trabajo con chapas de metal usadas para la venta (3,298)

sheet width: 1020 mmplate thickness: 2.5 mm: 45.0 mmbending angle max.: 0 - 135 °weight of the machine ca.: 285 kgrange L-W-H: 1175 x 850 x 1175 mmDescription:Swivel bending machine with patented hydraulic auxiliary cylinder andRemote control. The machine is both manual (for thinner sheets) andmotorized (for thick sheets) operated. The motorized function is overa remote control operated with an emergency stop.Version S - with segmented upper beam for boxes and special profiles- Max. Bending angle 135 °- Max. Opening upper beam 45 mm- The HS Ergo is a further developed machine that uses a patient hydraulic auxiliary cylinder is supported- The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated.- the motorized function is operated via a remote control with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 €: 1014.93 €: 2050 mm: 16 mm: 16 mm: 13 mm: 13 mm: 10 mm: 260 mm: 260 mm: 200 mm: 1,5 / 6 m/min: 7.5 kW: 4300 mm: 1600 mm: 1550 mm: 6100 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are r ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 4010 mm: 1.5 mm: 2 mm: 4 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTSmillmeter precise adjustment of the clamping beamBMS MULTI-Touchcontrolelectric powered rotary shearelectronic depth stopflexible material supportsinclined bending beamoptimized geometry of the clamping beamsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on requestPrices ex works Germany.Transport and commissioningat customers place on request.The data for this ad was created with ModulMWS - the software solu ...

Grosor de la placa: 4,0 mm. Diámetro del rollo: aprox. 120 mm. Garganta: 450 mm. Consumo total de potencia: kWweight de la máquina, aprox. 0,48 tDimensiones de la máquina, aprox. 1,3 x 0,8 x 1,8 mm. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Auction-ID: A7-45761-796

Auction-ID: A7-45761-892

Auction-ID: A7-45761-869

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 145000 €: 2740.5 €: 6080 mm: 6 mm: 4 mm: 350 mm: 10 1/min: 0.5 - 2 °: 29 : 20 to: 1000 mm: 200 mm/s: 22 kW: 200 l: 5 Stk.: 900 mm: 630 mm: 6370 mm: 7300 mm: 2150 mm: 3400 mm: 2750 mm: 25500 kglinear guidedCNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantityUSB portCNC controlled cutting gap adjustment by the table (patented)oil coolermanual central lubricationcutting line illuminationfoldable ball screws for back gaugeballs in tablefoldable finger protection, 1.000 mmside lay with T-slot, tilting cam and scale5 support arms wit T-slotsoilfillinglight barrier on the back of the machineuser manual in GERMAN and ENGLISHPRICE FCA TURKEY(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la lámina: 1250 mm Grosor de la placa: 1,5 mm Distancia entre columnas: 1300 mm Apertura a la luz: 80 mm: 155 Consumo total de energía: Handbetrieben Peso de la máquina aprox: 0,18 Dimensiones de la máquina aprox: 1,4 x 0,8 x 1,3 m Máquina de doblado segmentos Anchos de segmentos: 2x50mm, 1x70mm, 2x75mm, 2x100mm, 4x150mm, 1x170m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la lámina: 2000 mm Grosor de la placa: 3,5 mm Distancia entre columnas: 2050 mm Apertura a la luz del día: 355 mm Consumo total de potencia: kWpeso de la máquina aprox: 2,8 tDimensiones de la máquina aprox: 3,5 x 1,5 x 1,5 m - Preselección de ángulo de flexión mediante interruptores de límite Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la lámina: 2500 mm, grosor de la placa: 4 mm, peso de la máquina, aprox. 5.000 kg. Dimensiones de la máquina, aprox. 3000 x 2000 x 1700 mm. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 70 -800 kNchamfer lenght: 2505 mmdistance between columns: 2125 mmControl: OP 2000 controlled axis: 7 throat: 420 mmstroke: 200 mmdayligth: 470 mmNumber of working hours: htable width: 60 mmtable height: 960 mmajustment speed: 100 mm/secworking feed: 10 mm/secreturn speed: 100 mm/secweight of the machine ca.: 6,3 tPatented Amada technology ensures absolutely correct bending results withoutbombing deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmtable width: 120 mmtable height: 900 mmcolumn arm: 320 mmreturn speed: 100 mm/secworking feed: 10 mm/seccontrol: Cybelec DNC 70 quantity of oil: ca. 250 ltotal power requirement: 11 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 4 x 2 x 3 m new control Cybelec CypTouch 12 - 3 axes Hydraulic tool clamp Crowning Swivel control, right front free-moving foot control lateral protective device (protective grille) rear protective device (protective grille)Machine is available in about 1-2 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6,0 mmdistance between columns: 3000 mmcutting angle: 0,5 - 3 °no. of strokes: 9 / 14 Hub/mindown holder: 18 total power requirement: 10 kWweight of the machine ca.: 4800 kgdimensions of the machine ca.: 3750 x 1600 x 1650 mmFeatures:- Hydraulic / slide-guided sheet metal guillotine shears- Electric backgauge 10-750 mm- Electric cutting angle adjustment- Manual cutting gap adjustment- 1x side stop- Front finger guard- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: max. 10 - 15 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °back stop - adjustable: 6.0 - 750 mmControl: ELGO P9521 total power requirement: 18.5 kWweight: 6300 kgrange L-W-H: 3900 x 2300 x 1630 mmFeatures:- Robust electro-hydraulic swing beam shear- ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s- 1x stable side stop With T-slot, flip-stop, and millimeter scale- 2x stable front support arms- Electric cutting length limiter Cutting length limiter to increase the stroke rate/min.- Manual cutting gap adjustment Centrally operated on the right side stand- Front support plates- Front finger/interference guard- Inching operation with push buttons on the left c ...

Ancho de la lámina: 1270 mm Grosor de la placa: máximo 4,5 mm: 4 mmroll diámetro: 120 mmroll Velocidad: 8 U/min. Diámetro de flexión: 180 mm Potencia total requerida: 2,2 kWweight de la máquina aprox. 1250 kg Dimensiones: 2470 x 750 x 1000 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

sheet width: 3050 mmplate thickness: 10 mmcontrol: Elgo 87 P2 : 11 - 31 Hub/mincutting angle adjustment: 1 - 4 °Number of hold downs: 16 Stück: 900 kg: 11 kWtable width: 700 mmtable height: 800 mmrange L-W-H: 4000 x 2220 x 1830 mmweight: 6300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6 mmrear stop: 1000 mmcutting angle: 0,5 - 3 °down holder: 18 Stkno. of strokes: 9-17 Hub/mintotal power requirement: 7,5 kWdimensions of the machine ca.: 3800 x 2000 x 1600 mmweight: 4500 kgEquipment:- electric backgauge- electric cutting angle adjustment- manual cutting gap adjustment- SP 9 control unit- Safety guard behind the machine incl. light barrier- front finger guard- 1x side stop- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6 mmrear stop: 1000 mmcutting angle: 1,2 °down holder: 14 Stkno. of strokes: 18 Hub/minoil volume: 150 ltotal power requirement: 11 kWdimensions of the machine ca.: 3900 x 1900 x 1600 mmweight: 5500 kgEquipment:- Hydraulic swing cut shears- ELGO control system- Electric backgauge 1000 mm- Manual cutting gap adjustment- Cutting length limitation- Ball rollers in the table- 2x front support arms- 1x front side stop with scale- Front finger guard, hinged- Rear safety device (protective grille + light barrier)- Foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 16 mmdistance between columns: 3100 mmno. of strokes: 16 Hub/minback stop - adjustable: 10 - 1000 mmcutting angle: 0,5 - 2,5 °down holder: 13 Stückoil volume: 300 ltotal power requirement: 22 kWweight: 14000 kgdimensions: 4100 x 2300 x 2000 mmFeatures:- Electro-hydraulic slide-guided sheet metal shear- With ELGO P9724 NC digital control unit Input of target/actual values from the backgauge possible Digital display- Electro-hydraulic cutting angle adjustment- Electro-hydraulic cutting gap adjustment- Front finger guard- 1x sturdy side stop, with T-slot & mm scale- 3x front support arms- Hydraulic sheet metal hold-down- 2x emergency stop buttons at the front- Rear safety guard (protective grille)- Original operating manual Special accessories included:- Backgauge system conveyor belt with pneumatic sheet metal holding device Conveyor belt with pneuma ...

Ancho del material: 650 mmcoil Peso: 15 Grosor del material: 16 mm Se estima el año de construcción, el sistema es como nuevo. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 36.0 tstroke: 250 mmflat steel: 200 x 10 mmworking feed: 6.0 - 24.0 mm/minreturn speed: 60.0 mm/minwork height max.: 900 mmtable:: 580 x 1170 mmtotal power requirement: 4.1 kWmotor: 400 Volt 50 Hzoil volume: 60.0 ltr.weight: 1100 kgrange L-W-H: 680 x 1170 x 1130 mm Current list price approx. € 28.000 Special price on requestFeatures:- Electro-hydraulic horizontal bending machine- Large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting- Several/various bending tools- Infinitely variable adjustment of bending speed and pressing force- 1x freely movable double foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 10 mmnumber of rolls: 21 Stückroll diameter: 80 mmband speed: 12 m/minstraightening cross-section: 5700 mm²Control: total power requirement: 60 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Superficie de trabajo: 3000 x 1500 mm: 5000 W: 25 mm Espesor de lámina para acero inoxidable: 20 mm Espesor de lámina aluminio: 12 mm Peso de máquina aprox.: 12.000 kg Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2600 mmstroke of upper beam: 265 mmthroat: 450 mmdayligth: 530 mmworking feed: 10,0 mm/secajustment speed: 160 mm/secreturn speed: 100 mm/secControl: CYBELEC ModEva 10S work height max.: 900 mmtable width: 104 mmback stop - adjustable: 800 mmoil volume: 250 ltotal power requirement: 18,5 kWweight: 10900 kgrange L-W-H: 4250 x 1700 x 2850 mm from a maintenance workshop - good condition () New price ~ 84.000 eurosFurnishing:- with DELEM numerical CNC control model DA 66W 2D graphical programming automatic bending sequence calculation and collision detection high-quality color LCD screen (TFT)- pivoting control, front right- controlled axes : Y1 + Y2 + X + R + CNC crowning (WILA)- CNC electric backgauge (X axis) Travel speed 500 mm/sec.- CNC electric height adjustment (R axis) Travel speed 350 mm/sec. Travel range 250 mm- 4x man ...

sheet width - max.: 3035 mmplate thickness: 4.0 mm STplate thickness: 2.5 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: 20 Hübe/mincutting angle: 1.7 °work height max.: 900 mmControl: ELGO total power requirement: 8.5 kWweight of the machine ca.: 4400 kgrange L-W-H: 3416 x 2250 x 1760 mmEquipment:- robust NC electro-hydraulic guillotine shears- NC electro-motorized backgauge with ELGO control unit TYPE 85- Manual cutting gap adjustment- front support table incl. recessed grips- 1x stable side stop, with scale and tilting cam- 3x stable front support arms- 1x freely movable foot switch- front finger guard- Rear metal slide- EMERGENCY OFF button at the front- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80.0 tchamfer lenght: 2570 mmdistance between columns: 2125 mmcolumn arm: 420 mmtable width: 60.0 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/secstroke: 200 mmdayligth: 470 mmtable height: 960 mmNumber of working hours: ~ 33.100 hoil volume: 90.0 ltotal power requirement: 9.0 KWweight of the machine ca.: 5750 kg.range L-W-H: 3630 x 2450 x 2550 mmEquipment:- AMADA CNC control, model OPERATEUR II Manual control for fine adjustment of the axes- CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2)- CNC-controlled backgauge adjustment (X1 X2)- CNC-controlled vertical adjustment of the fence fingers (R1 R2)- CNC-controlled adjustment of the stop fingers left-right (Z1 Z2)- Swivel operation, front left- 1x freely movable foot switch- Top tool holder with top wedge crowning (AMADA system)- Rear safety guard (safety grid)- Side safety guard (safety  ...

sheet width: 2070 mmplate thickness: 25 mmpre-bending: 18 diameter of upper rolls: 320 mmside roll diameter: 260 mmdiameter of lower rolls: 320 mm: 26 kW: 8100 kg: 4700 x 2000 x 2200 mmFeatures:- Hydraulic side roller adjustment- Conical bending device- 2 driven rollers- Hardened rollers- Hydraulic folding bearing- Mobile control panel- Foot switch- Safety device- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.