injection moulding machines used for sale

Arburg 470C 1300-350 with 40mm plasticising unit. The ‘C’ variant of machines from Arburg is one of our most popular requests (once refurbished). These machines were market leaders for quite some time and proved reliable and good value for money over the years. With a little refurbished magic from the team to bring them back to ‘almost new’, these machines now have a new lease of life. They might not be the most energy efficient, but they are by no means power hungry and when the low upfront cost is considered with low maintenance costs, it’s a very good value option. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and ...

Now fully refurbished and in our stock in Wellingborough, Northamptonshire is this tie-bar-less Engel Victory 330/90 Tech injection moulding machine. Fitted with a 35mm plasticising unit which gives a maximum shot weight of 134 (PS) (g). This is a high specification machine with double core pull, CC100 controller, singe pneumatic core pull and 8 zone hot runner controller built in. It comes complete with system disks to suit the machine. The unique design of these machines allows for large tools to be installed with ease and often much larger than could go in comparable 90T machines with tie-bars. A very versatile machine with proven technology and good support from the people at Engel UK. This machine is now holding maximum lock, has no detectable wear in the plasticising unit and is cosmetically excellent. You can find out more about the work we’ve done to this specific machine ...

Our team are currently working on this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fau ...

1.0 St. gebr. Injection Molding Machine with 6 - AXIS ROBOT Manufacturer: ARBURG Type: 5700C2000-675 GOLDEN EDITIO Year of Make: 2007 Clamping force: 200 tons Handlebar spacing 570 x 570 mm Screws DN: 45 mm Displacement: 318 ccm³ Moulded part weight 291 g/hp Control: SELGOCIA Equipment: -6 - ACHS robot Stäubli -1 x Core Pull -Bimetal cylinder -Temperature release up to 450° C -3 electric heating control circuits for tool heating

1.0 pcs. Injection molding machine Manufacturer: ARBURG Type: 420C1300-250 Year of construction: 1999 Clamping force: 130 tons Tie bar spacing 420 x 420 mm Screws DN: 25 mm Displacement: 106 ccm³ Moulded part weight 95 g/hp Control: SELGOCIA Equipment: -1 x Core Pull -Interface robot -Interface temperature control unit -Position-controlled auger

Dr. Boy 55 E Stock No.: 503451 Manufacturer: BOY Type: 55 E Control: Procan Year of Make: 2013 Operating hours: 43000 h Technical data closing page Clamping force: 550 kN Wooden dimensions h x v: 370 x 340 mm Plate size h x v: 360 x 335 mm Min. installation height: 250 mm Plate spacing max.: 650 mm Opening travel: 400 mm Ejector stroke: 80 mm Ejector force: 20 kN Centering of movable plate D: 110 mm Centering fixed plate D: 110 mm Technical Data Spray Side Screw diameter: 38 mm Capacity: 136.1 cc Spray pressure: 1508 bar Screw length: 17 l/d Screw stroke: 120 mm Screw speed: 450 min Worm torque: 490 N Plasticizing current: 128 g/s PS Number of heating zones: 3 Nozzle travel: 210 mm Dimensions & Weight Machine dimensions LxWxH: 3.665m x 1.13m x 2.04m Total Weight: 2780KG Equipment Screen text German Core pull hydraulic 1x Machine with water batter ...

Dr. Boy 55 E Stock No.: 503450 Manufacturer: BOY Type: 55 E Control: Procan Year of Make: 2013 Operating hours: 42000 h Technical data closing page Clamping force: 550 kN Wooden dimensions h x v: 370 x 340 mm Plate size h x v: 360 x 335 mm Min. installation height: 250 mm Plate spacing max.: 650 mm Opening travel: 400 mm Ejector stroke: 80 mm Ejector force: 30 kN Centering of movable plate D: 110 mm Centering fixed plate D: 110 mm Technical Data Spray Side Screw diameter: 38 mm Capacity: 136.1 cc Spray pressure: 1508 bar Screw length: 17 l/d Screw stroke: 120 mm Screw speed: 450 min Worm torque: 490 N Plasticizing current: 128 g/s PS Number of heating zones: 3 Nozzle travel: 210 mm Dimensions & Weight Machine dimensions LxWxH: 3.665m x 1.13m x 2.04m Total Weight: 2780KG Equipment Screen text German Core pull hydraulic 1x Machine with water ba ...

BOY 90 E Stock No.: 503452 Manufacturer: BOY Type: Boy 90 E Control: Procan ALPHA Year of Make: 2012 Hours: 49130 h Technical data closing page Clamping force: 900 kN Wooden dimensions h x v: 430 x 360 mm Panel size h x v: 635 x 610 mm Min. installation height: 250 mm Plate spacing max.: 725 mm Opening travel: 475 mm Ejector stroke: 130 mm Ejector force: 20 kN Centering of movable plate D: 110 mm Centering fixed plate D: 110 mm Tool weight: 800 kg Technical Data Spray Side Screw diameter: 42 mm Capacity: 157.8 cc Spray pressure: 2347 bar Screw length: 20 l/d Screw stroke: 155 mm Screw speed: 280 min Worm torque: 735 N Plasticizing current: 136 g/s PS Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.37m x 1.21m x 2.2m Total Weight: 3730KG Equipment Screen text German Core pull hydraulic 1x Machi ...

ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h in fully automatic mode Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement

ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement

Arburg 570 C 2200-900 (only 24.000 working hours) + robot Apex Clamping force: 220 tons Opening stroke: 650 mm Mould height: 300 mm Clamping platen daylight: 950 mm Tie bar daylight: 570 x 570 mm Mould clamping plattens (b x h) : 795 x 795 mm Ejector stroke: 225 mm Screw diameter: 50 mm Screw stroke: 200 mm Injection volume: 392 cm3 Shot weight: 359 g Injection pressure: 2000 bar Working hours: 24.191 Core pullers: 2x

Clamping force: 100 tons Opening stroke: 500 mm Mould height: 250 mm Clamping platen daylight: 750 mm Mould clamping plattens (b x h) : 580 x 580 mm Ejector stroke: 125 mm Screw diameter: 40 mm Shot weight: 172 g Working hours: 22.206  ... more information

Year of construction 2003 Machine is in good condition, and immediately available  ... more information

Production year: 2004 Injection unit: .../500 Screw diameter: 40 mm Specific injection pressure: 2019 bar Injection volume: 251 ccm Injection weight: 239 g Tool closure system: 120/... Clamping force: 120 t Tool plate dimensions: 740 x 680 mm Distance between columns: no columns mm Tool height: 300 mm Opening distance: 500 mm Max.Distance plates: 800 mm Ejector stroke: 130 mm General data: Pickup date: Immediately Dimensions (m) LxWxH: 5,1 x 1,5 x 2,1 m Weight: 7600 kg Instrumentation: - 2 x pneumatic valve - hot runner connection - bimetallic injection system - we have to the Picker machine

Clamping force: 200 t Year of construction: 2007 Injection weight in PS: 127 g Injection unit: .../350 Screw diameter: 35 mm Spec. Injection pressure: 2500 bar Spray volume: 139 ccm Injection weight in PS: 127 g L/D screw ratio: 23 Clamping unit: 2000/... Clamping force: 200 t Size of clamping plates: 728 x 728 mm Lights spar spacing: 520 x 520 mm Ejector force: 66 kN Aperture travel: 650 mm Max. plate spacing: 900 mm Ejector travel: 225 mm Fuel tank capacity OIL: 290 l

Clamping force: 130 t Year of construction: 1999 Injection weight in hp: 194 (hp) g Control type: Selogica Injection unit: .../350 Screw diameter: 45 mm Spec. Injection pressure: 1670 bar Spraying volume: 230 ccm Injection weight in hp: 194 (hp) g Hydr. Drive power: 22 kW L/D Screw Ratio: 18 Clamping unit: 1300/... Clamping force:: 130 t Size of clamping plates: 615 x 615 mm Lights spar spacing: 420 x 420 mm Ejector force: 40 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 175 mm General information: Fuel tank capacity OIL: 240 l Weight: 4100 kg Dimensions(m) LxWxH: 4.4 x 1.4 x 2.1 m

Year of construction: 1987 Injection weight in PS: 24 g Control type: Dialogica Injection unit: .../45 Screw diameter: 22 mm Injection weight in PS: 24 g Clamping unit: 150/... Lights spar spacing: 170 x 170 mm Aperture travel: 200 mm Max. plate spacing: 350 mm Ejector travel: 75 mm ... more information

Clamping force: 320 t Year of construction: 2007 Injection weight in PS: 131 / 131 g Injection unit: .../800 / 350 Screw diameter: 35 / 35 mm Spray volume: 139 / 139 ccm Injection weight in PS: 131 / 131 g Clamping unit: 320/... Clamping force:: 320 t Lights spar spacing: 720 x 720 mm Tool installation height: 300...1400 mm Ejector travel: 250 mm General information: Delivery Time: Natychmiast Weight: 17,000 kg Dimensions(m) LxWxH: 6.83 x 2.25 x 2.50 m Instrumentation: 1 x 8-speed water battery 1 x 12-speed water battery 1 x 4-way water battery 3 x hydraulic core pull control 4 x Air Valve Robot interface according to EUROMAP 67

Clamping force: 200 t Year of construction: 2002 Injection weight in PS: 72 / 45 g Control type: Selogica Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Spray volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force: 200 t Lights spar spacing: 570 x 570 mm Ejector travel: 225 mm General information: Weight: 8000 kg Dimensions(m) LxWxH: 5.1 x 1.8 x 2.2 m • 2 x Hydraulic Core Pull • 1 x Air Valve Snail: Top/Vertical: 30mm Bottom/Horizontal: 25mm

Arburg Allrounder 320K 700-100 Parameter: Clamping force: 70 t Year of construction: 05/2004 Injection weight in horsepower: 65 g Injection unit: .../100 Screw diameter: 30 mm Spec. Spray pressure: 1390 bar Injection volume: 71 ccm Injection weight in horsepower: 65 g Hydr. Drive power: 11 kW Cylinder heating capacity: 5 kW Clamping unit: 700/... Clamping force:: 70 t Size of the clamping plates: 446 x 446 mm Lights tie bar distance: 320 x 320 mm Opening travel: 350 mm Max. plate spacing: 550 mm Ejector travel: 125 mm General information: Weight: 2250 kg Dimensions (m) LxWxH: 3.2 x 1.5 x 1.9 m Equipment: 1 x hydraulic core pull control 1 x pneumatic valve