trabajo con chapas de metal usadas para la venta (3,283)

Dimensions (L/W/H): 2985x2160x2000 mmWeight: 2000 kgTotal power requirement: 30 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 4.0 mmthickness at Niro-steel: 2.5 mmcutting angle adjustment: 1.0 °back stop - adjustable: 10 - 1000 mmadjustment speed: 180 mm/sdown holder: 21 Stückstrokes per minute: 18 - 31 oil volume: 160 LControl: ELGO P8511 column arm: 200 mmdistance between columns: 3050 mm0: max. 300 barvoltage: 400 Vmain drive: 9.0 kWweight of the machine ca.: 4800 kg.dimensions of the machine ca.: 3660 x 2070 x 2140 mm from a maintenance workshopEquipment:- electro-hydraulic sheet metal shear swing cut- machine frame = all-steel welded construction- ELGO NC control model P8511, control panel at the front left for positioning the electro-motoric rear stop target/actual position value input possible adjustment by three-phase motor via toothed belt- support table with ball rollers there are recessed grips between the table plates- front finger guard- hydraulically acting s ...

sheet width: 3100 mmplate thickness: 2 mmrear stop: 1000 mmcutting angle: 1°06 °no. of strokes: 45 Hub/mintotal power requirement: 3,0 kWdimensions of the machine ca.: 3600 x 2200 x 1600 mmweight: 4500 kgEquipment:- Electric motorized backgauge- With digital ELGO position display- Manual cutting gap adjustment- 1x side stop with mm scale- 2x support arms- 1x freely movable double foot switch- Front finger guardSpecial accessories included:- Pneumatic sheet metal holding device for thin sheet metal cutsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la hoja: 2540 mmEspesor de la placa: 6 mmtope trasero: 900 mmSoporte inferior: 14 Stkno. Número de carreras: 20 Buje/minPotencia total requerida: 10 kWdimensiones de la máquina aprox.: 3100 x 2200 x 2600 mmpeso: 5000 kgCaracterísticas:- Lubricación central- Tope trasero eléctrico- 1x tope lateral 2350 mm- 2x brazos de soporte delanteros con tope 1700 mm- Protector de dedos delantero- Cuchilla de repuesto (usada)- Interruptor de pieLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro del tubo: 4 - 28 mm: 3000 mmradio de curvatura máx.: 90 frecuencia de carga conectada: 400 Vpotencia total requerida: 1,5 kWpeso de la máquina aprox.: 0,75 tdimensiones de la máquina aprox.: 3,7 x 1,2 x 1,5 mDobladora de tubos con mandril electrohidráulico con- Mandriles de flexión para tubos de 18 mm- Herramientas para: 8 mm, 10 mm, 12 mm y 18 mm- Interfaz de PC- Ordenador portátil- DocumentaciónVer imágenes para más accesoriosLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la placa: 125 mmEspesor de la placa: 2 mmAvance de enderezado: 5-30 m/minPotencia total: 1,5 kWPeso de la máquina aprox.: 460 kgDimensiones de la máquina aprox.: m- Altura de alimentación de la correa: 1.250 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro del tubo: 273 mmresistencia de la pared: 15,1 mmradio de curvatura mín.: 150 mmradio de curvatura máx.: 1250 mmpotencia total: 30 kWpeso de la máquina aprox.: 3,5 tdimensiones de la máquina aprox.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

working length: 2050 mm: 2.0 mmmax. wire thickness: 3.0 mmUnderfloor: 110 mmmotor strength: 165 mmmotor strength: 22 kWbending speed: 5.2 mm/minlength: 3150 mmheight: 1150 mmwidth: 850 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ancho de la chapa: 4040 mmespesor de la placa: 4,00 mmdistancia entre columnas: mmpotencia total: kWpeso de la máquina aprox.: 7,50 tdimensiones de la máquina aprox.: mTope trasero ajustable motorizado con pantalla digital de hasta 1000 mmSoporte neumático de chapaExtensiones laterales de la guía y la mesaLimitador de longitud de corteIluminación del borde de corteLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la chapa: 3100 mmEspesor de la placa: 6,00 mmDistancia entre columnas: mmPotencia total: kWPeso de la máquina aprox.: tDimensiones de la máquina aprox.: mTope trasero motorizado con pantalla digitalAjuste manual de ranuraLongitud de corte variableIluminación del filo de corteNuevas cuchillasLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la hoja: 3100 mmEspesor de la placa: 10,00 mmDistancia entre columnas: mmPotencia total: kWPeso de la máquina aprox.: 10,00 tDimensiones de la máquina aprox.: mTope trasero motorizado hasta 1000 mm con pantalla digitalTope lateral y extensiones de mesaLimitador de longitud de corteIluminación del borde de corteNota: El tope trasero es ligeramente inexacto (+/- 1 mm)Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Spanien : 49500 €: 945.45 €: 60 to: 500 mm: 5 : 40x11 mm: 32 mm: 350x15 mm: 120x10 mm: 45/40 mm: 150x10 mm: 5.5 kW: 1950 mm: 2000 mm: 1900 mm: 1900 kgwith bending station5 working stationsflat steel shear with device to reduce deformationangle iron shear with round- and squarebars openingtriangle notcherpunching stationpress brake device for flat steeltable at flat steel stationtable at notching stationlength stop 1000 mm with contact switch, for angle, flat or bar stationhydraulic drive2 foot releaseuser manual in GERMAN and ENGLISHSemipaxy:Increased repeat accuracy instead of time consuming laying out·including B&,R 15", CNC with touchscreenand integrated keyboard·automatic positioning in x- and y axis·manual feed of sheet to the stop·simple grafic programming by touchscreen·working area 1.000 x 400 mm·direct importing of DXF files p ...

sheet width: 2050 mmplate thickness: 2 mmstrokes per minute until: 38 cutting angle: 1,75 °table height over floor: 870 mmtotal power requirement: 3 kWweight of the machine ca.: 1520 kgrange L-W-H: 2,2 x 0,6 x 1,2 mElectric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with astandard geared brake motor via a chain connection to the main axle. theknives are of the highest quality. The optimal cutting angle secures thetogether with the sheet holder perfect cuts.Bearings and guides are maintenance and lubrication-free.Standard equipment: • Back gauge 665 with mm scale. •cutting edge lighting. • Section counter. • Table extensions 600 mm. •Right angle stop, left. • Movable 24 V foot switch with em ...

sheet width: 2020 mmplate thickness: 2 mmdaylight upper clamping: 122 mmbending angle max.: 135 °range L-W-H: 2,56 x 0,6 x 1,26 mweight of the machine ca.: 1020 kgUnused exhibition machine at a special price:Segmented top rail for bending box profiles, upper beam clamping hand-operated,manual bending beam actuation with weight compensation, degreescale, adjustable bend stop. Warranty = 12 months for single-shift operation.The bending performance refers to 380 N/mm² strength. Plus freight + packaging 270,--.To complement this, we have a Kapema motorized panel shear, model SMP 20/20, capacity 2050 x 2 mm with manual backgauge, cutting line lighting, etc. Pleaseinquire if you are interested.This is an exhibition machine at a special price, so we are selling it without any warranty.Machine. Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the softw ...

sheet width - max.: 1010 mmplate thickness: 4.0 mm STplate thickness: 2.5 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: max. 20 Hübe/mincutting angle: 1.5 °work height max.: 900 mmControl: ELGO total power requirement: 5.5 kWweight of the machine ca.: 2200 kg. from a maintenance workshop good condition ()Equipment:- Robust NC electro-hydraulic guillotine shear- NC electro-motorized backgauge Includes NC ELGO positioning control TYP 85- Electric cutting length limiter- Manual cutting gap adjustment- 1x side stop with scale- 2x support arms- 1x freely movable foot switch- Original operating instructions Special accessories included:- Pneumatic holding device for thin sheet metal blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tchamfer lenght: 2050 mmdistance between columns: 1550 mmthroat: 255 mmstroke: 165 mmdayligth: 475 mmworking feed: 9,8 mm/secreturn speed: 117 mm/secajustment speed: 150 mm/sectotal power requirement: 5,5 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: 2300 x 1500 x 2470 mmEquipment:- DELEM DA65 CNC control- Electric backgauge (X-axis), 600 mm- Hydraulic upper tool clamping- Front light barrier- Side and rear protective grilles- Manually adjustable stop bar, foldable (R+Z-axis)- Upper tool- 2x support arms- Machine feet- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la hoja: 750 mmLongitud de la placa: 1250 mmEspesor de la placa: 4 mmSuperficie table: 1600 x 1050 mmNo. Número de carreras: 180 Hub/minmax. diámetro de punzonado: 105 mmpresión de punzonado: 25 tpotencia total: 4,0 kWpeso de la máquina aprox.: 1,8 tdimensiones: 1,9 x 1,9 x 1,7 mPunzonadora y mordisqueadora- Lectura digital para los ejes X e Y- Armario de herramientas con herramientasLos datos de este anuncio se han creado con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la chapa: 1020 mmEspesor de la placa: 2 mmDistancia entre columnas: 1020 mmÁngulo de plegado máx.: 135 Potencia total requerida: 0 kWPeso de la máquina aprox.: 0,3 tDimensiones de la máquina aprox.: 1350 x 850 x 1175 mMáx. ángulo de flexión 135Accionamiento manual con muelle auxiliar en ambos lados. Apertura de la viga superior 40 mm,Vigas superior e inferior segmentadas,División de segmentos: 25-30-35-40-45-50-75-100-150-200-270 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

sheet width: 3000 mmplate thickness: 6 mmdistance between columns: 3200 mmspeed: . m/minrear stop: 1000 mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe backgauge is electric.The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to sale, our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us.You can find further offers on our website.Tours are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

espesor de la placa: 4 mm STespesor de la placa: 3 mm VAlongitud de la hoja: 225 mmpotencia del motor: 3,5 kWpeso de la máquina aprox.: 650 kgdimensiones de la máquina aprox.: 1250 x 900 x 1100 mmCaracterísticas:- 2x topes de inglete- 90 ángulo fijo- Interruptor de pieLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

sheet width: 1360 mmplate thickness: 06,0 mmdistance between columns: mmtable width: 455 mmwork height max.: 880 mmcutting angle: 1°30 °rear stop: 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3050 mm: 12,0 mm: -: 0,5-3,0 °: 1000 mmtable height: 930 mmwork height max.: 930 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hole punhing press: pressure: 100 toutput: 40 in 22 mmL-beam: 160 x 16.0 mmsquare edge steel: 50.0 mmround bar steel: 50.0 mmflat steel: 600 x 15.0 / 400 x 20.0 mmthroat: 610 mmengine output: 8.5 kWweight of the machine ca.: 3150 kgrange L-W-H: ca. 2200 x 1400 x 1830 mmEquipment:- Robust electro-hydraulic profile steel shear- Punching station with punch quick-change device and die holder- Includes large support table with movable stop- Continuous stroke adjustment with jog/setup mode- Triangular notching station with support table- Bar, profile, and angle steel shear- Flat steel station with support and guide table- Various punches and dies (drawer cabinet)- 1x electric contact length stop- 2x freely movable foot switches- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Recorrido X: 1000 mmRecorrido a: 600 mmRecorrido Z: 600 mmControl: Heidenhain TNC 426Nariz del husillo: 100-700 mmMesa de trabajo: 1.080 x 580 mmPeso máximo de la pieza: 550 kgRanuras en T: 7 Stk.Ranura en T - ancho: 14 mmAlmacén de piezas de herramientas con: 36 PlätzenPeso máximo de herramientas: 8 kgLongitud de la herramienta - máx.: 340 mmPotencia total: kWPeso de la máquina aprox.: 6,2 tDimensiones de la máquina aprox.: 4.790 x 5.330 x 2.905 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

plate width: 2000 mmplate thickness: 10 mmsheet thickness - min.: 3 mmnumber of straightening: 13 Stk.straightening roll diameter: 145 mmbale length: 2330 mm: 150 mmstraightening feed: 16 m/mindiameter of bottom rollers: 290 mmnumber of bottom rollers: 21/24 Stk.main drive motor: 30 kWweight: 32 t- speed of adjustm. of traverse: 0,71 mm / sec- way of traverse: -18 mm bis /to +42 mm- max. swivel of lower traverse: 8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6.0 mmcutting angle adjustment: 0.5 - 3.0 °down holder: 18 Stückno. of strokes: 8 - 14 Hub/minback stop - adjustable: 750 mmwork height max.: 770 mmControl: SP 8 total power requirement: 7.5 kWweight of the machine ca.: 4800 kg.range L-W-H: 3650 x 2100 x 1750 mm very little use () from a maintenance workshopFeatures- Guide-railed electro-hydraulic guillotine shear- HACO control model NC SP 8 Easy operation directly at the cutting table Adjustment of cutting angle + backgauge Retraction function from rear stop Electric cutting length limitation Emergency stop button, locking - Motor-adjustable and programmable rear stop- Electric/hydraulic cutting angle adjustment- Manual cutting gap adjustment, from the front- 1x side stop - 1,000 mm, with scale & T-slot- Front finger guard- 1x freely movable foot switch- Rear safety guard + sheet metal chute- Ope ...

Ancho de la chapa - máx.: 300 mmEspesor de la placa: 8 mmAcero plano: 80 x 10 mmLongitud de la hoja: 300 mmLongitud de la máquina: 860 mmAltura de la máquina: 565 mmPeso de la máquina aprox.: 172 kgCizalla de medición largaDistribuidor de máquinas con stock propio de 1600 m². Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

espesor de la placa: 4 mmEspesor de corte máx. A (60 kg / mm²): 3 mmlongitud de la hoja: 90 mmpeso: aprox. 30 kgdimensiones de la máquina aprox.: 0,45 x 0,30 x 0,2 m Unidad de entallado para instalación bajo una prensa hidráulica o excéntrica. Se estima que los espesores de corte son bajos. Distribuidor de máquinas con stock propio de 1600 m². Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

ancho de la chapa: 1270 mmespesor de la placa: 1,75 mmdistancia entre columnas: mmpotencia total: kWpeso de la máquina aprox.: 1,00 tdimensiones de la máquina aprox.: mPosibilidad de procesos de plegado manuales y automáticosÁngulo de flexión ajustable mediante potenciómetroAltura de la carrera de la viga superior y espesor del material preseleccionables mediante interruptores DIPCandel de doblado en buen estadoInstrucciones de funcionamientoLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.