cranes used for sale

Single-Girder Bridge Crane, Bridge Crane, Overhead Crane with Track, Bridge Crane with Electric Chain Hoist, Portal Crane; Used Machine Manufacturer: S+V 98 Ltd Type: DP-013-3200-400-800 Year: 2013/05 Last Inspection: 2023.03 Capacity: 3.2 tons Bridge Crane with Electric Chain Hoist: Width: 4000 mm Span: 3800 mm Weight: 1950 Kg Capacity: 3200 Kg Lifting Height: 2900 mm Trolley: Yale With Wired Remote Control Electric Travel and Lifting Crane Track: Length: 8220 mm Width: 4000 mm Height: 3800 mm Profile: HEA 220 Lifting Height: 2900 mm Span: 3800 mm

Manufacturer: BALKANCAR Type: 1 t Lifting height: 6 m 1 gear, suspension Wingspan: 8220 mm Width of the car cabinet: 1900 mm Manual longitudinal movement.  ... more information

Load capacity 1,6 t , Fast lift - slow lift , Chain length approx. 5.5 m, Driving speed is determined by button pressure strength, Crane re-checked by a specialist company! Function video via Whats App possible!  ... more information

Electric chain hoist steel R 6 Year of construction 1977 Pulling power 300 kg Weight approx. 70 kg L x W x H: 30 x 30 x 50 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Offer up to 2 round slings from Mennens here. WLL: 10000kg WLL: 14,8m They are in very good condition, no cracks, no cuts, blue shield is completely there. Last check 01/2021. After 07/2021 no more use.  ... more information

Offer up to 2 UTX Techlon 200 round slings (polyester) here. WLL: 20000kg EWL: 5m Unfortunately, they have been dragged over the hall floor a few times and are now quite dark, but they are technically very well preserved, have no cracks or cuts and the blue shield is completely present. Last test 01/2021, no more use after 07/2021

Offer up to 2 polyester heavy-duty slings from Certex. WLL: 40000kg EWL: 8.2m They are used, but in very good condition. No cuts, no cracks, blue shield completely present.  ... more information

DEMAG 3.2 t / 15 m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Year of construction: 2012 Type: EPKE Cat type: EK DR-Pro 3 - 3,2 Crane classification : DIN 15018 H2 B3 Radio control : KB, radio RC10 (two radio remote control available) Wingspan : 15022 mm Chassis (sides): 2956 mm, are mounted Load capacity : 3200 kg Weights : approx. 3258 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

ABUS ELKE - ELV 5t / 11m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : IR-H 10 radio control Wingspan : 11000 mm Chassis (sides): 2330 mm, are mounted Load capacity : 5000 kg Tare weights : approx. 2710 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

ABUS ELKE - ELV 5t / 15m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : DEMAG IR-H 10 radio control Wingspan : 15000 mm Chassis (sides): 3220 mm, are removed Load capacity : 5000 kg Tare weights : approx. 3950 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

Power fork with spring compensation for long goods or pallets payload 2500 kg Fork length 800 mm Year of construction 2015 Position of the forks according to customer requirements The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Swing boom crane boom crane with ZYBA-MAT Manufacturer: Strödter Type: ZP 60 / SAZ 60 D1 Built: 2014 New and unused Load capacity permissible load weight max: 25 kg Working radius approx.: 3,000 mm Stroke max: 800 mm Lifting speed max. : approx. 800mm/sec. Energy supply: pneumatic Mounting: Swing boom with stand column Net weight device (with load-carrying equipment): 287 kg Pneumatic working pressure: 6 bar Air quality required for maximum load-bearing capacity: clean, dry and filtered (5 microns) Air consumption max.: approx. 17 Nl/ double stroke ZYBA-MAT on the swivel boom Pneumatic balancing control with automatic scale

Column crane, slewing crane, column slewing crane used Manufacturer: VETTER (presumably) Type: WIZARD AS10-5.0 (presumably) Year of construction 5/2006 Payload 1000 kg Swivel range 270° Projection from column: approx. 5.4 m, boom profile height approx. 37 cm Bottom edge boom to floor: approx. 3.8 m Total height: approx. 4.3 m Base plate diameter approx. 1.2 m The previous owner has mounted a smaller base plate. In order to really use the 1000 kg, a 1450 mm base plate must be mounted (as can also be seen on the type plate)

230559704/40  ... more information

Unused wall swivel arm with manual suspension from VETTER VETTER PW1.25-4.0 wall swivel arm Projection 4 meters Load capacity 125kg Manual suspension VETTER SiCO-HF 500 Daytime capacity max. 500kg Carrier width 50mm - 220mm Comes from company dissolution Viewing and pick-up possible The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

1 factory-tested, well-preserved pillar jib crane Payload 500 kg RADIUS approx. 2,300 mm Overall height approx. 2,600 mm Bottom bracket approx. 2,350 mm Hook way approx. 4,000 mm make SWF Workshop inspection, 2017 equipped with an electric chain hoist, floor operation on the chain hoist movable working speeds: Hoist around 4.0/16.0 m / min Trolley gear by hand rotation by hand

1 very well preserved double girder crane ideally suited to the transport and use of long goods crane driving towards Load approx. 4 x 4,000 = 16,000 kg track width approx. 20.565 mm Hook path about 6.500 mm Make steel Year of construction/renovation 1990/1993 Workshop overhaul 2016 FEM 3 m Crane equipped with high-quality wind factory units, synchronous and separately controllable to apply loads, radio control Working speeds: Hoist CA. 1,2/12.0 m / min Trolley gear approx. 5.0/20,0 m / min crane chassis approx. 10.0/40.0 m / min

Capacity 20.000 kg Wingspan approx. 9,450 mm Hook way approx. 23,000 mm Make HEIMANN/SWF Year of production/workshop review 2006/2016 Crane radio control equipped with SWF double girder trolley, Working speeds: Hoist approximately 0.67/4.0 m / min Katz LG 5.0/20,0 m / min Crane chassis up to 30.0 m / min

4 factory-tested, very well preserved double girder cranes Load approx. 20.000 kg Wingspan approx. 16.650 mm Hook path about 5.000 mm Fabrikat MAN/SWF Year of production/workshop test 1995/2016 Cranes equipped with SWF double girder trolleys with reduced design to minimize the installation height, freely movable floor control Working speeds: Hoist approximately 0.32/3.2 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min