clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 350 kN injection volume: 59 cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit: - clamping force: 350 kN - clamping platen size: 400 x 400 mm - Clear distance between tie bars: 270 x 270 mm - Mould installation height min.: 225 mm - Distance between clamping platens: max. 550 mm - Opening stroke max.: 325 mm - Ejector stroke: 125 mm Injection unit: - Screw diameter: 25 mm x 20D - Injection volume max.: 49 cm³ - Injection part weight: 59 g/hp - Max. injection pressure: 1,860 bar - Screw circumferential speed: 37 m/min - Cylinder heating: 4x 900 W - Nozzle heating: 300 W - Heating complete: 4,6 kW - Pump motor: 11 kW - Total power ...
clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 1300 kN injection volume: -- cm³ screw diameter: 45 mm platen size: 470 x 470 mm Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical pr ...
screw size: 30 mm closing pressure: 600 kN total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m injection shot weight in Polysterol: g/PS Selogica control Technische Daten / technical details: Schliesskraft / closing pressure 60 to Innenbreite zwischen den Säulen / inner width between columns 370x370 mm Plattengröße / plate size 570x570 mm Werkzeugeinbauhöhe / workpiece daylight 250 mm Formöffnungsweg / mould opening stroke 500 mm Plattenabstand / plate distance 700 mm Einspritzeinheit: / injection device Schneckendurchmesser / screw diameter 30 mm Spritzdruck / injection pressure 247 bar Gesamtantriebsleistung / hole drive capacity 70 kW Gewicht der Maschine ca. / weight ca. 3450 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the ...
Ref. no.: 18239 Hersteller: ARBURG Year of construction: 2000 Clamping unit Clamping force: 100 ton Opening stroke: 575 mm Distance between tie bars: 420 x 420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 570 x 570 mm Injection unit Screw diameter: 35 mm Injection volume: 144 cm³ Shot weight: 126 g Injection pressure: 1820 bar Measurements and weight Dimensions: 4,3 x 1,65 x 2,1 m Machine weight: 4950 kg Further information: There are 3 screw in the machine. 25-30-35 mm one on the machine others screw will be delivered on a pallet
Nº de referencia: 18273 Hersteller: ARBURG Año de construcción: 2008 Unidad de sujeción Fuerza de sujeción: 200 ton Carrera de apertura: 650 mm Distancia entre tirantes: 520 x520 mm Altura del molde mín.: 250 mm Ancho de apertura: 900 mm Tamaño de la platina (h x v): 728 x 728 mm Unidad de inyección Diámetro del tornillo: 55 mm Volumen de inyección : 474 cm³ Peso del disparo: 434 g Presión de inyección: 1650 bar Medidas y peso Dimensiones: 5,45 x 1,8 x 2,1 m Peso de la máquina: 7150 kg
Nº de referencia: 18271 Hersteller: ARBURG Año de construcción: 2005 Unidad de sujeción Fuerza de sujeción : 200 toneladas Carrera de apertura: 650 mm Distancia entre tirantes: 520 x 520 mm Altura del molde mín.: 250 mm Ancho de apertura: 900 mm Tamaño de la platina (h x v): 728 x728 mm Unidad de inyección Diámetro del tornillo: 55 mm Volumen de inyección: 474 cm³ Peso del disparo: 434 g Presión de inyección: 1650 bar Medidas y peso Dimensiones: 5,45 x 1,8 x 2,1 m Peso de la máquina: 7150 kg
Nº de referencia: 18368 Hersteller: ARBURG Año de construcción: 1997 Unidad de sujeción Fuerza de sujeción: 50 toneladas Carrera de apertura: 350 mm Distancia entre tirantes: 320 X 320 mm Altura del molde mín.: 300 mm Altura del molde máx.: 550 mm Tamaño de la platina (h x v): 446 X 446 mm Unidad de inyección Diámetro del tornillo: 30 mm Volumen de inyección: 85 cm³ Peso del disparo: 75 g Presión de inyección: 2200 bar Medidas y peso Dimensiones: 3,25 x 1,15 x 2,0 m Peso de la máquina: 2250 kg
Nº de referencia: 18286 Hersteller: ARBURG Año de construcción: 2001 Unidad de sujeción Fuerza de sujeción: 80 ton Carrera de apertura: 450 mm Distancia entre tirantes: 370 X 370 mm Altura del molde mín.: 250 mm Ancho de apertura: 700 mm Tamaño de la platina (h x v): 570 X 570 mm Unidad de inyección Diámetro del tornillo: 35 mm Volumen de inyección: 139 cm³ Peso del disparo: 117 g Presión de inyección: 2500 bar Medidas y peso Dimensiones: 4,06 X 1,39 X 2,12 m Peso de la máquina: 3800 kg
Ref. no.: 18326 Hersteller: ARBURG Year of construction: 2011 Clamping unit Clamping force: 50 ton Opening stroke: 300 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200-400 mm Opening width: 500-700 mm Platen size (h x v): 510 x 510 mm Injection unit Screw diameter: 25 mm Injection volume: 59 cm³ Shot weight: 54 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,2 x 1,5 x 2,1 m Machine weight: 3740 kg Additional information & extras Core pull: 1 pcs Accumulator: 1 pcs Robot Producer: Sepro Type: SR 55 Year: 2020 Weight: 56 kg
Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.
Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.
Screw diameter: 30mm, connected load: 42kW, operational hours counter pump/ automatic: 73,384/ 64,491h, with control software version 3.080, an on-site inspection is possible.
Clamp force: 350kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
Clamp force: 350kN, heating output: 4kW, connected load: 15kW, weight: 1.7t.
Clamp force: 850kN, heating output: 8.4kW, connected load: 9kW, weight: 930kg.
Clamp force: 850kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
Max. clamping force: 350kN, max. opening force: 31.1kN, distance between tie-bars: 270x270mm, weight: 1.8t.
Clamping force: 270kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
Clamping force: 500kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
Clamp force: 750kN, heating output: 11kW, weight: 3t.
Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t.
Clamping force: 100t, heating output: 6,1kW, connected load: 35kW, weight: 3.95t.
Clamping force: 85t, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
There are two identical injection moulding machines available.
Screw diameter: 35mm, clamping force: 50t, including Handling Walldorf, documentation and software.
Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation.
Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, without documentation.
Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible.
Distance between tie-bars: 520x520mm, screw diameter: 54mm, pump motor: 39kW, connected load: 44.9kW, weight: 6.63t, operational hours counter: 107,000h.
Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible.
Clamping force: 3200kN, distance between tie bars: 720x720mm, injection unit: 800, screw diameter: 45mm, with documentation. The machine is immediately available, complete and ready for shipment. There are no known defects. The machine has an Arburg Multilift, a parts conveyor belt and the safety fence. The machine is not equipped with the cooking systems (dryer + mixer). The machine is as good as new and was stored directly after leaving the Arburg factory, operating hours max. 100h only test run at Arburg. Machine does not have to be dismantled as it is still in delivery condition. On-site inspection is possible.
Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t.
Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available.
Clamping force: 250kN, heating output: 4.2kW, connected load: 15.2kW, weight: 2.1t, operational hours counter: 72.811h, with documentation, without accessories.
Clamping force: 250kN, heating output: 2.7kW, connected load: 69kW, operational hours counter: 97,696h, with documentation, without accessories, the hydraulic control valve is defective on the closing side.
Connected load: 51kW, operational hours counter: 72.552h, with documentation, without accessories.
Connected load: 86kW, operational hours counter: 58,952h, with documentation, without accessories.
Clamping force: 500kN, heating output: 9.4kW, connected load: 24.5kW, weight: 3.5t, operational hours counter: 68,747h, with documentation, without accessories.
Operational hours counter: 62,699h, with documentation, without accessories.
Operational hours counter: 85,318h, with documentation, without accessories.
Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible.
This injection moulding machine, the ARBURG 420C-1000-250, was manufactured in 2001. It is designed to deliver consistent performance and reliability for various plastic manufacturing applications. The machines robust design and ease of operation make it a valuable asset for producing high-quality moulded products. The ARBURG 420C-1000-250 machine we have for sale is well-maintained and ready to meet your production needs effectively. Contact us for more information.