shredders used for sale

SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...

SINGLE SHAFT SHREDDERS SPECIAL FOR PLASTIC SCRAPS, form 600 mm to 2.000 mm wide rotor., Adjustable counter-knives, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti-vibration, Machine prepared for discharge by conveyor belt, Bolted and hardened rotor shaft on gear box side (ant ...

Hartl impact mill, impact crusher of impact crusher Crusher Model: RMA 405 PC Breakers: PC205 Inlet 1450x850mm Mobile on crawler task tray / vorsieb, conveyor belt and permanent magnetic separator Drive 3408 CAT diesel engine.  ... more information

This machine with two motors each 11 kw was used for tire recycling complete with hopper and control panel.  ... more information

VECOPLAN VAZ 220/200 KNF, single shaft shredder for plastics, constructed in 2000, imfeed width 2200 mm, working width: 2000 mm, Rotor Ø 495 mm, n.56 knives size 60 x 60 mm., Rotor speed 125 rpm, 132 kW drive, 400V 50 Hz, Machine weight : about 14 tons, Upper ram, feeding hopper, various screens available, Electrical panel, Users manual, drawings available, This machine is offered totally reconditioned, (last group of photos is of a twin machine just reconditioned), width: 2.000 mm. (78.74), Power: 132kw

Manufacturer: Deltax Holder: Hydraulic holder Dimensions (L x W x H): 2010 x 902 x 1500 mm Knife length: 610 mm Number of strokes at 1/4 opening: 40 cuts at quarter opening Number of strokes at full opening: 12 cuts at full opening Measuring opening: 330 mm Cutting force: 206 tons Drive: 11 kw/32 CEE plug Weight: approx. 2250 kg Deltax_DTX600S with hydraulic holder (New machine) The DTX 600S has 20% more cutting power than the standard Deltax DTX600. This was achieved by installing a larger cylinder and using a smaller second pump. A larger first pump is used to maintain the same cutting speed. All other modifications are used to amplify the machine to handle the additional power. The weight gain due to the reinforcement modifications and the larger pestle is about 250 kg. Alternatively: Deltax DTX600 Difference Cutting force: 172 tons | Weight: 2000Kg | All othe ...

Manufacturer: Mc INTYRE Blade length: 150 mm Blade opening: 105 mm Cutting capacity: 25 tons Rods ST 37: 25 mm diameter Number of strokes at ¼ opening: 20 / min Number of strokes at ½ opening: 12 / min Number of strokes at full aperture: 9 / min Dimensions (L x W x H): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Control: foot pedal

Alligator scissors Lindemann Alibo The Lindemann Alibo has a mechanical hold-down. The scissor head is protected with a safety basket. Machine On hand Knife length : 760 mm Weight : 4200 kg Mouth width at the tip : 200 mm Cutting capacity: 0.45 kN/ mm² : Ø 70 mm Number of strokes : 20 – 40 cuts/min Dimensions: 4.20 x 1.50 x 1.80 meters Drive: 15 kw Hold-down: Mechanical

The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

Used JMC 407 Kat Alligator Scissors Alligator scissors JMC 407Cat The catalyst version JMC 407 has an additional "V-holder" in the cutting area for adjustment when cutting or opening the catalysts. In stock at the end of March 2021 Knife length: 407 mm Measuring opening: 250 mm Cutting capacity: 90 tons Round iron ST 37: 57 mm diameter Number of strokes at 1/4 opening: 63 / min Number of strokes at full opening: 11 / min Dimensions (L x W x H): 1550 x 880 x 1120 mm Weight: 880 kg Drive: 7.5 kw / 380 V Operation: Foot pedal

JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal

Alligator shear ideal for processing weapons Fully Guarded As New 660mm blade length  ... more information

With Electrical motor ... more information

Deck size: 2.000 x 5000 mm. - 2 Decks (Different deck-angle) - With electrical motors, cardan-shaft and springs - Can be sandblasted and painted. ... more information

L x W: 4.000 x 1.600 mm. - With frame, electrical motor, cardan-shaft and springs ... more information

Cone Dia.: 450 mm - With Electrical motor - Crusher will be overhauled, sandblasted and painted ... more information

Inlet opening: approx. 400 x 400 mm Rotor width: approx. 400 mm Rotor diameter: approx. 400 mm Stator knives: 3 Rotor blades: 3 Drive: 18.50 kW Feed opening: approx. 400 x 400 mm Rotor width: approx. 400 mm Rotor diameter: approx. 400 Stator knives: 3 Rotor knives: 3 Drive: 18.50 kW  ... more information

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knives: 4 Rotor blades: 7 x 4  ... more information

Rotor 500 mm diameter x 1000 mm width, housing with 6 rows of stator blades Granulator with high cutting sequence for fine grinding Drive motor 90 kW Typical applications are all cuttable materials such as pulp, paper, rubber, foam, etc.  ... more information