trabajo con chapas de metal usadas para la venta (3,298)

Sin transpaleta Auction-ID: A1-46045-255

Auction-ID: A1-46045-66

: neu : ca. 8 Wochen ab Auftragse : Spanien : 36000 €: 687.6 €: 85 to: 500 mm: 5 : 40/15 bzw. 24x24 mm: 450x15 / 450x18 mm: 475 mm: 130x130x13 mm: 45/40 mm: 12 mm: 200x12 mm: 9.2 kW: 2300 mm: 1200 mm: 2100 mm: 2400 kghydraulic drive2 foot pedals for independant working on punching and section stationbending unit with 2 dies, V40 and V70flat steel stationWITH DEVICE FOR REDUCING DEFORMATIONangle iron station with round and square bar cuttinghydraulic downhold for flat- and angle stationtriangular notching station with table and gaugepunching station with table and gaugegauge 1000 mm with contact switch, for angle / flat steel stationoperating manual in German and EnglischThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45737-180

: neu : ca. 2 Wochen ab Auftragse : Italien : 2000 mm: 11 mm: 11 mm: 7 mm: 8 mm: 6.4 mm: 225 mm: 215 mm: 165 mm: 8 m/min: 3950 mm: 1200 mm: 1200 mm: 4450 kgHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top ...

: neu : ca. 4 Monate ab Auftragse : 1530 mm: 16 mm: 12 mm: 7 1/min: 3 °: 8 : 500 mm: 22.5 kW: 250 l: 950 mm: 2350 mm: 1400 mm: 2000 mm: 5200 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 8200 mm: 2 mm: 2 mm: 1.5 - 2 mm: 8 : 8 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic grip ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6200 mm: 1.5 mm: 2 mm: 1.5 mm: 7 : 7 : 1130 mm: 180 mm: 915 mm: 4 kW: 7380 mm: 1435 mm: 1980 mm: 3700 kg: 145 °hydraulic drivestandard controladditional rail on the bending beam2x foot pedalremoveable material supportsafety equipment accoring to the control rules BG GermanyOPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany.Transport and commissioningat customers place on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5760 €: 111.17 €: 3/4 26,9 mm, 1 33,7 mm, mm: 5 mm: 3 mm: 93 kgThe motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",)and notch pipes with an external diameterof 22 mm to 76 mm for sink outflows.Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution!The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.The data for this ad was created  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12700 €: 243.84 €: 1270 mm: 5 mm: 140 mm: 3,5 m/min: 2.2 kW: 2470 mm: 750 mm: 1000 mm: 1350 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS:hardened Rolls€ 1.500,-Motorised Back Roll (Power Rear Roll)€ 1.200,-Digital Read-Out€ 1.200,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Con pedal, sobre base metálica, hecho por mí mismo. Auction-ID: A1-45977-272

: neu : ca. 10 Wochen ab Auftrags : Spanien : 72800 €: 1375.92 €: 165 to: 610 mm: 5 : 40/30 bzw. 34/34 mm: 110 mm: 31 1/min: 750x20 / 400x30 mm: 205x205x18 mm: 60 mm: 16x58x110 mm: 15 kW: 2950 mm: 1600 mm: 2200 mm: 6300 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformation by diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmfast hydraulic, centring deviceoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISH(sample photos) OPTION ",KIT", € 970,--length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Further available models ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 39500 €: 754.45 €: 127 mm: 850 mm: 1200 mm: 850 mm: 720 kg: 80 cm³: 127 x 7,1 mm: 4 x 8,56 mm: 127 x 7,1 mm: 114,3 x 5,6 mm: 114,3 x 5,6 mm: 139,7 x 8,8 mm: 139,7 x 8,8 mm: 64 x 6 mm: 88,9 x 3,65 mm: 50 x 4 mm: 90 mm: 130 x 25 stehend, 130 x 6 mm: 700 mm: 36 mm: 10 mm: 0 - 0,75 U/min: 3.5 kWdigital read out for bending angle4 hexagonal tool holders (40, 50 80 and 110 mm)Possibility to bend left and rightUsers manaulTools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Con pedal, sobre base metálica, hecho por mí mismo. Auction-ID: A1-45977-273

: neu : ca. 12 Wochen ab Auftrags : Türkei : 97400 €: 1840.86 €: 2050 mm: 30 mm: 30 mm: 25 mm: 25 mm: 20 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 5000 mm: 2000 mm: 1900 mm: 11000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created with ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 32480 €: 620.37 €: 1550 mm: 9 mm: 9 mm: 7 mm: 7 mm: 5 mm: 180 mm: 180 mm: 150 mm: 1,5 / 6 m/min: 5.5 kW: 3900 mm: 1150 mm: 1250 mm: 3250 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT (PRICES ON REQUEST):infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad  ...

Rodable Peso máximo de la bobina: 1000 kg Ø máximo 1000 mm Ø min 290 mm / 540 mm Auction-ID: A1-45977-8

sheet width: 3060 mmplate thickness: 6,0 mmdistance between columns: 3060 mm: max. 730 mmcutting angle adjustment: ja °cutting gap adjustment: ja mmconnected load: 11,0 kWweight of the machine ca.: 5,1 tdimensions of the machine ca.: 4,0 x 260 x 2,55 mHydraulic guillotine shear with- ELGO control for backgauge- Cutting gap adjustment- Cutting length adjustment- Cutting line illumination- Side gauge- 2 support bracketsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la lámina: 2040 mm Grosor de la placa: 4,0 mm Distancia entre columnas: 2100 mm Diámetro del rodillo: 150 mm Consumo total de potencia: 7,0 kU Peso de la máquina aprox: 2,2 tDimensiones de la máquina aprox: 2,95 x 1,0 x 1,75 mm Máquina de flexión de chapa metálica con 3 rodillos - 2 rodillos accionados - Rodillo trasero eléctricamente ajustable - Curvatura cónica - Interruptor de pie - Dispositivo de parada de emergencia Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Grosor de la placa: 6 mm Longitud de la cuchilla: 200 mmangle ajustable de - a: Fest 90 Superficie graduable: 750 x 500 mm Presión: tPotencia total requerida: 3,0 kWweight de la máquina aprox.: 0,62 tdimensiones: 1,2 x 0,8 x 1,2 m Máquina combinada: bordes y muesca - interruptor de pie - Interruptor de parada de emergencia Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la lámina: 3000 mm Grosor de la placa: 16 mm Pre-curvado: Potencia total requerida: kWweight de la máquina aprox. : Dimensiones de la máquina aprox: m Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

sheet width: 2550 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 205 mmside roll diameter: ~ 195 mmControl: konv. oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 7.5 kWweight: 4500 kgrange L-W-H: 5000 x 1500 x 1300 mmFeatures:- Robust electro-hydraulic 3-roll bending machine- 3-roll concept offers a wide range of bending and rounding options- Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks- Diameters of up to 1.1 times the top roll diameter are possible- Forged and hardened rolls with a hardness of 53-55 HRC- Low-maintenance, stable machine design- Sturdy welded steel construction- Electro-hydraulic folding bearing for easy pipe removal- Pressure gauge / pressure indicator for the rolls- Safety device (safety lanyard with switch unit)- Operating instruc ...

weight max.: 1200 kgtable turning speeds: 80 - 1600 mm/min.roll diameter: 200 x 50 mmworkpiece diameter: 20 - 800 mmrange L-W-H: 520 x 470 x 390 mm Antriebrange L-W-H: dito mm Mitläufervoltage: 230 V / 50 Hzweight: 56.0 kg current new price approx. 3,000 euros special price on requestProduct description:- For processing cylindrical workpieces- Flat frame- Swivel castors with polyurethane coating- Clearly arranged operating elements- Infinitely variable speed- The control electronics are protected by a robust and. enclosed housing- With foot switch for start/stop- Drive with DC electric motors and gearboxThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mmplate thickness: 1,5 mm: 135 °: 100 mmtotal power requirement: 1 kWweight of the machine ca.: 965 kgdimensions of the machine ca.: 2680 x 640 x 1100 mmNEW PRICE: 9,990 EURODescription:- Foot operation enables positioning of the sheet metal with both hands- Workpiece clamping and bending process are motorized via a chain drive- Manual adjustment of the bending angle, reading of the angle on a scale ring- Many bending options with segmented upper beam- Precise movement of the bending beam via large flat guides- Heavy, robust welded constructionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45793-39

Auction-ID: A1-45793-27

Auction-ID: A1-45793-23

Auction-ID: A1-45793-25

Auction-ID: A1-45793-17

Auction-ID: A1-45793-16