máquinas de bebidas usadas para la venta (1,753)

Línea de llenado unidireccional para cerveza Capacidad: 4000 bph Instalado para botella Stubby de 0,33 litros, botella Steinie de 0,33 litros Holdefleiss 24 cabezal de llenado a contrapresión con 6 cabezales coronadoras modelo early 70. Enjuagadora Fimer 16 cabezal 3-4000 bph. ¿Año? (De kahl Schlichterle 2016) Etiquetadora Gernep Labetta 6-480 SK 3-4000 bph. ¿Año 1996? Depall. Dansk Maskinmontasje 2016 Transportador Grib lateral, Carry Line 2016 Transportadores de botellas. Dansk Maskinmontage 2016

- Máquina estándar, con palets de pegamento - Con cabezal termorretráctil - Con transportador de botellas y mesa de recogida - Máquina sobre ruedas, móvil - En buenas condiciones de funcionamiento

Compuesto por: - 3 tanques 18000 litros - 3 tanques 15300 litros - 3 tanques 13000 litros - Con sistema de pasarela - Material: AISI 316 - Puerta de descarga cuadrada (abajo) - Descarga de puré motorizada - Alcantarilla redonda DN 400 (parte cilíndrica) - Drenaje restante, válvula de bola 40 Friedrich No. 2 - Desagüe transparente, válvula de bola 40 Friedrich No. 2 - Muestreo - Línea de bombeo con válvula de bola 40 Friedrich No. 2 - Cúpula 400 mm, excéntrica - Cúpula central DN 400, con un inserto de tamiz-cilindro unido a ella (Para mantener el pastel de puré húmedo) Dimensiones: - 3 tanques 18000 litros: 2000 mm, altura 5600 mm - 3 tanques 15300 litros: 2000 mm, altura 4800 mm - 3 tanques 13000 litros: 2000 mm, altura 4000 mm - Distancia al suelo: aprox. 550 mm

- Estructura en acero inoxidable - Longitud de la correa: 4000 mm - Ancho: 300 mm - Con 4 pies - Sin caja de control eléctrico

- Capacidad: 4000 l/h - Temperatura de entrada: + 40 ° C - Temperatura de salida: + 20 ° C - Temperatura refrigerante: aprox. 7 °C

- Especial: con pass-through para caja - Muy pocas horas de funcionamiento - Condición: Tan bueno como nuevo Dimensiones: - Longitud: 3300 mm - Ancho: 900 mm - Altura: 1800 mm

- De acuerdo con el diseño de los transportadores de botellas - Según el diseño del transportador de cartón - Con control central

- Área del filtro: 6 m2 - Máquina en buen estado

- Potencia: 20 a/h - Con comprimido integrado - Con solapa para ajustar las bayas y Apretando o simplemente apretando Dimensiones: - Longitud: 2250 mm - Ancho: 650 mm - Altura total: 1650 mm - Altura del bastidor en U: 600 mm

- Cilindro de vidrio de pie - Sin válvula de relajación de presión para la botella de gas - Conexiones: 1" gas

- Construido: 1996 - Semiautomático

- Material: acero inoxidable - Longitud: 3000 mm - Ancho: 600 mm Interior 1200 mm exterior

- Máquina monojefe - Dirección de marcha: R - L - Varios formatos de botella - Condición: muy buena

Overview  This wrap-around carton packer was manufactured in 2008 by the German company MEYPACK. The machine is in very good condition and was used only occasionally, as the primary packaging method at the facility was plastic crates. It is already dismantled and stored in a warehouse and is available immediately. Technical data  Capacity: 60 packs/minute with 2x5 (10 bottles) 40 packs/minute with 4x5 (20 bottles) Packing type: Wrap-around carton box Carton dimensions: Length: 120 – 300 mm Width: 210 – 400 mm Height: 100 – 350 mm Formation of packs: 2x5 and 4x5 Scope of Delivery  Meypack VP 531WA wrap-around packer

Overview  This stretch blow-moulding machine was manufactured in 2008 by Italian company KOSME (Krones Group). The machine is in good working condition and remains in production until end of November 2025. It will then be dismantled and craned out through the roof. Technical data  Capacity: 10,200 bph Working hours: ~50,000 h Formats: Neck finish: 29/21 (can be modified to 1881 or others) Preforms used: R-PET by Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Kosme linear oven 8 heating modules Kosme preform tipper with conveying system Kosme preforms feeding rail Kosme electrical cabinet Kosme Danfoss VLT drive Kosme touch screen control panel Set of spare parts (list on request) Service history: Kosme FBA maintenance Complete Kosme service in October 2024 Ongoing service by in-house technicians Scope of Delivery  Stret ...

Overview  This complete 1,500 L brewhouse system was manufactured by Spanish company Inox GC. It includes a three-vessel hot side, a 2,000 L mash/whirlpool tun, a 2,500 L lauter tun, and a 1,800 L hot water tank. The brewhouse comes with pumps, heat exchanger, CIP features, and a new AEM automatic gas burner for heating. The equipment is in good condition. Technical data Brewhouse System – Inox GC (1,500 L) Capacity per batch: 1,500 L Vessels: HLT, mash/lauter tun, kettle/whirlpool Material: AISI 304 stainless steel Heating: Compatible with automatic gas burner Includes: Temperature control panel, integrated pumps Isothermal Mash & Whirlpool Tun (2,000 L) Capacity: 2,000 L Insulation: 50 mm rock wool Features: Hinged lids, agitator with VFD, CIP system, PT100 probe Isothermal Lauter Tun (2,500 L) Capacity: 2,500 L Features: 5° sloped bottom, 500 mm manway, German V-screen, automatic  ...

Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, mixing- and CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 8,000 bph at 1,5 l  Formats: 0,5 l and 1,5 l bottles Filling product: Water and carbonated soft drinks Closure system: Plastic screw caps Sport caps Packing: Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Scope of Delivery  Blow moulder: SIPA, year 2002 Compressed  ...

Overview This carton packing line was manufactured in 1999 by the French company SAVOYE. The line has been professionally dismantled and is currently stored in a closed warehouse. It is designed for the packing of beer and carbonated beverages into various carton configurations and includes all necessary conveyors and technical documentation. Technical data Manufacturer: SAVOYE Models: SAVOYE 15 35, SAVOYE 07 10, SAVOYE 27 15 3B Year: 1999 Capacity: Up to 6,000 bottles/hour Product types: Carton Bottle diameters supported: 70mm, 80mm, 90mm Carton formats: 75cl – 2x(3x2) 75cl – 4x3 Documentation: Available Machine status: Dismantled and stored indoors

Overview  This cap feeding system consists of a vertical cap elevator, a centrifugal distributor, and a horizontal flat top air conveyor. The system was used for feeding 38 mm flat plastic caps in PET bottling applications. It has been dismantled, stored in a warehouse, and is immediately available. Technical data  Formats: Flat 38 mm plastic caps Dimensions: L 210 cm × W 75 cm × H 300 cm Power supply: 0.2 kW Application: PET bottles Scope of Delivery Vertical cap elevator | Marmoinox | AML-ZVE1 | 2016 Centrifugal distributor | Sacmi | - | 1997 Horizontal flat top air conveyor, 2 m | Sacmi | - | 1997

Overview This HEUFT Spectrum TX empty bottle inspector was manufactured in 2015 and is designed for the automatic quality inspection of empty glass bottles prior to the filling process. The machine belongs to the HEUFT Spectrum TX series, which uses the manufacturer’s reflexx inspection technology for high-precision bottle inspection. The system detects foreign particles, glass defects, and residual liquids inside bottles, ensuring that only compliant containers proceed to the filling stage. HEUFT inspection systems are widely used in modern beverage production lines due to their reliable optical inspection technology and modular design. The machine was installed in a high-capacity bottling line with a performance of approximately 33,000 bottles per hour, making it suitable for large industrial beverage filling operations. Technical Data Manufacturer: HEUFT Series: Spectrum TX Type: HB ...

Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data Capacity: approx. 15,000 L/h Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) Configuration: Multi-tank system (product tank, vacuum tank, saturator) Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) CO₂ content: approx. 6.5 – 7 g/l Electrical: 380 V, 3-phase Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  Premix beverage mixer | Stork J ...

Overview  This compact brewing, fermentation and packaging setup was manufactured between 2015 and 2022 by various European manufacturers The installation is designed for beer production in bottles and cans and consists of an isobaric filler, can seamer, small brewhouse, fermentation tanks, refrigeration unit, labeller and steel kegs. The equipment is already dismantled and stored und immediiately available. Technical data Application: Beer (bottles & cans) Filling type: Isobaric Filling & Seaming Bottle formats: 33 cl, 50 cl, 75 cl Bottle output: 350–400 bph (at −1°C to +1°C, 33 cl) Can formats: 33 cl, 44 cl, 50 cl Can output: 350–400 cph (at −1°C to +1°C, 33 cl) Brewhouse Capacity: 650 L Heating: Propane gas Electrical: Single-phase Fermentation & Cooling Total fermentation capacity: 9,800 L Stabilization capacity: 2,940 L Dimensions (refrigeration unit): approx. 1,100 ×  ...

Overview  The labeller was built in 2004 by Italian manufacturer KOSME. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Two cold glue stations. One label, one neck label, one counter label + one adhesive station. The labeler is working in counter-clockwise direction Technical details Capacity: 6,000 bph Labeling stations: 2 cold glue 1 self adhesive

Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery  Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model  ...

Overview  The bottle cleaning machine was built by the German company Krones in 2011. It was in operation at a large beverage producer until last and is still assembled.  Technical details  Capacity: 20,000 bph Formats: 0,25l and 0,75l Number of bottles per row: 22 Siemens S7 Equipment Label discharge  Rotary spraying  Continuous machine  Stainless steel body  Documentation  Software backup  Stainless steel pumps  Conductivity measurement  Finger task  Spare parts Bottle cell tips Bottle cell supports

Overview This crossflow filtration system was manufactured in 2006 by Germany Sartorius. The Sartoflow Compact 12 is designed for the gentle clarification of liquids, particularly in wine and beverage applications. The machine is still installed. Information regarding availability, visit possibility, maintenance history and reason for sale is Not provided. The system features a modular design with up to 12 filtration modules, of which 10 modules are functional and 2 modules are defective. Technical data  Capacity: approx. 3,600 – 12,000 L/h Application: Liquid clarification (wine and beverages) Configuration: Crossflow filtration system with hollow fiber membranes, up to 12 modules (10 active) Scope of Delivery  Crossflow filtration system | Sartorius | Sartoflow Compact 12 HF/A | 2006 | Modular system with hollow fiber membranes Filtration modules | Sartorius | 2006 | Ma ...

Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz  

Overview  This brewhouse system with malt mill and plate heat exchanger was manufactured in 2013 by Spanish company Slowbeer. The system consists of a 2‑vessel brewhouse (mash tun and boil kettle), a malt mill, and a plate heat exchanger, designed for complete brewing processes including mashing, boiling, and whirlpool. Technical data  Capacity: 250 liters per batch Application: Brewing Configuration: 2-vessel brewhouse (mash tun + boil kettle), complete brewing process (mashing, boiling, whirlpool) Heating system: Electric Temperature control: Automatic Safety system: Thermal safety alarm Cooling: Plate heat exchanger Electrical supply: 400 V, three-phase Installed power: 15 kW Scope of Delivery  Brewhouse (2 vessels) | Not provided | MB 250 E | 2013 | Mash tun and boil kettle, electric heating, automatic temperature control Plate heat exchanger | Sondex | S4A-IG16 | 2013 | Transmi ...

Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW

Overview  This shrink packer was manufactured in 2011 by the Italian company Giemme Thermo. The Giemme SLH is a film-only shrink wrapping machine used for secondary packaging of multipack PET bottles (1.5 L format). The machine is equipped with two parallel lanes, allowing high throughput and flexibility in packaging configurations. The machine is no longer in production but still installed and will be available from December 2025. A set of spare parts is included, and dismantling and truck loading can be quoted separately. Technical data  Capacity: 20 cycles/min Formats: 2 × (3 × 2) × 1.5 L 6 × (2 × 1) × 1.5 L Application: Cider, lemonade, soda, carbonated beverages Power Supply: 40 kW Dimensions (L × W × H): 650 × 170 × 250 cm Configuration: Dual-lane infeed for higher flexibility Film Type: Shrink film only (no tray) Condition: Very good; still installed and connected Avai ...