número máximo de resultados excedió > 1000
por favor refinar su búsqueda
Modelo
(Fabricante: JACK)
Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...
Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), stainless stee ...
Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...
This Karl Schnell creaming tanks is a part of a production line for sterilised processed cheese spreads. They serve for controlled viscosity increase following the sterilisation process, in order to achieve optimum spreading characteristics. Double jacketed. Max volume: 750 liter, effective volume: ± 600 liter. Scraper agitator that goes along the wall, motor: 2,2 kW - n1 1450 - i 75,02 - n2:19 rpm. 2x opening lids on the top. CIP spraybowls. Manual outfeed valve in the center of the bottom. 3 feet, 2x fixed and 1 with load cell. Instruction manual and technical drawings available., Excluding:, - Control panel., Type of Machine: Creaming tank, Volume: 750 liter, Inside Diameter: 98 cm, Inside Height: 100 cm, Agitator type: Scraping agitator that goes along the wall, Motor of agitator: 2,2 kW - 230/400 V - 50 Hz - n2: 19 rpm
Double jacketed, isolated, process tank, previously used in a dairy factory as cream tank. Pressure in the jacket 3,5 bar. Pressure in the tank: ATM. Central placed propellor agitator with 2x big blades (diameter 1.280 - 1.600 mm) for gentle treatment of the product (cream). Motor agitator: 2,6/4,4 kW. Aearator on top of the tank (ATM). Manhole on top of the tank. Porthole with light on top. CIP bowls for cleaning inside the tank. Temperature probe and level ruler with interior float. 3 Stainless steel legs. Outlet in the bottom, 450 mm height, with outlet valve (76 mm connection). Cylindrical height: 3.100 mm. Total dimensions: Ø 3.100 x 5.800 mm. Tank already dismantled out of the factory and located in an outside warehouse in France., Type of Machine: Process tank, Volume: 20.000 liter, Double jacketed: Yes, Insulation: Bottom, Type of agitator: Central placed propellor agitator with ...
Double jacketed, aseptic tank, previously used in a dairy factory for the storage of sterilized UHT milk. Pressure in the jacket: ATM. Pressure in the tank: -1 / 3.5 Bar. Allowable temperature in the jacket: 20 / 150 °C. Allowable temperature in the tank: 20 / 150 °C. Total capacity of the jacket: 3.015 liter. Total capacity of the tank: 40.224 liter. Surface of the jacket: 33 m2. Group Fluide: 2. Category: III. 3 stainless steel legs. No agitator. Manhole on top of the tank. CIP bowls for cleaning inside the tank. Outlet in the bottom, 730 mm height, with outlet of 76 mm. Stairs on the outside. Cylindrical height: 3.000 mm. Inside diameter: 3.500 mm. Total dimensions: Ø 3.684 x 6.081 mm. Weight: ± 7.000 kg. Construction drawing available. CE labelled., Sterile tank available because complete factory is closed., Sterile tank already dismantled and located outside on cradles., Type of ...
WB-Busser Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating/cooling on the jacket including all valves, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 2x mixing blades, max working pressure in the bowl 1,5 bar (protected with overpressure valve), max temperature in the bowl 127 °C, vacuum connection on the bowl, dearation connection on the bowl, open infeed hopper (3 liter) with valve for adding powders, water dosing system with Endress & Hauser flowmeter, opening of the lid with pneumatic cylinder, scraper of the wall is electric driven (0,75 kW - ± 25 rpm), 2 manual tightening clamps. Main motor for the cutting knife: 380 Volt - 50 Hz - 18,5 kW - 300 till 3.000 rpm. Vacuum pump (30 m3 ...
This creaming tank is a part of a production line for sterilised processed cheese spreads. They serve for controlled viscosity increase following the sterilisation process, in order to achieve optimum spreading characteristics. Double jacketed. Open top with cover. Max volume: 350 liter, effective volume: ± 300 liter. Scraper agitator that goes along the wall. Small simple control panel for start/stop pump and agitator. Including outfeed lobe pump, Waukesha 064 U1 model, serialnr 241620, year 1999, motor 1,1 kW., Type of Machine: Creaming tank, Volume: ± 350 liter, Inside Diameter: 75 cm, Inside Height: 140 cm (50 cm cylindrical + 90 cm conical), Double jacketed: Yes, Insulation: No, Type of agitator: Scraping agitator that goes along the wall, Outfeed pump: Waukesha 064 U1
Closed stainless steel butter silo. Single jacketed. The horizontal buffer silo is equipped with 2 augers (driven by 1 main motor of 4.0 kW - 380 V - 8,9 Amp). Total capacity: ± 3.000 kg. Manhole of 400 x 500 mm on one side and a sight glass on the same side. 3x infeed possibilities for direct connection of the outfeed pipe from a Continuous Butter Machine (CBM) / adding the pipe of a reworker on the other side and 1x at the back. CIP cleanable with 2x spraybowls in the top. Breather on top. Outfeed plate with 2x DN100 product connection on the outfeed of the silo. Renewed stainless steel control panel (2018, VSTechniek) with frequency converter, on/off switches and speed regulation control. Electric scheme available. Including 1x outfeed rotary lobe pump, Alfa Laval - LKM, type 2130A, serial number: 155891/01C, motor: 1,1 kW - 1455 / 39 rpm and 1x CIP return centrifugal pump, Hilge, HY ...
Isolated, process tank, previously used as in a dairy factory as CIP tank. Volume 10.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole on top of the tank. CIP bowls (3x) for cleaning inside the tank. Small coil inside. Agitator connection but without agitator itself. 3 Stainless steel legs. Outlet in the bottom, 500 mm height, with pneumatic outlet valve. Cylindrical height: 2.350 mm. Total dimensions: Ø 2.450 x 4.200 mm., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 10.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, 440 mm, Number of feet: 3x, Internal height: 2.350 mm, Total outsid ...
Isolated, process tank, previously used as in a dairy factory as CIP tank. Volume 10.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole on top of the tank. CIP bowls (3x) for cleaning inside the tank. Small coil inside. Agitator connection but without agitator itself. 3 Stainless steel legs. Outlet in the bottom, 500 mm height, with pneumatic outlet valve. Cylindrical height: 2.350 mm. Total dimensions: Ø 2.450 x 4.200 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 10.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, 440 mm, Number of feet: 3 ...
CIP tank. Volume 2x 5.000 liter (1x compartment of 10.000 liter dividend in 2x compartments). Pressure in the tank: ATM. Aearator on top of the tank. Manholes on the side (oval 450 x 300 mm) and on the top (400 mm diameter) of the tank (1x for each compartment). CIP bowls for cleaning inside the tank. 3 Stainless steel legs. Outlet in the bottom, 110 mm height. Cylindrical height: 3.000 mm. Total dimensions: Ø 2.300 x 4.100 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 2x 5.000 liter, Double jacketed: No, Insulation: No, Material: SS 304, Type of agitator: No agitator, CIP Spray bowls: Yes, Manhole: Yes 2x pieces, one in each compartment, Number of feet: 3, Internal height: 3.000 ...
Isolated, process tank, previously used as in a dairy factory. Volume 47.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole at the side of the tank (manhole cover excluded). CIP bowls (3x) for cleaning inside the tank. Agitator connection flange at the side on the bottom but without agitator itself. 6 Stainless steel legs. Outlet in the bottom, 400 mm height. Cylindrical height: 4.070 mm. Total dimensions: Ø 3.900 x 5.700 mm., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 2x tanks, stocknumber: #917 / #918., Type of Machine: Process tank, Volume: 47.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, but manhole cover excluded, Number of feet: 6x, Internal height: 4. ...
Isolated, process tank, previously used as in a dairy factory. Volume 47.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole at the side of the tank (manhole cover excluded). CIP bowls (3x) for cleaning inside the tank. Agitator connection flange at the side on the bottom but without agitator itself. 6 Stainless steel legs. Outlet in the bottom, 400 mm height. Cylindrical height: 4.070 mm. Total dimensions: Ø 3.900 x 5.700 mm., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 2x tanks, stocknumber: #917 / #918., Type of Machine: Process tank, Volume: 47.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, but manhole cover excluded, Number of feet: 6x, Internal height: 4. ...
Complete processed cheese packaging line existing out of a double-head automatic dosing / wrapping machine designed for the packaging of triangular portions of processed cheese, carton boxing machine and a banderol machine. The working process starts with the formation of the wrapping shells from reel-fed heat sealing aluminium foil for subsequent filling of processed cheese in the dosing station of the machine. A lid of heat sealing aluminium foil is placed inside the filled shell which is then folded over the lid and sealed by heated pressure pads. Each portion includes an internal ‘consumer-friendly’ easy opening tear strip and an external paper brand label. The portions are finally gathered in an 8 bundle configuration and carried onto the outfeed conveyor on a single lane. From here it is moved to the cartonising machine, adding the 8 portions in a carton box, adding a lid on th ...
General SKU060C271 LocationBarneveld MakeHoeksma & Velt Leeuwarden No.907-407 Year of construction1989 Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume1400 Ltr. Motor4 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity1400 Ltr Vessel sizesdia. 800x2750mm Dished bottomcheck Dished top sidecheck Top connections6x dia. 25mm + dia. 80mm Outletdia. 25mm With jacketcheck Max. temperature120 Degr. C. With propellor stirrer(3x Turbine stirrer on one shaft) Motor4,0 KW, 380/660 Volt (Ex) Stainless Steel Reactors MaterialStainless steel 1.4401 (316) Information Floorspace1,2x1,2 M Total height5,0 M Weight1100 KG ATEX compatiblecheckMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSolid pharmaceuticsRubberLubricants & oleoOther chemicalStainless Steel ...
General SKU202T023 LocationBarneveld MakeLoedige TypeMGT 600 G-1 MZ Mach.No.7965 Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor30 KW Specified Features - Universal mixer MaterialMild steel, Stainless steel Universal mixercheck Capacity600 ltr With covercheck Inlet150 mm Pneumatic operated outlet200 mm Max. temperature110 Degr. C With motor30 kW Information Year of construction1976 Total height1,7 m CEcheck Floorspace1,9x1,2 m Weight3200 kg Extra SpecificationsControl cabinet, 220-380 volt, :Universal mixersLoedigeMixers > Universal mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...
General SKUR0823 LocationBarneveld MakeCMR Brevetti Ravinet (Ita) Type16900 ltr Mach.No.1998 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Motor15 KW Surface8 m2 Specified Features - Nutsche filter MaterialStainless steel 1.4435 (316L) Nutsche filter/dryercheck Filter surface8 m2 Capacity16900 ltr Vessel sizesdia.3300 x 2250mm Top connections2x DN600, DN200, 4x DN80, 2x DN40 Solids outletDN100 Liquid outlet10x DN40 With jacket(70 ltr) Max. temperature-30/200 degr.C With stirrercheck Motor15 kW, 380 Volt (EX) Stirrer speed8 rpm Cake capacity4000 Ltr Stirrer can be liftedcheck Information Year of construction1988 Total height5,0 M Floorspace4,0x4,0 M Weight8000 Kg ATEX compatiblecheckMinerals & inorganicAPIBiopharmaceuticalAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnolog ...
General SKU323S578 LocationBarneveld MakeConstructiebedrijf verkouille TypeASME VIII DIV1 No.A0202 Year of construction2002 Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume4500 Ltr. Motor3 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 Stainless Steel Reactors Reactorcheck Capacity4500 Ltr. Vessel sizesdia. 1600x2665 mm Dished bottomcheck Dished top sidecheck Manhole600 mm Top connections3100, 500, 500, 500, 100, OutletDN 100 Half coil jacketedcheck Max. temperature-20 °C/ 160 °C With paddle stirrercheck Motor3 kW 220/300 Volt Information Total height5 m Weight3000 kg Floorspace2x2 mMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSolid pharmaceuticsRubberLubricants & oleoOther chemicalStainless Steel ReactorsFine chemicalsOr ...
General SKUR0371 LocationBarneveld MakeGPI Tanks & Process Equipment Type30 m3 vacuum steam distillation vessel No.317233-10 Year of construction2018 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume29900 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity29.900 Ltr (working volume 25.400 Ltr) Vessel sizesdia. 2500x6975mm Dished bottomcheck Dished top sidecheck Top connections(11x) Outletdia. 80mm Internal heating spiral(5x 80 Ltr) Max. temperature-20/+220 Degr. C. With paddle stirrerfabr. Jongia Motor7,5 kW, 400 Volt Ex de IIB T4Gb Atex Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information Total height8,3 M Weight6.850 KG (vessel weight without agitator) CEcheck Floorspace2,9x2,9 M Extra Specific ...
General SKU300U586 LocationBarneveld MakeAeromatic-Fielder TypeGP SP 1 Mach.No.02313 Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Specified Features - Universal mixer MaterialStainless steel 1.4306 (304L) Universal mixercheck Capacity3-7,5-10Ltr. With covercheck Inletdia. 15 mm Pneumatic operated outletcheck With jacketcheck Max. temperature0-85°C With motorcheck 3,0kW With variable speed drivecheck Rotor speed2-1500rpm With lump breakercheck 0,3kW With motorcheck Rotor speed1000-3000rpm Information Year of construction2002 Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,2x0,8 m Total height1,5 m Weight600 kg ATEX compatiblecheck Extra SpecificationsThis very comprehensive general process unit has many additional components, including multiple pans and stirrers. This unit features a microwave func ...
General SKU404U1212 LocationBarneveld MakeEdelstahl Maurer No.208.09.006-27 Year of construction2009 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume167 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity167 Ltr. Vessel sizesdia. 500x868 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket18 Ltr. Max. temperature-15/150 °C With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, 1385 rpm, (Ex) Speed mixing shaft187 rpm Stainless Steel Reactors MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information Floorspace0,75x0,75 m CEcheck Total height1,5 m Weight310 kg Extra SpecificationsRa ≤ 0,6 µm Minerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemica ...
General SKU323T844 LocationBarneveld MakeNetzsch TypeLME 50 No.204 600 Year of construction1979 Main Features MaterialStainless steel Volume50 Ltr. Motor36 KW Specified Features - Sand mill MaterialStainless steel Horizontal sand millcheck Capacity50 Ltr. Housing dimensions dia. 300x950mm Inlet25 mm Outlet35 mm With mechanical sealcheck With jacketcheck Motor± 36 kW, 380 Volt Information Total height2,25 m Weight1380 kg Floorspace1,9x0,9 mSand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU069C433 LocationBarneveld MakeDalton Corp. Japan Type5-DMV No.0211 Year of constructionunknown Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume3 Ltr. Specified Features - Planetary mixer Planetary mixer(1x) 1 Mixing/kneading shaftcheck With scrapercheck Motorcheck With covercheck With pan(1x) Capacity3,0 Ltr (useful) Pan sizesdia. 200x150mm With jacketcheck With electric heatingcheck With manual operated liftingcheck MaterialStainless steel Information With switchcheck Floor space0,7x0,6 M Total height1,0 M Weight150 KGPlanetary mixersDalton JapanMixers > Planetary mixersBrand > Dalton Japan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...
General SKU223N081 LocationBarneveld MakeEWAC B.V. Broek op Langedijk No.26455-039 Year of construction1996 Pressure Working pressure3 Bar Working pressure jacket3 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure3 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4401 (316) Capacity1000 ltr Vessel sizesdia. 750x2210mm Dished topcheck Dished bottomcheck Top connectionsdia. 300mm + dia. 100mm + dia. 32mm Outletdia. 100 mm With jacketcheck Max. temperature145 degr. C Information Mounted on legscheck Floorspace1,0x1,0 m Total height2,8 m Weight620 kgPressure vesselsEwacTanks > Pressure vesselsBrand > Ewac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ma ...
General SKU404U1213 LocationBarneveld MakeEdelstahl Maurer No.208.09.006-01 Year of construction2009 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume130 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity130 Ltr. Vessel sizesdia. 500x668 mm Top connectionsDN50 (2x) Outletdia. 33 mm With jacket11 Ltr. Max. temperature-15/150 ºC With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, (Ex) Speed mixing shaft187 rpm Stainless Steel Reactors MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information Floorspace0,75x0,75 m CEcheck Total height1,4 m Weight270 kg Extra SpecificationsRa ≤ 0,6 µm Minerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSolid pharmaceuticsRubberLub ...
General SKU323T843 LocationBarneveld MakeNetzsch TypeLME 50 No.204 909 Year of construction1980 Main Features MaterialStainless steel Volume50 Ltr. Motor36 KW Specified Features - Sand mill MaterialStainless steel Horizontal sand millcheck Capacity50 Ltr. Housing dimensions dia. 300x950mm Inlet25 mm Outlet35 mm With mechanical sealcheck With jacketcheck Motor± 36 kW, 380 Volt Information Total height2,15 m Weight1380 kg Floorspace1.9x0,9 mSand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU310T741 LocationBarneveld MakeWinkworth Typeunknown missing type plate Main Features MaterialStainless steel Volume20 Ltr. Motor3 KW Specified Features - Z-blade mixer Z-blade mixercheck (mixtruder) Capacity20 ltr. Trough sizes355x355x420 mm With covercheck With jacketcheck Double gearedcheck With adjustable packing glandscheck Motor3,0 kW 315 Volt (2x) Arm speed33 rpm Screw dischargecheck (mixtruder) Motor3,0 kW MaterialStainless steel Information Mounted on framecheck Floorspace1,3x1,6 m Total height1,6 m Weight1250 kgMinerals & inorganicPlastic & polymersDyes & pigmentsSolid pharmaceuticsOther feedRubberZ-blade mixersAnimal feedLubricants & oleoOther chemicalStarchSugarCosmeticsOther pharmaceuticsDetergent & surf.Powdered foodsPaints & coatingsPaper & otherFeed additivesOils & fatCatalysts & fillersWinkworthIndustries > Chemical > Minerals & inorg ...
General SKU280P459 LocationBarneveld MakeSTAWAG Chemieapparate - Anlagebau und Projectierung (CH) TypeFUNDA LRA-0.5m2 -10-300-40-400 No.WA-9256.0 Year of construction1986 Pressure Working pressure6 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.5 m2 Cake15 Ltr. Specified Features - Horizontal plate filter Plate filtercheck Filter surface0.5 m2 Number of platens10 Platen sizesdia.300mm Between the plates40mm Solids outletDN150 Liquid outletDN25 With jacket(10 Ltr) Max. temperature150 degr,C. Motor1,1 KW, (EX) Stirrer speed/filter speed 800 rpm Cake capacity15 Ltr MaterialStainless steel 1.4435 (316L) Information Total height1,7 M ATEX compatiblecheckHorizontal plate filtersFundaFilters > Horizontal plate filtersBrand > Funda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to n ...
General SKU307S485 LocationBarneveld MakeCampen Machinery A/S (DK) TypeAN 200500 No.02 03 350 Year of construction2002 Main Features MaterialStainless steel Motor5.5 KW Rotor240 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 240x400mm Inletdia. 40mm Outletdia. 45mm With jacketcheck Motor5,5 kW 400 volt With Monopumpcheck MaterialStainless steel Information Mounted on wheelscheck With switch(as is) Weight1000 Kg CEcheck Floorspace2,4x1,7 M Total height1,9 M Extra SpecificationsIncludes a spare mono pump Foam mixersCampen Machinery A/SMixers > Foam mixersBrand > Campen Machinery A/S What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...
General SKU300U602 LocationBarneveld MakeDiosna TypeP-50 Main Features MaterialStainless steel Volume50 Ltr. Motor2.5 KW Specified Features - Universal mixer MaterialStainless steel 1.4306 (304L), Stainless steel 1.4571 (316Ti) Universal mixercheck Capacity45 Ltr. (max 50 Ltr.) Vessel sizesdia. 540 mm With covercheck Inletdia. 220 mm Manual operated outletcheck Outletdia. 120 mm With jacketcheck With motorcheck 1,5/2,2 kW 380 Volt (Ex) Rotor speed144/288 rpm With lump breakercheck With motorcheck 2,5 kW 380 Volt Rotor speed1500/3000 rpm Information Floorspace1,6x0,6 m Total height1,7 m Weight400 kg ATEX compatiblecheckUniversal mixersDiosnaMixers > Universal mixersBrand > Diosna What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...
General SKU087F445 LocationBarneveld MakeUnimix Haagen & Rinau Bremen No.865 3814 Year of construction1988 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume5.5 Ltr. Specified Features - Processing vessel MaterialStainless steel Closed stirring vessel(1x) Capacity5,5 Ltr Vessel sizesdia. 245x165mm (conical vessel) With covercheck With jacket(3 Ltr), With electric heating Max. temperature133/150 Degr. C. (vessel/jacket) With anchor stirrerscraper stirrer (motor 370 Watt) With homogenisercheck Motor900 Watt, 220 Volt (1 Ph) Information With switchcheck Floorspace0,8x0,5 M Total height1,0 M Weight200 KG Technical specs Extra informationconical vesselProcessing vesselsUnimix H&RProcessing vessels > Processing vesselsBrand > Unimix H&R What you can expect from Foeth: -- Machine is in work ...
General SKU074S263 LocationBarneveld MakeSeitz Wega TypeEFT 30.52 Mach.No.13449 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Motor0.75 KW Surface0.1 m2 Specified Features - Nutsche filter Nutsche filter/dryer(1x) Filter surface0,07 M2 Capacity55 Ltr. Plate sizesDia. 300mm Vessel can be tiltedcheck With jacket(15+0,5 Ltr.) With stirrercheck Motor0,6/0,75 KW, 380 Volt, Ex With variable speed drivecheck Stirrer speed5-25/10-50 Rpm Stirrer can be liftedcheck MaterialStainless steel 1.4571 (316Ti) Information Year of construction1982 Mounted on framecheck Floorspace1,9x1,3 M Total height2,7 M Weight850 KgMinerals & inorganicAPIBiopharmaceuticalAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAnimal feedLubricants & oleoOther chemicalStarchF ...
General SKU088X452 LocationBarneveld MakeWerner & Pfleiderer TypeUK-14-X (fixed trough) No.89802 Year of constructionunknown Main Features MaterialMild steel/Stainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Z-blade mixer Z-blade mixer(1x) Capacity200 Ltr (useful) Trough sizes745x690x570mm With covercheck With jacketcheck Single gearedcheck With adjustable packing glandscheck Motor5,5 KW, 380 Volt (Ex) Bottom outletdia. 75mm (2x) MaterialMild steel, Stainless steel Information Floorspacewithout motor 2,2x1,0 M Total height1,6 M ATEX compatiblecheckMinerals & inorganicPlastic & polymersDyes & pigmentsSolid pharmaceuticsOther feedRubberZ-blade mixersAnimal feedLubricants & oleoOther chemicalStarchSugarCosmeticsOther pharmaceuticsDetergent & surf.Powdered foodsPaints & coatingsPaper & otherFeed additivesOils & fatCatalysts & fillersWerner & Pfleiderer ...
General SKU319N469 LocationBarneveld MakeDVA Deutsche Vakuum Apparate TypeRWN 1200-Z Year of construction1983/94 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Motor2 KW Surface1 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface1,0 m2 Capacity750 ltr (500 ltr nett) Vessel sizesdia.1300mm x 700mm Solids outletschroef dia.100mm With jacket15 Ltr Max. temperature120 Gr.C. With stirrercheck Motor2,0 KW, 380 Volt (Ex) Stirrer can be liftedhydraulic MaterialStainless steel 1.4581 (348) Information Mach.No.132 527 10 Mounted on framecheck Floorspace2,5x2,5 M Total height3,5 M ATEX compatiblecheckMinerals & inorganicAPIBiopharmaceuticalAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAnimal feedLubricants & oleoOther chemicalStarchFine chemicals ...
General SKUR1166 LocationBarneveld MakeDe Dietrich & CIe (FR) Type1000 Ltr No.22014 Year of construction1990 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume1000 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (3009) Capacity1240 Ltr (nett.1000 Ltr) Vessel sizesdia. 1000mm x1810mm Dished topcheck Dished bottomcheck With covercheck Top connectionsDN200 (2x), DN100 (2x), DN80 (2x) OutletDN80 Max. temperature-30/120 Degr. C. With jacket(82 Ltr) Max. temperature-30/120 Degr. C. With propellor stirrercheck Motor0.75 kW, 230/400 Volt (EX) Speed mixing shaft317 rpm Information Total height2,8 M Weight1500 Kg Floorspace1,4x1,4 M ATEX compatiblecheckPressure vesselsDe DietrichTanks > Pressure vesselsBrand > De Dietrich What you can expect from Foeth ...
General SKU201P101 LocationBarneveld MakeThaletec GmbH Thale (DE) TypeRWA BE 1600-1400AM-D100 No.627323/1 Year of construction2008 Material Lining materialGlass - Enamel Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume2330 Ltr. Motor5.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity2330 Ltr Vessel sizesdia.1500mm x1400mm Dished bottomcheck Dished top sidecheck Manholedia.500mm Top connections(5x) dia.100mm, (2x) dia.200mm Outletdia.100mm With jacket(330 Ltr) Max. temperature-25 / 200 Degr.C. With propellor stirrercheck Motor5,5 KW, 400 Volt (Atex II 2G EEx de IIC T4) ) Speed mixing shaft24-120 rpm Information Floorspace1,8x1,8 M Total height4,0 M Weight3000 KGMinerals & inorganicAPIGlass-lined ReactorsPlastic & polymersBiopharmaceuticalDyes ...
General SKU044U253 LocationBarneveld MakeEurofiltec Rungis TypeFC-660AC No.54054/050443 Year of construction1995 Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Surface2.5 m2 Specified Features - Horizontal plate filter Plate filterClosed plate filter (1x) Filter surface± 2,5 M2 Number of platens8 Platen sizesdia. 660mm, Vessel capacity 160 Ltr With jacket(35 Ltr) Max. temperature-20/+140 Degr. C. With hydraulic drivecheck Motor1,5 KW, 220/380 Volt (Ex) MaterialStainless steel 1.4404 (316L) Information Mounted on framecheck With switchcheck Floorspace1,6x1,3 M Total height2,0 M ATEX compatiblecheck Technical specs Extra informationVessel capacity 160 LtrHorizontal plate filtersEurofiltecFilters > Horizontal plate filtersBrand > Eurofiltec What you can expec ...
General SKU285S352 LocationBarneveld MakeL.B. Bohle Maschinen und Verfahren GmbH (D) TypeVacumat VMA 300 EX vacuum mixer Mach.No.9201497/1 Main Features MaterialStainless steel Volume240 Ltr. Motor15.9 KW Specified Features - Universal mixer MaterialStainless steel Universal mixercheck Capacity90-240 ltr. Vessel sizesDia: 840x550mm With covercheck Pneumatic operated outletcheck OutletDia: 200mm With jacketcheck With motor15,9 kW 380 volt Rotor speed5-220 rpm With lump breakercheck With motor2,2 / 6,5 kW 380 volt Rotor speed1500 rpm Information Year of construction1992 With switchgear(as is) Floorspace2,4x2,1 M Total height2,9 M Weight3400 Kg Extra Specificationsincluding Leybold Sogevac SV200 B 960502 vacuum pump Universal mixersBohleMixers > Universal mixersBrand > Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...
General SKU237S137 LocationBarneveld MakePignat (FR) Type25 Ltr No.20403081 Year of construction2004 Main Features MaterialGlass Volume25 Ltr. Motor0.37 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity25 ltr. Vessel sizesdia. 290x500mm Dished bottomcheck Dished top sidecheck Outletdia. 15mm With jacketcheck Max. temperature150 degr. C Counter rotating stirrercheck Motor0.37 kW 230/400 Volt (2x) Speed mixing shaft137 rpm / 60 rpm Glass Reactors MaterialGlass Information Mounted on legscheck With switchgearcheck Weight200 Kg CEcheck Floorspace1,0x0,8 M Total height1,8 MMinerals & inorganicAPIGlass-lined ReactorsPlastic & polymersBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsBiotechnologyRubberLubricants & oleoOther chemicalFine chemicalsCosmeticsOther pharmaceuticsDetergent & surf.OintmentsGeneric medicinesPaints & coatings ...
General SKUR1179 LocationBarneveld MakeEstrella Ag (CH) Type2500 Ltr No.89680 Year of construction1992 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume2500 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass Capacity2660 Ltr (2500 Ltr nett) Vessel sizesdia. 1365x1650mm Dished topcheck Dished bottomcheck Manholedia. 600mm Top connectionsDN100 (4x) DN200 (1x) OutletDN100 Max. temperature-10/200 degr. C With jacket(152 ltr) Max. temperature-10/200 degr. C With propellor stirrercheck Motor1 kW 220/380 Volt (Ex) Pressure vessels Closed vertical tankcheck Capacity2660 Ltr (2500 Ltr nett) Dished topcheck Dished bottomcheck With jacketcheck With propellor stirrercheck Motorcheck Information Total height3,0 M Weight1900 Kg Floorspace2,1x2,1 M ATEX compati ...
General SKU092A453 LocationBarneveld MakeDrais TypePMV-25 RL (RL=Lochscheiben-Rührwerk) No.53418 Year of construction1989 Material Disc materialMild steel Pressure Working pressure1 Bar Working pressure jacket3 Bar Main Features MaterialMild steel Volume26 Ltr. Motor24 KW Specified Features - Sand mill Vertical sandmill(1x) Capacity26,0 Ltr Housing dimensions dia. 230x580mm With jacketcheck Motor24,0 KW, 380/660 Volt (Ex) CapacityMax. 750 Ltr/Hr With pumpcheck Motor0,75 KW, 220/380 Volt (Ex) With variable speed drivecheck MaterialMild steel Information With switchcheck Floorspace1,6x0,9 M Total height2,3 M Weight1400 KG ATEX compatiblecheckSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...
General SKU274K293 LocationBarneveld MakeFryma Maschinenbau GmbH Rheinfelden TypeMSZ-12 No.M-12360 Year of construction1986 Pressure Working pressure2.5 Bar Main Features MaterialMild steel Volume0.5 Ltr. Motor2.2 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity0,5 Ltr With mechanical sealcheck With jacketcheck Rotor jacketed2 bar Motor2,2 KW, 220/380 Volt (Ex) Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck Motor0,08 KW, 220/380 Volt (Ex) With variable speed drivecheck Information With switchcheck Floorspace0,7x0,6 M Total height0,8 M ATEX compatiblecheckSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...
General SKUCW001 LocationBarneveld MakeVMA-Getzmann GmbH TypeDispermat SC115 No.A1006476 Year of construction04/2022 Pressure Working pressure jacket3.5 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor15 KW Specified Features - Sand mill MaterialStainless steel 1.4552, Stainless steel 1.4571 (316Ti) Vertical sandmillcheck Basket Mill Capacity300 Ltr. Housing dimensions Dia. 330x160 mm InletDia. 690 mm OutletDia. 65 mm With sievecheck With jacketcheck 39,8 Ltr. Max. temperature90°C Motor15kW, 400/600Volt, 1465 rpm Rotor speed100-2000 rpm. With ballscheck 6 packages. size ceramic beads: 1,0-1,2 mm(5x) and 1,4-1,6 mm (1x) Information Mounted on framecheck With switchgearcheck Total height2,7 m Weight± 1250 kg CEcheck Floorspace1,7x1,5 m Extra SpecificationsThis Dispermat is equipped with the modular TML 100 basket mill. The housing of the ba ...
General SKU404U1220 LocationBarneveld MakeAlbi Alois Binderberger No.1634 Year of construction1999 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Stainless Steel Reactors ReactorBioreactor Capacity2500 Ltr. (max. 3400 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature130 °C With propellor stirrercheck (magnetic) Motor1.1 kW Speed mixing shaft1400 rpm Information Floorspace1,85x1,85 m Total height2 m Weight1350 kgStainless Steel ReactorsAlbi Alois BinderbergerReactors > Stainless Steel ReactorsBrand > Albi Alois Binderber ...
General SKU201P112 LocationBarneveld MakeBOLZ GMBH No.M 1107 T 4402 Year of construction1988 Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume11800 Ltr. Motor15 KW Specified Features - Conical mixer Conical mixercheck Capacity11800 Ltr (gross) Largest cone diameter2900 mm Cone height4900 mm Dished topcheck Manholedia.600mm With stainless steel armcheck Top drivecheck Motorscrew +/- 15 KW Motorarm 1,5 KW, 230/400 Volt Cantilevered screwcheck With jacket1200 Ltr. (20m2) Max. temperature100 Degr.C MaterialStainless steel Information Floor space3,2x3,2 M Total height6,5 M Weight+/- 7000 KGMinerals & inorganicPlastic & polymersDyes & pigmentsSolid pharmaceuticsConfectioneryOther feedAnimal feedOther chemicalStarchFine chemicalsSugarCosmeticsOther pharmaceuticsGeneric medicinesPowdered foodsConical mixersPaints & coatingsFeed addi ...
General SKU201P013 LocationBarneveld MakeWinkel Schweisstechnik GmbH TypeW-KF-12-40-DOE No.WS-5166 Year of construction2012 Pressure Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Surface2.4 m2 Specified Features - Candle filter MaterialStainless steel 1.4571 (316Ti) Candle filtercheck Notified bodytuv Filter surface2,4 m2 Number of candles12 Candle sizes40 Liquid outletDN40 Max. temperature-10/140 degr.C. Top connectionsDN50 Capacity110 Ltr Vessel sizesdia.330mm x1340mm Information Mounted on legscheck Floorspace0,7x0,7M Total height2,05 M Weight180 KG Extra Specifications(no filters) Technical specs Extra informationcandle length 40Candle filtersWinkelFilters > Candle filtersBrand > Winkel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ...
General SKU316S530 LocationBarneveld Makeunknown Typeunknown No.unknown Year of constructionunknown Main Features MaterialStainless steel Volume300 Ltr. Specified Features - Vertical tank MaterialStainless steel Closed vertical tankcheck Capacity300 Ltr. (nett. 240 Ltr.) Vessel sizesdia. 600x1100 mm With covercheck Dished bottomcheck Manholedia. 180 mm Top connectionsdia. 63 mm Outletdia. 22 mm With jacketcheck Without motorcheck Information Mounted on legscheck With switchas is Weight450 kg Floorspace1,2x1,2 m Total height2,1 mVertical tanks-Tanks > Vertical tanksBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR1170 LocationBarneveld MakeEstrella AG (CH) Type1000 Ltr No.84169 Year of construction1985 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume1000 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel Capacity1280 Ltr (nett.1000 ltr. ) Vessel sizesdia.1000mm x1810mm Dished topcheck Dished bottomcheck With covercheck Top connections2x DN200, 2x DN100, 3x DN80 OutletDN80 Max. temperature-30/100 degr.C. With jacket(135 Ltr) Max. temperature-30/100 degr.C. Information Total height2,1M Weight1100 Kg Floorspace1,4x1,4 MPressure vesselsEstrellaTanks > Pressure vesselsBrand > Estrella What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are ...
General SKU041H138 LocationBarneveld MakeFryma Maschinen GmbH Rheinfelden TypeMSM-12 No.L-14038 Year of construction1993 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Vertical sandmillCoBall mill (1x) Capacity± 0,5 Ltr Housing dimensions dia. 140x90mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor3 kW, 380 Volt (Ex) With variable speed drivecheck Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck With variable speed drivecheck Information With switchcheck With switchgearcheck (as is) Floorspace0,9x0,6 m Total height0,8 m Weight220 kg ATEX compatiblecheckSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...