Arburg 420c 1000-250 Closing unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 605 x 605 Clearance between columns (hxv) [mm] 420 x 420 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 144 Injection weight [g] 132 Injection pressure [bar] 1820 Electrical and hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 6.5 Dimensions and weight Net weight with control cabinet [t] 3.18 Dimensions (L x W x H) [m] 4.3 x 1.7 x 1.8
INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 106 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 2120 bars CLOSING UNIT Closing force: 1300 kN Mold thickness Mini / Max: 225/275 mm Max distance between tray: 800 mm Passage between columns: 470 x 470 mm Tray size: 650 x 650 mm GENERAL Heat output: 22 kW Total installed power: 33.9 kW
Injection Moulding Machine Manufacturer Arburg Allrounder Model 630 S 2500-800 Year 2014 Working hour: 70000 ( March 2023)
Arburg 470C 1500-400 injection molding machine Control: SELOGICA Tool closing system: Closing force: 150 t Clearance between columns: 470×470 mm Maximum table plate dimensions: 650×650 mm injection unit: Screw diameter: 45 mm Injection Weight: 232g Injection pressure: 1580 bar Injection volume: 254cc Equipment: Ejector: hydraulic Closing system: hydraulic 1 x hydraulic core Machine dimensions and weight: Weight: 4850 kg Length/Width/Height: 4.45×1.59×2.08 m Power: Pump/Motor: 18.5 kW Heaters: 9.4 kW Total: 27.9kW
Clamping force [kN] 250 Dimensions of mounting plates (hxv) [mm] 750 min./ max. mold height [mm] 127 - 227 Maximum opening width [mm] 352-542 injection unit Screw diameter [mm] 22 Injection volume [cm3] 34 Injection weight [g] 31 Injection pressure [bar] 2000
Arburg Allrounder 570H 2000-1300 Plastic injection moulding machine No electronic and mechanical issue All maintenance has been done by Arburg service
Arburg Allrounder 570H 2000-1300 Plastic injection moulding machine No electronic and mechanical issue All maintenance has been done by Arburg service
INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 139 cm³ Length / diameter ratio: 23 L / D Max injection rate: cm³ / s Pressure on the material: 2500 bars Laminating capacity PS: Kg / h Screw Speed: 58 RPM Hydraulic motor torque: 560 Nm Hydraulic Motor Power: HP Nb Temperature Zones: N CLOSURE UNIT Closing force: 1300 kN Opening stroke: 650 mm Thickness Mold Mini / Max: mm Max distance between plate: mm Passage between columns: 470 x 470 mm Tray size: 715 x 715 mm GENERAL Heating power: 22 kW Total installed power: 38 kW Amount of oil: 260 l. Dimension: (WxHxD) m. Weight: 6380 Kg
Arburg 270U 40T closing machine with quality flap 38000 pump hours Spindle D: 18mm Year 2006 Perfect condition and working. Extra: Fasti charger/dryer and two desuperheaters Immediate availability. Dr Boy 22A Machine 18000 pump hours D spindle: 22 year 2004 Perfect condition and working. They sold the two together.
Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] min300 Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 359 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53m x 1.79m x 2.2m Additional equipment: Conveyor belt Single-phase plastic feeder Picker
Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] min 300 Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 359 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53m x 1.79m x 2.2m Additional equipment: Conveyor belt Single-phase plastic feeder Dryer Picker
Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 injection unit Screw diameter [mm] 45 Injection volume [cm3] 286 Injection weight [g] 240 Injection pressure [bar] 2500 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20
Clamping force [kN] 1600 Dimensions of mounting plates (hxv) [mm] 1200 min./ max. mold height [mm] min 450 Maximum opening width [mm] 750 injection unit Screw diameter [mm] 45 Injection volume [cm3] 427 Injection weight [g] 360 Injection pressure [bar] 1720 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 15.8 Dimensions and weight Net weight with control cabinet [t] 9.5
Arburg 420C 1300-675 Injection molding machine Year of production - 2002 Selogica control Technical data of the closure: - Clamping force: 1500 kN -The clearance between the columns vertical: 420 mm -The clearance between the columns pos: 420 mm -Size plates of the table pos: 650 mm -Dimension of the vertical table plates: 650 mm -Mold height min: 275 mm -Plate spacing: 850 mm -Opening path: 575 mm -Ejector: 175 mm -Ejection: 40 kN Injection Specifications: -Screw diameter: 55 mm - Injection volume: 353 ccm -Injection pressure: 2080 bar - Screw rotation speed: 59 min -Worm torque: 880 N - Air injection rate: 214 g / s PS -1 hydraulic core -Hydraulic ejector Dimensions and weight: -Dimensions in: 4.82m x 1.48m x 2.18m -Total weight in: 5400KG
Clamping force [kN] 500 min./ max. mold height [mm] 200 Maximum opening width [mm] 450 injection unit Screw diameter [mm] 20 Injection volume [cm3] 31 Injection weight [g] 29 Dimensions and weight Net weight with control cabinet [t] 3.05 Dimensions (length x width x height) [m] 2.20 x 2
Arburg 320K 700-250 injection molding machine Year - 03/2004 PP materials used CLOSING UNIT Closing force (Ton) 70 Space between columns (mm) 320 × 320 Column diameter (mm) 60 Plate size (H x V) (mm) 476 × 476 Mold Height (Max.- Min) (mm) 400-200 Space between plates (mm) 650 Closing speed (mm / s) 88 (l / min) Opening stroke (Max) (mm) 250 Ejection force (kN) 30 Opening stroke (mm) 70 Cores (YES / NO) NO INJECTION UNIT Screw diameter (mm) 35 Injection weight (Max) (Material) (g) 121 Volume (cm3) 144 Injection pressure (bar) 1820 Injection rate (cm3 / s) 154 Nozzle force (Max) (Ton) 70 Nozzle stroke (Max) (mm) 240 Plasticization efficiency (g / s) 141 Number of heating zones 5 Heating power (kW) 6.1 OTHER DATA Oil tank capacity (Liters) 120 Weight (kg) 2190 Dimensions (LxWxH) (m) 3.37 × 1.405 × 1.99 Total energy consumption (Kw) 35 Robot Manufacturers ...
Arburg 630S-2500-1300 Injection Weight: 826g Closing force: 2,500 kN Screw diameter: 70 Injection pressure: 1470 Column spacing: 630 x 630 Plate size: 900 x 900 Min mold height: 300-700 Type of control: Selogica German Installed capacity: 68 Weight: 14000 Dimensions: 6.7 x 2.3 Hopper: No Robot nest: Yes
Closing force: 250 T Opening stroke: 600 mm Between columns: 630 x 630 mm Tray dimensions: 900 x 900 mm Minimum mould: 300 mm Max gap between trays: 1300 mm Motor power: 45 kW Heating power: 25.9 kw
Arburg 420C-1000-250 without hopper, with gas boost Make: ARBURG Type: 420C-1000-250 Built: 1999 Control: Selogica Country of origin: Germany Screw Dia: 35 mm Swept Volume: 144 ccm Shot Weight: 121 g Injection Pressure: 1820 bar Clamping Force: 1000 kN Tie Bar Distance: 420 x 420 mm Platen Size: 570 x 570 mm Mould height min.: 250 mm Opening Stroke: 500 mm Total day-light max: 750 mm Power: 28,5 kW Workinghours: 40702 h Dimensions: 5 x 1,80 m Weight: 3180 kg Equipment Language: German Manual
Arburg 520C-1300-350 with bimetallic plasticizing system Shot weight: 194 g Closing force: 1,300 kN Screw diameter: 45 mm Injection pressure: 1670 bar Column spacing: 520x520 mm The size of the plates: 715x715 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 32.2 kW Working hours: 95 616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Hopper: No. Core sequence: Yes Robot Socket: Yes
Description: Serial number 161491 Clamping force: 350 kN Mould opening force, max.: 31/100 kN Size of mould platens 400 mm x 400 mm Distance between tie bars 270 mm x 270 mm Mould opening stroke: 325 mm Mould height min.: 225 mm Max daylight: 550 mm Hydraulic ejector - stroke: 125 mm Ejector force forward/backward: 31 kN Screw diameter: 30 mm Ls/D ratio: 20 Injection pressure: 2400 bar Stroke volume: 67 ccm Shot weight, PS: 56 g Injection stroke: 95 mm Screw speed: 10 - 550 1/min Nozzle pressure: 60 kN Nominal capacity of pump motor: 11 kW Installed heating capacity: 3,4 kW Reservoir capacity: 190 ltr. Operating voltage 420 V, 50 Hz Dimension 3300 cX1200 x 1500 mm Weight 1500 kg Approx. Onsite Dimension. (l x w x h): 3,300 x 1,200 x 1,500 mm, weight approx.: 1,500 kg
Description: serial number 137300 Closing force 750 KN Size of mould platens 490 mm x 490 mm Distance between tie bars 320 mm x 320 mm Mould opening stroke: 375 mm Mould height min.: 250 mm Max daylight: 625 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: kN Screw diameter: 40 mm Ls/D ratio: 15 Injection pressure 1150 bar Stroke volume: 188 ccm Shot weight, PS: 158 g Injection rate: 201ccm/s Injection stroke: 150 mm Nozzle pressure: 72,3 kN Nominal capacity of pump motor: 15 kW Installed heating capacity: 5,56 kW Adjustable barrel heating zones: 3 + 1 Dry cycle time: 2 sec Reservoir capacity: 220 ltr. Operating voltage 420 V, 50 Hz Heating 5,56 kW Pump motor 15 kW Total load 20,6 kW Max. fuze rating 80 A Control voltage 24 VDC Dimension 4300 x 1850 x 1600 mm Weight 2400 kg Approx. Onsite Dimension. (l x w x h): 4,300 x 1,850 x 1,600 mm ...
Description: serial numberr 160654 Clamping force 1000 KN Mould opening force, max.: 35 / 390 kN Size of mould platens 545 mm x 545 mm Distance between tie bars 370 mm x 370 mm Mould opening stroke: 500 mm Mould height min.: 250 mm Max daylight: 750 mm Hydraulic ejector - stroke: 175 mm Ejector force forward/backward: 40 kN Injection unit Screw diameter: 35 mm Ls/D ratio: 20 Injection pressure: 1750 bar Stroke volume: 115 ccm Shot weight, PS: 121 g Injection rate: 190 ccm/s Injection stroke: 150 mm Screw speed: 513 r/min. Nozzle pressure: 70 kN Electric and Hydraulic Equipment Nominal capacity of pump motor: 18,5 kW Installed heating capacity: 5,4 kW Reservoir capacity: 240 ltr. Operating voltage 420 V, 50 Hz Total load 24,1 kW Max. fuze rating 80 A Control voltage 24 VDC Short circuit current rating 10 KA Dimension 4230 x 1500 x 1600 mm Weight 3090 kg App ...
Description: Serial nummer 152562 Clamping force: 500 kN Mould opening force, max.: 130 Kn Size of mould platens: 400 x 400 Distance between tie bars: 270 x 270 Mould opening stroke: 325 Mould height min.: 225 Max daylight: 550 Hydraulic ejector - stroke: 125 Ejector force forward/backward: 31 Screw diameter: 30 mm Ls/D ratio: 16,5 Injection pressure: 1290 bar Stroke volume: 70 ccm Shot weight, PS: 58 g Injection rate: 165 ccm/s Injection stroke: 100 mm Screw speed: 62 m/min Nozzle pressure: 60 kN Electric and Hydraulic Equipment Nominal capacity of pump motor: 15 kW Installed heating capacity: 3,9 kW Reservoir capacity:190 ltr.Operating voltage 380 V, 50 Hz Heating 4,0 kW Pump motor 15 kW Total load 19,0 kW Max. fuze rating 80 A Control voltage 24 VDC Short circuit current rating 10 KA Dimension 3700 x 1750 x 2000 mm Weight 1720 kg Approx. Onsite Dimension. ...
Description: serial numberr 177900 Clamping force 400 KN Clearance between columns: 270 mm x 270 mm Board dimensions: 446 mm x 446 mm Mold size: min. 200 mm Maximum opening distance: 350 mm Max distance between plates: 550 mm Screw diameter: 30 mm Injection volume / Injection weight: 70 ccm / 59 grams PS Injection pressure: 1550 bar Engine: 11 kW Heaters: 4.5 kW Operating voltage 400 V, 50 Hz Contrtol voltage 230 V, 50 Hz Total connected load 40,1 kW Control voltage 24 VDC Dimension 2656 x 1850 x 1476 mm Weight 2180 kg Approx. Onsite Dimension. (l x w x h): 2,565 x 1,850 x 1,476 mm, weight approx.: 2,180 kg
Description: serial number 160352 Clamping Force: 1000 kN Distance Betw. Tie-Bars: 270 mm x 270 mm Platen Size: 545 mm x 545 mm Mould Hight: min 250 mm Opening Stroke: 500 mm Max. Open Daylight: 750 mm Screw Diameter: 35 mm / 30 mm Injection Volume: 121 gram PS / 89 gram PS Injection Prresure: 1855 bar / 2350 bar Motor Power: 18,5 kW Heating Power: 5,4 kW Operating voltage 420 V, 50 Hz Heating 5,5 kW Pump motor 18,5 kW Total load 24,0 kW Dimension 4300 x 1500 x 1800 mm Weight 3850kg Approx. Onsite Dimension. (l x w x h): 4,300 x 1,500 x 1,800 mm, weight approx.: 3,850 kg
Description: serial number 193178 Clamping force: 350 kN Size of mould platens 242 mm x 250 mm Distance between tie bars 221 mm Mould opening stroke: 200 mm Mould height min.: 150 - 300 mm Max daylight: 350 - 500 mm Hydraulic ejector - stroke: 60 mm Ejector force forward/backward: 24 kN Screw diameter: 25 mm Ls/D ratio: 20 Injection pressure: 2000 bar Stroke volume: 49 ccm Shot weight, PS: 45 g Injection rate: 54 ccm/s Injection stroke: 100 mm Nozzle pressure: 50 kN Nominal capacity of pump motor: 7,5 kW Installed heating capacity: 4,3 kW Adjustable barrel heating zones: 3+1 Reservoir capacity: 80 ltr.Operating voltage 400 V, 50 Hz Contrtol voltage 230 V, 50 Hz Total rated current 47 A Total connected load 26 kW Control voltage 24 VDC Dimension 2600 x 1500 x 1900 mm Weight 1120 kg Approx. Onsite Dimension. (l x w x h): 2,600 x 1,500 x 1,900 mm, weight approx.: 1 ...
Description: Closing unit: , closing force 350 kN, ,random force 32.5 kN, opening force 25 kN Opening stroke max. 350 mm Tool installation height 175 mm Distance between the clamping plates max. 525 mm Ejector force 30 kN, ejector travel ,125 mm Injection unit: screw diameter 30 mm, effective screw length 20 l/d, screw stroke 110 mm Stroke volume 78 cm³ Injection part weight 65 g Injection pressure 2200 bar Approx. Onsite Dimension. (l x w x h): 3,200 x 1,200 x 1,900 mm, weight approx.: 3,200 kg
Description: Umbaumöglichkeit horizontal/vertikal für Spritzeinheit Spannkraft 350 kN Approx. Onsite Dimension. (l x w x h): 2,700 x 1,500 x 2,500 mm, weight approx.: 1,800 kg
Description: Schließeinheit: Schließkraft 500 kN, Zufallskraft 32,5 kN Öffnungshub max. 350 mm Formeinbauhöhe 225 mm Abstand zwischen den Klemmplatten max. 575 mm Lichtsäulenabstand 320 x 320 mm Auswerferkraft 30 kN, Auswerferweg 125 mm Einspritzeinheit: Schneckendurchmesser 45 mm, effektive Schneckenlänge 18 l/d, Schneckenhub 145 mm Hubvolumen 230 cm³ Gewicht des Spritzteils 194 g Einspritzdruck 1600 bar Approx. Onsite Dimension. (l x w x h): 3,200 x 1,200 x 2,100 mm, weight approx.: 2,450 kg
Description: Closing unit: , closing force 350 kN, ,random force 32.5 kN, opening force 25 kN Opening stroke max. 350 mm Tool installation height 175 mm Distance between the clamping plates 525 mm Light column spacing 270 x 270 mm Ejector force 30 kN, ejector travel ,125 mm Injection unit: screw diameter 25 mm, effective screw length 24 l/d, screw stroke 110 mm Stroke volume 54 cm³ Injection part weight 45 g Injection pressure 2500 bar Including DÜRRSCHMIDT extraction unit ,EG-M, year 1999 Z-path 1000 mm, X-path 300 mm, Y-path 700 mm Approx. Onsite Dimension. (l x w x h): 3,300 x 1,100 x 10,800 mm, weight approx.: 2,800 kg
Description: Machine number: 175808 Operating voltage: 400 V Frequency: 50 Hz Heating connection: 14.9 kW Pump motor: 30 kW Total connection: 44.9 kW Clamping force: 1600 kN Screw diameter: 50 Platen dimensions: 780 x 700 mm Approx. Onsite Dimension. (l x w x h): 5,000 x 1,800 x 2,100 mm, weight approx.: 6,600 kg
Description:  , Series No. 166967 closing force ,850 kN max. approach force 37 kN max. opening force 37 kN max. opening travel 375 mm min. mold installation height ,250 mm max. platen distance 625 mm clear tie bar spacing 320 x 320 mm mold mounting platen 490 x 490 mm Injection unit screw diameter 30 mm max. screw travel 150 mm Approx. Onsite Dimension. (l x w x h): 4,300 x 1,900 x 2,000 mm, weight approx.: 2,700 kg
Description: Clamping force: 1,000 kN Screw diameter H: 20 mm Screw diameter V: 18 mm incl. turntable, deposit conveyor, Wittmann handling robot Internal number: A 100/2 2K M2358 SN: 227275 Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 6,700 kg
Description: Internal number: A 100/1 2K M2357 SN: 226901 Clamping force: 1.000 kN Screw diameter H: 20 m  ,Screw diameter V: 15 mm incl. turntable, deposit conveyor, Wittmann handling robot Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 6,700 kg
Description: Machine number: 211355 Operating voltage: 400V Frequency: 50Hz Control voltage: 230 V Rated current: 80 A Total rated current: 118 A Total connection: 62 kW Closing force: max. 1100 kN Closing force: max. 50 kN Opening force: max. 34/255 kN Opening distance: max. 500 mm Tool installation height: at least 250 mm Distance between the clamping plates: max. 750 mm Light column spacing: 470 x 470 mm Tool platens: 637 x 637 mm Weight of movable tool halves: max. 760 kg Ejector force: max. 40 kN Ejector path: max. 175 mm Screw diameter: 30 mm Effective auger length: 20 Snail travel: max. 120 mm Calculated displacement volume: max. 85 cm³ Shot weight: max. 77 g PS Material throughput: max. 13.5 kg/h PS Spray pressure: max. 2000 bar Injection flow: max. 236 cm³/s Screw torque: max. 250 Nm Nozzle contact force: max. 50 kN Nozzle lifting path: max. 210 mm ...
Description: Closing unit: , closing force 1000 kN, ,random force 50 kN Opening stroke 500 mm Mold mounting height 250 mm Distance between the clamping platens 750 mm Light column spacing 420 x 420 mm Ejector force 40 kN, ejector stroke ,175 mm Injection unit: screw diameter 35 mm, effective screw length 20 l/d, screw stroke 150 mm Stroke volume 144 cm³ Injection part weight 132 g Injection pressure 1820 bar Approx. Onsite Dimension. (l x w x h): 4,600 x 1,600 x 2,000 mm, weight approx.: 3,200 kg
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø x 40 mm SN 52331 -Heating power: 350 W -Voltage: 230/250V -Number: 1x heating tape available -Price per piece -Dimensions: 200/130/H40 mm -Weight: 0.2 kg
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø50 x 34mm -Heating power: 310 W -Voltage: 220V -Number: 1x heating tape available -Price per piece -Dimensions: 220/80/H40 mm -Weight: 0.2 kg
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø65 x 130 mm -Item No.: 27.485 -Heating power: 1050 W -Voltage: 230/250V -Number: 2x heating tape available -Price per piece -Dimensions: Ø105 x 130 mm -Weight: 1.1 kg
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø65 x 175 mm -Item No.: 14.587 -Heating power: 1400 W -Voltage: 230V -Number: 3x heating tapes available -Price per piece -Dimensions: Ø105 x 175 mm -Weight: 1.4kg
Control, circuit boards, spare parts for Arburg, injection molding machines -Type: ARB 389 D KPL -Weight: 0.5 kg
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table: comes from an injection molding machine -Make: Arburg -Type: -Dimensions table: 735 x 665 mm -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 735/665/H185 mm -Weight: 230 kg
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: Ø 320 mm -Bore center: Ø mm -Dimensions: 320/320/H163 mm -Weight: 20 kg
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: 490 x 490 mm -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 490/490/H400 mm -Weight: 236 kg
This ARBURG 320 C 500-100 + Multilift H with B-Axis Injection moulding machine was manufactured in 2003 in Germany. It has a clamping force of 500 kN and a screw diameter of 30 mm. The distance between platens is 550 mm and the opening stroke is 350 mm. In total it operated 64000 pump hours. The injection moulding machine comes with a Multilift H with B-Axis, featuring a handling weight gripper plus part weight of max. 5 kg and a swivel range B-axis of 90 degrees. See original tech specs (DE) attached as PDF below.
This ARBURG Allrounder 570 H 2000-1300 HIDRIVE Injection Moulding Machine was manufactured in 2014 in Germany. It has a clamping force of 2000 kN and is equipped with thermoplastic cylinder of 60mm with long barrier screw (open nozzle 60 mm, nozzle tip radius 15, heating tape for open nozzle). In addition it features a servoelectric mold height adjustment with automatic clamping force control, a central clamping platen set à 125 mm, a maximum installation dimension increased to 650 mm and injection pressure increased by 10% (max. 2500 bar depending on screw). See overview of full configuration attached as PDF (DE) below. Important remark: The injection unit is leaking, there is a cost estimate from Arburg for approx. 15,000 euros net including assembly. This defect has not yet been rectified as the machine is not currently being used. The sale does not include the housing, any hoppers ...
This ARBURG Allrounder 630S 2500-800 injection moulding machine was manufactured in May 2016. It offers a robust 2750kN clamping force, with a hydraulic drive system and precise control features, including 18 hot runner control zones. Key specifications include 45mm screw diameter, a 318cm³ dosing volume, 2470 bar maximum injection pressure, and a 242 cm³/s injection speed, ensuring high performance and consistent quality in production. Furthermore, its equipped with a Multilift Select robotic system, enhancing automation and efficiency in handling. The ARBURG Allrounder machine we have for sale is tailored for high-volume and intricate moulding operations. It is in very good condition, and has low hours (only 4507 automatic hours) as it was mainly used as technical center machine for sampling and tryouts. Contact us for more information about this injection moulding machine. See origi ...
This Arburg 370 S 600-290 U Injection moulding machine was manufactured in the year 2022 in Germany. It is new, never used and still in original packaging. With a clamping force of 600 kN, 290 injection unit and screw diameter of 35mm (armored, highly wear-resistant screw) it is a compact, fully hydraulic clamping system - ideal for reliable and precise reproducibility in injection moulding operations. The closing unit can be tilted from horizontal to vertical. To be considered that machine comes without position control.
This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with an ARBURG SELOGICA control unit. The machine has a clamping force of 800 kN and a screw diameter of 30-40 mm.