número máximo de resultados excedió > 1000
por favor refinar su búsqueda
Modelo
(Fabricante: JACK)
Description: The set includes 1/2' impact wrench Straight grinder 1/2' pneumatic ratchet Jackhammer (2 types) Angle grinder + grindstone Chisels Suitcase Allen key Drill key Approx. Onsite Dimension. (l x w x h): 400 x 300 x 200 mm, weight approx.: 15 kg
Description: Working size 20 - 100/105 mm - General conditions: the peeling head has been completely overhauled / according to the attached images, the system has been completely checked/cleaned. The plant has been completely checked/cleaned / the entry rollers are present but need to be checked/adjusted accordingly / the roller table in the exit area needs to be replaced. - Important note: the plant is equipped with a chip transport system. PLANT DISMANTLED WITHOUT DOCUMENTS For transport, the following are required: 4 hydraulic jacks weight approx.: 18,000 kg, Approx. Onsite Dimension. (l x w x h): 15,000 x 6,000 x 3,000 mm
Description: Cogeneration plant for the electricity production from renewable sources The machine was created to be fueled with vegetable oils of rapeseed, sunflower and soybean oil, but thanks to the complex heated introduction system, it can burn animal fats and palm oil. The hourly production of electricity is equal to 940 kw/h The machinery is composed of: power source ,with fuel heating before combustion (underground tanks excluded) WÄRTSILÄ NSD 6R22/26 engine, produced in 1999 with a power of 1,065 kw at 1,000 rpm (power reduced to 940 kw/h to comply with authorisations) alternator DENOX system control panel catalytic silencer with cover and chimney chiller for cooling and heating systems hot water generation system with heat exchanger for powering warehouse heating systems transformer room ,with control panels, Landis+Gyr E650 meter, MESSINA SVT/R+AC/R medium ...
Screw jack, screw jack, clamping device, Atlas screw jack, threaded screw jack, clamping tool, threaded support, -Adjustment: via trapezoidal thread -Adjustment range: 120 - 175 mm -Price: for every 2 pieces -Weight: 4 kg
Screw jack, screw jacks, clamping devices, Atlas screw jack, threaded screw jack, clamping tool, thread pad, -Adjustment via trapezoidal thread -Adjustment range: 295 - 530 mm -Quantity: 1 piece -Weight: 9kg
Pneumatic demolition hammer, single-arm hammer, pneumatic hammer, jackhammer, chisel hammer -Number: 5x demolition hammer available -Price: per piece -Dimensions: 360/220/H80 mm -Weight: 6 kg
Linear drive, linear gear, screw jack, spindle drive -comes from a Homag edge banding machine -difficult execution -Adjustment path: 100 mm -Number: 2 pieces available -Price: complete for 2 pieces -Dimensions: 250/230/H800 mm/piece -Weight: 66 kg/piece
Hoist, car lift, hoist, hoist, pit jack, axle free jack, truck hoist -Manufacturer: MWH Märkisches Werk Halver, truck lifting device pit jack -Type: Atlas LT -Load capacity: 2x 5000 kg -Lifting height: 1600 mm -Operating pressure: 60 bar -Accessories: incl., see photos -Transport dimension: 1000/940/H1400 mm -Total weight: 820 kg
Lifting jack, swivel jack, lifting jack, shackle, load lifter -Various sizes: see pictures -4x: 15 to -4x: 15 to -8x: 5 to -4x: 10 to -different sizes: on shackles - Total number: 30 pieces -Price: complete -Weight: 168 kg
Pipe vise, pipe jack, Ror vise, plumbers vise, pioneer -Max. Clamping range: Ø 75 mm -with: shelf -Number: 1x pioneers available -Price: per piece -Dimensions: 1300/900/H160 mm -Weight: 20 kg
Crank winch, Dunkraft, diamond jack, steel winch -Hexagon socket: 32 mm -with: counterweight -Dimensions: 730/400/H110 mm -Weight: 9.8 kg
Linear drive, linear gear, screw jack, spindle drive -unused: from warehouse liquidation -Travel: 550 mm -Motor mount: Ø 19 mm -Dimensions: 13/130/H1000 mm -Transport dimensions: 200/200/H1100 mm -Number: 3x linear bearings available -Price: per piece -Weight: 14 kg/piece
Frame formwork, pipe hangers, manhole ring hangers, manhole frame lifters, manhole ring lifters, channel ring lifters -Manufacturer: Zagro, hydraulic manhole frame jack type HK 6 -4 lifting cylinders -transport wheels -Dimension: 1400/1120/H1020 mm -Weight: 169 kg
Linear drive, linear gear, screw jack, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis -Festo: mini slide 170587 JN02 -Stroke: 50 mm -Dimensions: 123/65/H40 mm -Weight: 0.7 kg
Crank winch, Dunkraft, diamond jack, steel winch -Load capacity: 10 t -Safety crank -self-locking gear -with profiled head-claw -with a solid claw -Weight: 50 kg
Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Height adjustable: 320-390mm -Number: 24x feet available -Price: piece -Dimensions: Ø 360/H370 mm -Weight: 41kg/pcs
Hand hydraulic pump, hand pump, hydraulic cylinder, pot winch, hydraulic winch, Hydralite Jacks -Max. Lifting force: 100 tons -Hydraulic cylinder stroke: 160 mm -Number: 2x cylinders available -Number: 1x cylinder as a spare part carrier (without pump) -Price: complete -Dimensions: 400/240/H370 mm -Weight complete: 104 kg
Linear drive, linear gear, screw jack, spindle drive -unused: from warehouse liquidation -Linear drives: with toothed belt -unused: from warehouse liquidation -ravel: 1230 mm -without motor -Dimensions: 500/550/H1900 mm -Number: 5x linear drives available -Price: per piece
Linear drive, linear gear, screw jack, spindle drive -unused from warehouse liquidation -Manufacturer: Festo -Type: DGP - 40 - 730 PPV - A - B -161782 W208 -P: max. 8 bar -Number: 3x drives available -Price: per piece -Weight: 7 kg / piece
Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servo motor, -Manufacturer: Swedrive, screw jack type AL 25 -Translation: i = 16.5 -Spindle stroke: 250 mm -Shaft: Ø 30 mm -Motor: Siemens 075 kW / 1395 rpm -Dimensions: 440/485/H160 mm -Weight: 26 kg
Screw jack, screw jack, clamping device, Atlas screw jack, threaded screw jack, clamping tool, thread washer -Adjustment: via trapezoidal thread -Adjustment range: 100 - 145 mm -Price: for every 2 pieces -Weight: 4.5 kg
Jack stand, assembly trestle, steel trestle, welding table, assembly table, work trestle, screw trestle -Support stand: steel stand with screw spindle -Adjustable height: 620 - 980 mm -Quantity: 1 piece available -Dimensions: 510/460/H620 mm -Weight: 31kg
TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Jäckle, water-cooled TIG welding machine -Type: TIG 301i DC -Welding power: max. 300 A, see nameplate -Cooling device: KG 2 -Accessories: including ground cable, hose package -Dimension: 730/620/H1180 mm -Weight: 73kg
Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120-25 -Stroke: max. 1310 mm -pneumatic: operated -p max.: 8 bar -Dimensions: 90/90/H1660 mm -Weight: 12 kg
Linear drive, linear gear, screw jack, spindle drive -Manufacturer: Norgren -Type: M/46025B/M/320 -Stroke: 320 mm -Piston: 25 mm -Dimensions: 520/70/H60 mm -Weight: 1.6 kg
Jack, car jack, jack, bottle jack, mechanical jack, axle jack -Handover: in the current condition as seen -Grab handle: repaired, see photos -Manufacturer: Osaka, mechanical jack 50 ton -Stroke: 130mm -Piston: Ø 87 mm -Number: 1x lifting jack available -Price per piece -Dimensions: 270/220/H290 mm -Weight: 31 kg/pc.
Jack, car jack, jack, bottle jack, mechanical jack, axle jack -Manufacturer: Holmatro, mechanical jack 50 ton -Type: JJ-5013 -Stroke: 125 mm -Shaft: Ø 87 mm -Number: 3x lifting jack available -Price per piece -Dimensions: 280/220/H295 mm -Weight: 30 kg/pc.
Linear drive, linear gear, screw jack, spindle drive, linear unit, linear guide, linear axis -Manufacturer: Rose Krieger, linear slide -Type: 301500000460 335374/60 -Travel: 320 mm -Dimensions: see drawing with the pictures -Price: per piece -Number: 4 Stück -Dimensions: 490/95/H60 mm -Weight: 3 kg/piece
Linear drive, linear gear, screw jack, spindle drive -Pneumatic linear drive -Festo type: DGO -. -Stroke: 490 mm -Shaft: Ø 22 mm -Dimensions: 42/42/705 mm -Weight: 1.05 kg
Crank winch, Dunkraft, diamond jack, steel winch -Manufacturer: Pfaff, steel winch type 0104000 -Load capacity: 1.5 t -Lifting height: 0.35 m -Number: 4x winch available -Price per piece -Dimension: 740/120/140 mm -Weight: 10.3 kg / pc.
Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Height adjustable: 590 - 645 mm -Number: 3x feet available -Price: complete -Dimensions: Ø 410/H600 mm -Weight: 93 kg/piece
Jack, car jack, jack, bottle jack, mechanical jack -Manufacturer: Osaka, jack lifting cylinder 50 ton -Stroke: 130mm -Shaft: Ø 87 mm -Number: 15x lifting jack available -Price per piece -Dimensions: 310/235/H290 mm -Weight: 30 kg/pc.
Screw jack, screw jacks, clamping devices, Atlas screw jack, threaded screw jack, clamping tool, thread pad, -Adjustment via trapezoidal thread -Adjustment range: 375 - 605 mm -Quantity: 1 piece -Dimensions: 185/185/H375 mm -Weight: 19.3kg
Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Load lifter: 4 pieces, holder Ø 80 mm -Shackle: M24 2 pieces per part -Price: complete -Dimensions: 250/155 / H250 mm -Weight: 36 kg / pc.
Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Lashing eyes: attachment points, 40 pieces -Material: stainless steel, 10 thick -Dimensions .: 100 x 48 x H110 mm -Eyelets: 60 x 30 mm -Bores: Ø 18 mm -Price: complete -Total weight: 31 kg
Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Lashing eyes: attachment points, 43 pieces for screwing or welding -Material: stainless steel -Dimensions .: 100 x 138 x 10 mm -Eyelets: 60 x 30 mm -Bores: Ø 18 mm -Price: complete -Weight: 32 kg
Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Manufacturer: Matrinor, load racks lashing points 4 pieces -Original use: aerospace industry -Payload: 9840 kg -Shackle mount: Ø 120 mm / M42 -Price: complete -Dimensions: 555/252 / H175 mm -Weight: 62 kg / pc.
Hoist, car lift, hoist, lifting device, pit jack, axle free jack, truck hoist, axle jack, free jack -Manufacturer: RAV Ravaglioli, axle lift pit jack -Type: unfortunately without nameplate/ techn. Data -Load capacity: 2x kg -Lifting height: 240 mm -Jacking points: adjustable, center approx. 770 to 1220 mm -Pit width: adjustable, approx. 780 to 1050 mm -Dimensions: see photos -Transport dimension: 890/370/H245 mm -Total weight: 83 kg
Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 7 pieces, 220 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 4 pieces with shäkel -Price: complete -Dimensions: 450/350 / H220 mm -Weight: 42 kg / pc.
Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.
Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Lastbock: with foldable rotatable load bracket -Type / load capacity: see photo -Base plate: 260 x 200 x 20 mm -Tube: 100 x 100 x 210 mm -Bores: Ø 16 mm -Number: 4x load jack available -Price per piece -Weight total: 15 kg / pc.
Annular space seal in link chain design, pipe sealing cushions -Various: diameter -suitable: as wall duct, tank embedding and jacket pipe seal -Transport dimensions: 600/500/H350 mm -Weight: 35 kg
Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Lastbock: with foldable rotatable load bracket -Type / load capacity: see photo -Base plate: 260 x 200 x 20 mm -Tube: 100 x 100 x 270 mm -Bores: Ø 16 mm -Number: 4x load jack available -Price per piece -Weight total: 16 kg / pc.
Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Manufacturer.RUD, load bracket thread with foldable rotatable load bracket -Type: VLBG 4.0 t M 24 -Base plate: 160/150 / H45 mm steel -Bores: Ø 17 mm -Number: 8x load jack available -Price per piece -Weight total: 9 kg / pc.
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer -Manufacturer: jacket, three-phase transformer -Type: DAT 2.2 kVA -Primary: 380 V 3.6 A -Secondary: 115 V 11.0 A. -Dimensions: 265/145/H225 mm -Weight: 31 kg
Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread, lashing point -Hersteller.RUD, Loadbock thread with foldable rotatable load bracket unused Ovp -Type: VLBG 5 t M 30 Ident-No .: 850 08 13 -Carton: content 4 pieces -Quantity: 12 cartons available -Price: per box -Weight: 15 kg / box
Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120 SO -Stroke: max. 500 mm -Piston: Ø 40 mm -pneumatically operated -p. Max. Pressure 8 bar -Number: 8x cylinders available -Price: per piece -Dimensions: 800/70/H100 mm -Weight: 5 kg
Hydraulic oil tank, hydraulic oil tank, hydraulic tank -Hydraulic reservoir: from Butler 1200 pallet jack -Content: approx. 11 ltr. -Add-on parts: see photos -Dimensions: Ø 210 x 580 mm -Weight: 11 Kg
Mobile motor jack crane, mobile pillar jib cranes, mobile pillar jib crane, assembly cranes, assembly cranes, workshop cranes, workshop cranes, pillar jib cranes, indoor cranes, workplace cranes -Transportable engine jack -incl.: manual trolley -with: cable -Load capacity: kg -Projection: 2,000 mm -Total height: max. 2,850 mm -Number: 1x available -Price: per piece -Transport dimensions: 1640/1515/H1585 mm -Own weight: 190 kg
Crank winch, Dunkraft, diamond jack, steel winch -Price: for both winches -Load capacity: 10 to -Safety crank -Number: 2 pieces available -Price: per piece -Gear: self-locking -with head-claw lifting height: 920-1120 mm -with fixed claw lifting height: 220-420 mm -with large foot: 620 x 620 mm -Weight: 222 kg