trabajo con chapas de metal usadas para la venta (3,250)

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 25 mm: 25 mm: 16 mm: 20 mm: 18 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 16 mm: 16 mm: 10 mm: 13 mm: 11 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

Auction-ID: A7-47533-166

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mm Machine in a well-maintained condition () with only approx. 31.800 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=PBV-MDtZnlEEquipment:- CNC electro-hydraulic press brake- DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display Tool & program library USB keyboard and mouse interface- CNC controlled axes: Y1 + Y2  ...

sheet width: 3050 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmwork height max.: 930 mmno. of strokes: 9 - 17 Hub/mincutting angle: 0.5 - 3.0 °down holder: 18 StückControl: SC 90 engine output: 22.0 kWweight of the machine ca.: 9500 kgrange L-W-H: 4270 x 2200 x 2250 mm Good / well-maintained condition () Current list price approx. 80.000 euros Features:- Electro-hydraulic / slide-guided guillotine shear - HACO CNC control model SC 90 Preset positioning of the backgauge Digital display of actual position Electro-hydraulic cutting angle adjustment Electro-hydraulic cutting gap adjustment LCD display Emergency stop switch- NC electro-motorized backgauge, on ball screws- Hydraulic hold-down devices- Front finger guard- Ball bearings in the support table Support table with recessed handles- 1x side stop, with mm scale- 1x front support arms- 1x freely movable foot switch- Rear s ...

Rodable Peso máximo de la bobina: 1000 kg Ø máximo 1000 mm Ø min 290 mm / 540 mm Auction-ID: A1-47842-8

Con pedal, sobre base metálica, hecho por mí mismo. Auction-ID: A1-47842-273

Con pedal, sobre base metálica, hecho por mí mismo. Auction-ID: A1-47842-272

: neu : ca. 10 Wochen ab Auftrags : Türkei : 34200 €: 653.22 €: 100 mm: 315 mm: 3 : 7.5 kW: 7 m/min: 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm: 2000 mm: 1700 mm: 4000 kg3 hydr. driven rollsstrong welded steel constructionlower rolls hydr. adjustabledigital read-out for lower rollspositions on seperate control panellateral rolls adjustable in 3 axeshorizontal and vertical operationfor- and backward drivemachine and equipment according to theCE regulationsWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mmplate thickness: 6.35 mmthickness at Niro-steel: 4.00 mmcutting angle: 0.5 - 2.5 °cutting gap adjustment: 0.05 - 0.8 mmno. of strokes: 9 - 26 Hub/minback stop - adjustable: 10.0 - 750 mmdown holder: 22 Stk.oil volume: 200 ltr.engine output: 7.5 kWweight: 8000 kg.range L-W-H: 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours () Current list price approx. 60.000 euros Special price upon request Features:- Robust electro-hydraulic, slide-guided sheet metal shear- LVD control panel centrally located on the front of the machine (left)- Electro-hydraulic cutting angle adjustment Includes digital display of actual values- Manual cutting gap adjustment via handwheel from the front (left) Includes analog value display- Electro-motorized backgauge with ball screws Includes digital actual position display Rapi ...

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2600 €: 1 : 1 : 1050 mm: 1 mm: 56 mm: 1400 mm: 700 mm: 1120 mm: 185 kg3 Walzenasymmetric rolls - prebendinglongitudinal grooves in lower and lateral rollInfeed of the lower roller by a central lever - with gear reductionmachine standuser manual in GERMAN orENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-43902-243

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14700 €: 282.24 €: 1550 mm: 4 mm: 140 mm: 3,5 m/min: 2.2 kW: 2700 mm: 750 mm: 1000 mm: 1420 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS (PRICES ON REQUEST):hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-43902-233

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98600 €: 1863.54 €: 3100 mm: 16 mm: 16 mm: 13 mm: 16 mm: 14 mm: 12 mm: 300 mm: 300 mm: 240 mm: 50 mm: 1140 mm: 18.5 kW: 5310 mm: 1660 mm: 1140 mm: 11100 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-47818-892

Auction-ID: A7-47818-881

Auction-ID: A7-47818-869

: gebraucht : WA0043 : 129 €: 1 : 835 mmFase: 1 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Auction-ID: A7-47818-920

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 €: 242.5 €: 0.4 - 2 mm: 200 mm: 300 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 €: 530.98 €: 3030 mm: 4 mm: 4 mm: 2 mm: 180 mm: 4 kW: 4600 mm: 1120 mm: 1020 mm: 4250 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12150 €: 233.28 €: 0.4 - 2 mm: 100 mm: 200 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 4010 mm: 1.5 mm: 2 mm: 4 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTSmillmeter precise adjustment of the clamping beamBMS MULTI-Touchcontrolelectric powered rotary shearelectronic depth stopflexible material supportsinclined bending beamoptimized geometry of the clamping beamsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on requestPrices ex works Germany.Transport and commissioningat customers place on request.The data for this ad was created with ModulMWS - the software solu ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 47600 €: 909.16 €: 3100 mm: 2.5 mm: Hydraulisch : 135 °: 4300 mm: 1770 mm: 1890 mm: 4000 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29460 €: 562.69 €: 0.4 - 4 mm: 100 mm: 400 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la lámina: 6200 mm Grosor de la placa: 8 mm Garganta: 60 mm Distancia entre columnas: 6400 mm Ajuste del ángulo de corte: 0,5 bis 2 Consumo total de potencia: 13 kWweight de la máquina aprox. 19 t Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12100 €: 232.32 €: 2500 kg: 1300 mm: 450 mm: 550 mm: 600 mm: 50 mm: 80 mmmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlALTERNATIVES (PRICES ON REQUEST):Version with pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 31080 €: 593.63 €: 0.4 - 3 mm: 400 mm: 1200 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 070008 : prompt, Zwischenverkauf v : Deutschland : 1200 €: 1 : 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mm con freno Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.