wanner D25.25m Location: Lodz, Poland Year of construction: 2007 Low-speed granulator with gearbox Power: 4 kW 4 stator knives, 12 rotor knives, the sieve - interchangeable Hopper inlet: 380x260 mm Grinding chamber opening: 270x200 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is often changed Soundproofed mill All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in ĆĂłdĆș. Price: On request
Granulator - Wanner D25.38 s Year of construction: 2011 Location: Lodz, Poland Slow-rotating granulator with gearbox, with cyclone and dust removal Power: 7.5 kW 2 stator blades, 18 rotor blades, the sieve - interchangeable Rotor and blade are cooled with water Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm Automatic feeding of the regrind to the big bag It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in ĆĂłdĆș. Price: On request