Manufacturer:
(Category: 1403)
Thermally insulated hall, whose supporting structure and part of the cladding as well as various accessories can be reused. SUPPORTING STRUCTURE: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to accommodate the building envelope consists partly of hot-rolled steel profiles and partly of cold-formed steel profiles made of galvanized strip steel. ROOFING: Sandwich panels, grey-white, on purlins partly made of hot-rolled steel profiles and partly of cold-formed steel profiles. WALL CLADDING: Sandwich panels, grey-white on wall substructure made of cold-formed and galvanised lightweight profiles. LOCATION: South Eifel, Rhineland-Palatinate. Viewing by appointment. NET SALES PRICE: on written request with complete company/contact details.
Steel hall complex built in three construction phases (consisting of a small production hall built in 1990, a large production hall built in 1997 and a warehouse built in 2007), which is to be dismantled in the short term. It is a thermally insulated hall complex whose supporting structure, building envelope and equipment can be reused. H6 - Production hall, built in 1990 with crane runway hL23.06 x hB13.32m x dH6.3m / fH8.8m = GFA 307.16 sqm ; Storage area on the upper floor: 5.07 x 12.95 = NF 65.66 sqm ; The primary construction consists of hot-rolled Euro profiles. The secondary construction for the building envelope is made of rolled steel, i.e. roof purlins made of IPE 160; Wall beam middle HE 140 A, and cold-formed steel profiles made of galvanized strip steel, C-profile wall beam top 140/90 (20/3 mm KRUPP STAHL KALTFORM. Sandwich wall: Hoesch-isowand TL 66 with profi ...
The three-aisled hall with the reference no. hbs4003s3 as well as the hall complex with the reference no. hbs1767sp are in good condition and can be rebuilt elsewhere. Description of the three-aisled hall: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to accommodate the building envelope consists partly of hot-rolled steel profiles and partly of cold-formed steel profiles made of galvanized strip steel. At the time of planning, a snow load of 0.75 kN/m² was assumed. The structural engineer must check whether there are sufficient reserves for higher snow load zones or which reinforcement measures are required to strengthen the supporting structure for your site. ROOFING: 1B+2C and 2B+3B THYSSEN thermodach sandwich panels, grey-white, on purlins partly made of hot-rolled steel profiles and partly of cold-formed steel profiles. ...
Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: MPB Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 160 x 50 mm Truss type: AUF'B'E0436 Agraffe: 4 HK (hooks) Clear width: 3,900 mm 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting
Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: MPB Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 120 x 50 mm Truss type: AUF'B'E0442 Agraffe: 4 HK (hooks) Clear width: 3,900 mm 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting
Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: MPB Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 120 x 50 mm Version: Head traverse Truss type: AUF'B'E0442 Agraffe: 4 HK (hooks) Clear width: 2,800 mm 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting
Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: MPB Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 80 x 50 mm Version: Head traverse Agraffe: 4 HK (hooks) Clear width: 2,800 mm 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting
Technical data of the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-3,0 Included in delivery: 01x CS Sigma Profile, II Choice Material color: sendzimir galvanized Total length: approx. 4,150 mm CS-Sigma profile: approx. 300x75x15 mm Material thickness: approx. 3.00 mm
Included in delivery are: 01x pallet rack traverse, used Material color: orange IPE profile: 100 x 55 mm Agraffe: 5 holes clear width: approx. 2,700 mm Per Agraffe: 5 holes Hole spacing: approx. 50 mm Diameter holes: approx. 11 mm 01x Set of screw material composed of: 10x Screws M10 10x nuts 10x Washers
Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Technical data for the pallet rack traverse: Shelving system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow Truss type: B105YC Box profile: 105 x 45 mm Agraffe: 3 hooks Clear width: 2,700 mm load per pair of trusses 2,500 kg, with the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired Transport or dispatch of this article is associated with additional costs, which can be queried separately from us depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) A Assembly, assembl ...
Technical data for the pallet rack traverse: Shelving system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow Truss type: 4BST Box profile: 80x45 mm Agraffe: 3 hooks Clear width: 2,700 mm incl. inner position angle: W = 20 mm H = 28 mm load per pair of trusses 900 kg, at the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired Transport or dispatch of this article is associated with additional costs, which can be queried separately from us depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) A Assembly, assembly our general assembly conditions must be observed Shelf in ...
Technical data for the pallet rack traverse: Shelving system: Meta (Thyssen) Included in delivery are: 01x pallet rack traverse, used Material color: orange INP profile: 100 x 50 mm Agraffe: 3 HK (hook) Clear width: 2,700 mm load per pair of trusses 3,000 kg, with the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting
Technical data for the pallet rack traverse: Shelving system: Nedcon Type: NS Included in delivery are: 01x pallet rack traverse, new Material colour: RAL 2008 light rotor gun Box profile: 130 x 50 mm Truss type: CC1305015A Steel quality: 275 MPa Agraffe type: PR2-5HK90 Clear width: 3,600 mm load per pair of trusses 3,200 kg at the same. distributed load 02x safety pins, new Version: kompl. galvanized To secure the longitudinal members against unintentional lifting
Technical data for the pallet rack traverse: Shelving system: Nedcon Type: NS Included in delivery are: 01x pallet rack traverse, new Material colour: RAL 2008 light rotor gun Box profile: 130 x 50 mm Truss type: CC1305015A Steel quality: 275 MPa Agraffe type: PR2-5HK90 Clear width: 3,300 mm load per pair of trusses 3,500 kg at the same. distributed load 02x safety pins, new Version: kompl. galvanized To secure the longitudinal members against unintentional lifting
Included in delivery are: 01x pallet rack traverse, used Material color: orange IPE profile: 100 x 55 mm Agraffe: 3 holes clear width: approx. 2,700 mm 3 holes per Agraffe Hole spacing: approx. 100 mm Diameter holes: approx. 11 mm 01x Set of screw material composed of: 06x Screws M10 06x nuts 06x Washers
Technical data for the mezzanine support: Manufacturer: Stow Included in delivery: 01x mezzanine support double-sided, used Surface: Ral 7001 silver-grey Cross-section: 150x150x6.0 mm S235 Base plates: 400x400x40 mm Length square tube: approx. 4,665 mm Length of square tube incl. base plate: approx. 4,705 mm Total height: approx. 4,750 mm Weight: approx. 180 kg | Pcs.
Included in delivery are: 01x Steel beam, used Material color: orange Clear width: approx. 2,645 - 2,700 mm Height box profile: approx. 100 - 110 mm Width box profile: approx. 50 mm Note: - The steel beams can be slightly bent, as well as dents or others Have damage. An agraffe is welded on both sides.
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 1,300 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm ... more information
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 2,600 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm ... more information
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 4,450 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm ... more information