trabajo con chapas de metal usadas para la venta (3,277)

sheet width: 3050 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmwork height max.: 930 mmno. of strokes: 9 - 17 Hub/mincutting angle: 0.5 - 3.0 °down holder: 18 StückControl: SC 100 T engine output: 22.0 kWweight of the machine ca.: 9500 kgrange L-W-H: 4270 x 2200 x 2250 mm Good/well-maintained condition () Current new price approx. 80.000 eurosFeatures:- Electro-hydraulic/sliding table shear- HACO CNC control model SC 100 T” Preset positioning of the backgauge Digital display of actual position Electro-hydraulic cutting angle adjustment Electro-hydraulic cutting gap adjustment LCD display Emergency stop switch- NC electro-motorized backgauge, on ball screws- Hydraulically operated hold-down device- Front finger guard- Ball rollers in the support table Support table with recessed handles- 1x side stop, with mm scale- 1x front support arms- 1x freely movable foot switch- Rea ...

roll diameter: 162 mm: 50 mmShaft revolutions: 8,5 U/minpressure hydraulic cylinder: 100 kNtotal power requirement: 1,5 kWweight of the machine ca.: 450 kgdimensions: 1100 x 800 x 1500 mmDomestic equipments:- Direct drive of all three shafts- Single delivery of the side rollers- Horizontally and vertically usable- Hydraulically movable side rectifier (via control panel)- 2 digital displays for the feed rollers- Hardened rollers- Mobile control panelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 16 mmdistance between columns: 3050 mm: 15-1000 mmcutting angle adjustment: ja °cutting gap adjustment: ja mmconnected load: 30 kWweight of the machine ca.: 14,.5 tdimensions of the machine ca.: 4,0 x 260 x 2,55 mHydraulic guillotine shear with- ELGO control for backgauge- Cutting angle adjustment- Cutting length adjustment- Cutting length limitation (time dependent)- Sheet thickness adjustment- Back gauge with clearance function- Cutting line lighting- Side stop- 3 pcs. support consoles- good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 4100 mmdistance between columns: 3700 mmcolumn arm: 415 mmstroke: max. 215 mmdayligth: 410 mmajustment speed: 200 mm/secworking feed: 10.0 mm/secreturn speed: 150 mm/secwork height max.: 1080 mmtable width: 100 mmControl: CYBELEC oil volume: 160 ltr.voltage: 400 Vpower capacity: 8.5 kWweight: 10200 kgrange L-W-H: 4800 x 1800 x 2600 mmEquipment:- BEYELER electro-hydraulic CNC press brake- CNC CYBELEC control unit DNC 1200 PS/B” High-resolution screen Clear, concise menus in the operators language Tool and product library Swiveling control panel, front right- CNC-controlled axes (Y1+Y2-X)- CNC-controlled backgauge adjustment (X-axis) 2x manually adjustable stop fingers - Manual upper tool clamping- Manual lower tool clamping- Rear safety device (safety door)- Side safety device (safety doors)- Bending tools 1x set of split upper tools (ROLLERI TOP 175.26.R0 ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : Wechseltisch Laser sources from 3 - 30 kWTable dimensions:3 x 1,5 / 4 x 2 / 6 x 2 / 6 x 2,5 mThe shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.The system consists of the following components:Shuttle table system in longitudinal direction for simultaneous loading/unloading and cutting to reduce non-productive production timesEncapsulated cutting room with protective glazingCNC graphics control Siemens Sinumerik 840DLaser source Brilase or IPGCutting head with automatic focus adjustment, Durma or PrecitecCooling unit for cutting head and laser sourceCAD/CAM software LANTEK for programming including autonestingPositioning laserSheet check system (automatic detection of sheet position and dimensions)Automatic nozzle cleaningCentral lubricationSlug boxWorking ...

Presión: Plato T, grosor: 5 mm, ancho de la hoja: 40 mm, Potencia total requerida: - kWweight de la máquina aprox.: - tDimensiones de la máquina ca.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Grosor de la placa: - mmGarganta: - mmDistancia entre los centros del rodillo: - Requisito total de potencia: - kWweight de la máquina aprox: 160 kgDimensiones de la máquina aprox.: - mNo accesorios Para rodantes Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

plate width: 2000 mmsheet thickness - max.: 10 mmsheet thickness - min.: 3 mmnumber of straightening: 13 Rollersstraightening roll diameter: 145 mmstraightening feed: 16 m/minbale length: 2330 mmdistance b/n rollers centers: 150 mmdiameter of bottom rollers: 290 mmmain drive motor: 30 kWweight: 32 t- number of bottom rollers: 21/24- Number of supports (top/bottom): 3 /3- speedof adjustm. of traverse: 0,71 mm / sec- way oftraverse: -18 mm to +42 mm- max. swivellower traverse: 8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 50 mmworkpiece height: - mmwheel diameter: 250 mmgrinding wheel width: max. 40 mmturning speed range: 1500 + 3000 U/mintotal power requirement: 1,0 / 1,4 kWweight of the machine ca.: 100 tdimensions of the machine ca.: 0,65 x 0,45 x 1,15 mElectric 380 Volt: Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1530 mmplate thickness: 4.0 mmthickness at Niro-steel: 2.0 mmno. of strokes: max. 34 Hub/mincutting angle: 2.70 Graddistance between columns: 1540 mmwork height max.: 920 mmvoltage: 400 VControl: konv. engine output: 3.2 kWweight of the machine ca.: 1115 kg.range L-W-H: 2275 x 2220 x 1400 mmFeatures:- Robust motorized swing-arm guillotine shear- Break-resistant, torsion-resistant welded steel construction- Compact and easy-to-use machine design- Manual backgauge, adjustable from the rear Stepless adjustment across the entire travel range- 1x hold-down bar- 1x freely movable foot switch- Front, extendable table extension- Rear safety device- Original operating instructions Optional accessories included:- Sheet metal holding device for thin sheet metal blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 220 kNsheet thickness - max.: 6,4 mmtravel -x axis: 2500 mmtravel -y axis: 1270 mm: 90 m/min: 60 m/min: 108 m/min: 360 °/secpunch diameter: 76,2 mmworkpiece weight: 150 kg: 0,01 mm bzw. 0,01° : 15 Stücktool changing time: 1,5 - 6,5 secweight of the machine ca.: 11.050 kgdimensions: 6400 x 5800 x 2100 mmWorking hours: 30.430 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la hoja: mmPlate Grosor: mmPre-curvado: Consumo total de potencia: kWweight de la máquina aprox.

material width: 0220 mmcoil weight: 0,300 tcoil internal dia.: 270 - 500 mmcoil outside dia.: 900 mmband speed: 8 U/mintotal power requirement: 0,18 kWweight of the machine ca.: 0,115 tdimensions of the machine ca.: 0,90 x 0,90 x 1,25 mWith driveManual central spreaderMotor has only an on/off switchBrake mecanicalBand loop control via dancer roller in start/stop modeThe decoiler is runningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1030 mmplate thickness: 12.0 mmthickness at Niro-steel: 8.0 mmblade length: 1050 mmcutting angle: 3.0 Gradno. of strokes: ca. 10 Hub/minback stop - adjustable: 500 mmControl: konv. table height: 900 mmoperating pressure: max. 280 baroil volume: 150 lengine output: 11.0 kWweight: 1900 kgrange L-W-H: 1550 x 1150 x 1600 mm Machine from a maintenance workshop (!)Furnishing:- heavy / robust electro-hydraulic sheet metal plate shears- Machine body in a closed design as an all-steel welded construction- Knife upper cheek slides in a long downward direction over the knife edge. protruding plastic guides- Cutting is done hydraulically via two hydraulic cylinders- The upper beam returns to its starting position in two ways. Spring batteries on the side stands- manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale- manual cutting gap adjustment- 1x side sto ...

Bending length: 4200 mmpre-bending: 34 mmBending strength: 38 mmpower capacity: kWNumber of rollers: 4 StkAdjustable rollers: Stkdiameter of upper rolls: 540 mmdiameter of lower rolls: 500 mmside roll diameter: 365 mmwork speed: 0 - 8 m/mintotal power requirement: 55 kWweight of the machine ca.: 35 tControl: Haeusler Bendtronic 2.0 dimensions of the machine ca.: 7.5 x 2.1 x 2.4 mEquipped with:- Haeusler BENDtronic 2.0 control system- Smallest possible bending diameter with upper roller Ø540mm: 595mm (depending onspringback)- Roller bearings: Self-adjusting roller bearings- Max. cylinder force against upper roller: 3,245kN- Roller material: 42CrMo4 (1.7225)- Speed compensation between upper and lower roller: automatic whenthe two-roller drive option is selected- Roller adjustment: hydraulic- Tilting of the lower roller and both side rollers for cone bending: infinitely variable from th ...

sheet width: 2500 mmplate thickness: 4 mmdistance between columns: . mmControl: rear stop: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 2 mmdistance between columns: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitud: 3100 mm Altura: 120 mm Ancho: 120 mm Bloque de troqueles nuevo Precio de lista: 9,738 Euro Precio especial bajo demandaV-Aberturas: - 80,0 mm / 85 / R 10,0 con rodillos guía - 50,0 mm / 85 / R 5,0 con rodillos guía - 35,0 mm / 85 / R 4,0 - 22,0 mm / 85 / R 2,5 - 2x tornillos de montaje incluyendo cadena de enlaces Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

Presión: 40 tGarganta: 175 mmAltura de trabajo máx.: 1055 mmCarrera: 30 mmGrosor de la hoja - máx.: 8 mmPotencia total: 4 kWPeso de la máquina aprox.: 1020 kgDimensiones: 910 x 670 x 1930 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Presión: 50 tGarganta: 610 mmPotencia total requerida: 7,5 kWPeso de la máquina ab.: 1700 kgDimensiones: 1500 x 650 x 1700 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 215 mmdayligth: 385 mmajustment speed: 200 mm/secworking feed: 1-10 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10 mmNumber of working hours: 53.820 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 16.0 KVAweight of the machine ca.: 11250 kgrange L-W-H: 3640 x 2210 x 2375 mm- in checked condition - machine video -https://www.youtube.com/watch?v=23IbxRaZ2KAEquipment:- CNC electro-hydraulic press brake- including DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display tool & program library including new TFT-LCD industrial monitor- CNC controlled axes: Y1 + Y2 / X / R- CNC electro-motor / controlled back stop (X axis)- CNC electro-motor ...

rotary table dia.: - mmmax. dia. of grinding wheel: 150 mmwith manual ongoing: - turning speeds: 2850 U/mintotal power requirement: 0,45 kWdimensions: 465 x 316 x 302 mmweight: 10,7 kgNEW PRICE: ~ 200.00 EURODescription- Double grinding machines from OPTIMUM - a quality product for trade andindustry- Heavy-duty, durable industrial design with maintenance-free motor forcontinuous use- Extruded aluminum housing- Long service life and smooth running thanks to balanced rotor withhigh-quality ball bearings- Spark guard on each grinding wheel reduces flying sparks- Stable, adjustable workpiece support- Viewing windows made of shatterproof material- Vibration-damping rubber feet- Two universal corundum grinding wheelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho del material: 100 mmEspesor del material: 15 mmNo. Nº de rodillos de enderezamiento: 9 Avance de enderezamiento: 7 m/minPotencia total requerida: 0,75 kWpeso de la máquina aprox.: 380 kgDimensiones de la máquina aprox.: 710 x 920 x 1360 mmCaracterísticas:- 5x rodillos inferiores accionados- 4x rodillos superiores ajustables- Sección transversal máx. aprox. 800 mm²- Uso móvil con ruedas- Instrucciones de funcionamientoLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 200 tchamfer lenght: 3600 mmdistance between columns: 2650 mmdayligth: 500 mmthroat: 300 mmstroke: 250 mmworking feed: 10,5 mm/secreturn speed: 100 mm/secram stroke speed: 150 mm/sectable height: 900 mmoil volume: 500 ltotal power requirement: 37 kWweight of the machine ca.: 17800 kgdimensions of the machine ca.: 3710 x 1800 x 3390 mmEquipment:- Controlled axes Y1 + Y2- Manual X-axis with digital position display- Set of upper and lower tools- 2x stop fingers- 2x front support arms- Hand and foot controls- Side + rear safety guard- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tchamfer lenght: 4100 mmdistance between columns: 3100 mmdayligth: 425 mmthroat: 300 mmstroke: 225 mmworking feed: 10 mm/secreturn speed: 100 mm/sectable height: 900 mmoil volume: 260 ltotal power requirement: 11 kWweight of the machine ca.: 12000 kgdimensions of the machine ca.: 4400 x 1750 x 2500 mmEquipment:- Cybelec DNC 34 PC control system- Controlled backgauge 700 mm (X-axis)- Hydraulic tool clamping at the top- 2 support arms with sliding system- Upper tool- Lower tool- Side + rear safety device- 2 manual foot switchesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mmWeight: 8300 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8421x2250x2250 mmWeight: 5500 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3200x1960x1470 mmWeight: 1000 kgTotal power requirement: 8,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1295x1300 mmWeight: 1150 kgTotal power requirement: 16,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.