trabajo con chapas de metal usadas para la venta (3,346)

sheet width: 3100 mmplate thickness: 6 mmvoltage: 380 Vcontrol: CYBELEC CybTouch down holder: 14 Stückcutting angle: 1,2 °total power requirement: 11 kWweight of the machine ca.: 6.300 kgdimensions of the machine ca.: 4000x2100x1640 mmEquipment:- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max. Traverse path, for longer cuts- 1x side stop- 2x front support arms- Ball casters in the front support table- hinged finger protection, with safety switch- BOSCH / HOERBIGER hydraulic system- SIEMENS electrical system- light barrier behind the machine (safety device)- foot switch- CE mark / declar ...

sheet width: 1015 mmplate length: 1015 mmplate thickness: 6,0 mmPunching capacity: 25 tpunch diameter: 88,9 mmtotal power requirement: 16 kWweight of the machine ca.: 12000 kgdimensions of the machine ca.: 4000 x 2320 x 2300 mmEquipment:- Tool changer with 20 positions- FANUC Series O-P control- Foot pedal- Operating instructions (English)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width: 850 mmtotal power requirement: 3,8 kW5 to. Schleicher reel- max load: 5 to- Belt width: 1500 mm- Belt thickness: 1 mm- Year of construction: 23/04/92- Voltage: 24/380 V 50 Hz- Power: 3,8 KWIncluding: Coil lifter, feed unit, control panel, hydraulic unit, control cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 26 tpunching cross-cut in cmm: 80 x 2,5 stroke: - mmtotal power requirement: 1,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 3 x 3 x 2,5 mNo. 1096:Revolver hole punch 26 to.EDEL, type SMO 26/660/12built 1973 with throat depth 660 mmWorking area: diam. 80 x 2.5 mmDrive power: 1.5 kWAccessories:12-station tool magazineVarious punches and diesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : Italien : 2000 mm: 11 mm: 11 mm: 7 mm: 8 mm: 6.4 mm: 225 mm: 215 mm: 165 mm: 8 m/min: 3950 mm: 1200 mm: 1200 mm: 4450 kgHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top ...

: neu : 2025 : 090089 : prompt, Zwischenverkauf v : Türkei : 8900 €: 171.77 €: 1 : 20 to: 185 mm: 200 x 12 mm: 480 x 1060 mm: 200 mm: 80 mm: 10 mm/s: 10 mm/s: 2.2 kW: 930 mm: 1150 mm: 480 mm: 1200 mm: 530 kgProgrammable stroke and retraction pointAdjustable speed and pressureManual jog operation and automatic operating modeHolding pins and tools hardened and ground3 holder pinsBending toolManual stop 400 mmFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 73200 €: 1383.48 €: 2050 mm: 20 mm: 20 mm: 16 mm: 16 mm: 12 mm: 280 mm: 280 mm: 220 mm: 1,5 / 5 m/min: 16.5 kW: 4350 mm: 1700 mm: 1850 mm: 8550 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT (PRICES ON REQUEST):infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for t ...

: 50 mm: 8,5 U/min: 100 kNroll diameter: 162 mmDrive: 1,5 kWrange L-W-H: 1100x800x1500 mmweight: 450 kgEquipment / Accessories:- Two driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- Footswitch- standard roller setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmno. of strokes: 12 - 24 Hub/mincutting angle: 1 ° 30 work height max.: 865 mmback stop - adjustable: 1.0 - 1000 mmdown holder: 20 StückControl: ENC 100 M column arm: 50.0 mmoil volume: 200 ltrtotal power requirement: 15.0 kWweight: 11460 kgrange L-W-H: 5230 x 2250 x 2150 mm New price ~ 50,000 euros () Special price on request-----------------------------------------------------------NC electro-hydraulic swing cut shears with DURMA ENC 100 M control manual cutting gap adjustment (eccentric) including pneumatic sheet holding device for thin sheet metal cuts-----------------------------------------------------------Equipme nt:- robust electro-hydraulic swing cut shears- including DURMA ENC 100M NC control unit Back stop pre-selection - X axis Quantity Cutting length limitation Pivoting operation, left front- Monoblo ...

: gebraucht : WA0127 : 1230 €: 1 : 2500 mm: 70 mm: 70 mm: 8/11/12/16/24/36 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0011 : 292 €: 1 : 835 mm: 80 mm: 12 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0012 : 292 €: 1 : 835 mm: 80 mm: 12 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate length: 1250 mmplate thickness: 8 mmPunching capacity: 220 kNNumber of working hours: 51.658 htotal power requirement: kWweight of the machine ca.: 11.050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mmworkpiece length: -- mmwork piece width: 12 mmrange of angles: 30/45/22,5/37,5/50 °weight of the machine ca.: 30 kgChamfering system UZ12 ULTRALIGHT - KIT 30° + 45°Maximum bevel width 12 mm with automatic feedThe UZ12 ULTRALIGHT is one of the lightest automatic beveling machinesadvance in the market. Thanks to its compact size and light weightit is not only suitable for workshops, but also for assemblies. TheMachine is equipped with the automatic feed and therefore does thisWorking with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength),Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kitfor any given angl ...

sheet width: 4100 mmplate thickness: 13,0 mm STpre-bending: 10,0 mm STdiameter of upper rolls: 360 mmside roll diameter: 250 mmdiameter of lower rolls: 330 mmtotal power requirement: 11,0 kWweight of the machine ca.: 16.000 kg.dimensions of the machine ca.: 6542 x 1677 x 1900 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solut ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7200 €: 138.96 €: 4 mm: 200 mm: 300 nm: 4 Stk.: 126 mm: 10 1/min: 1475 mm: 550 mm: 1200 mm: 460 kgreduction motor with brake systemmovement of rolls with foot pedaladjustable idle rollsteel shafts with bronze bushings4 set of rollscomplete with standuser manual in GERMAN or ENGLISHaccording to CE rulesALTERNATIVE (PRICE ON REQUEST):Version HIBKS 4,0 with hydraulic top roll adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 100 mmmaterial thickness: 15 mmno. of straightening rolls: 9 straightening feed: 7 m/mintotal power requirement: 0,75 kWweight of the machine ca.: 380 kgdimensions of the machine ca.: 710 x 920 x 1360 mmFeatures:- 5x driven lower rollers- 4x adjustable upper rollers- Max. cross-section approx. 800 mm²- Mobile use on casters- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0151 : 217 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1600 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 1 mmroll diameter: 56 mmdimensions of the machine ca.: 1600 x 700 x 1050 mmDomestic equipments:- Upper roller can be swung out manuallyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35.0 tplate thickness: max. 8.0 mmthroat: 830 mmdiameter of seal: max. 105 mmtable:: 1500 x 1200 mmwork height max.: 920 mmdie stroke: ca. 90.0 mmstrokes per minute: ca. 200 Pressure power: 220 baroil volume: 80.0 ltotal power requirement: 4.0 kWweight of the machine ca.: 3200 kgrange L-W-H: 1600 x 1800 x 1800 mmThe IS 35 hydraulic punching machine has been specially optimized for processing sheet metal and extruded parts. It stands out for its flexibility and manufacturing precision. The machines in the IS series are equipped with 35 metric tons of punching force.Features:- Electro-hydraulic punch press with long reach - Robust C-frame construction Solid cast or welded frame (C-shape) Extremely high punching precision Compact design = small footprint Hydraulic overload protection - Separate control unit - Single and continuous stroke selectable - Infinitely adjustable control ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 33000 €: 630.3 €: 2530 mm: 6 mm: 6 mm: 4 mm: 190 mm: 5.5 kW: 4250 mm: 1200 mm: 1150 mm: 3750 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 80 x 16 (d 1200) mmI-beam section - upend: 50 x 15 (d 1000) mmL-beam: 50 x 5 (d 1200) mmround material: 40.0 (d 800) mmbar material dia. max.: 70 x 2.0 (d 1600 ) mmsquare material: 80x30x3 (d 4000) mmchannels - flange: UNP 80 (d 800 ) mmbending speed: 4.4 m/minroll diam. toproll: 157 mmbore: 50.0 mmoil volume: 18.0 Litertotal power requirement: 1.1 kWweight: 485 kg Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- electro-hydraulic ring/profile bending machine- hydraulic bottom/side roller adjustment for extra small bending radii- bottom/side roller can be adjusted individually- 3x driven rollers- divided roller segments- digital position display of the bottom/side rollers Display with touchscreen function- hardened tool holder (42CrMo4)- machine base- 2x manually adjustable side guides- h ...

plate thickness: 4 mmcutting angle adjustment: 30-120 °table height: 900 mm: 407 weight of the machine ca.: 760 kgdimensions of the machine ca.: 1300x1000x1150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmcutting angle: 0.5 - 2.5 °no. of strokes: 8 - 25 Hub/minback stop - adjustable: max. 1.000 mmControl: SIEMENS Number of downholders: 13 Stk.oil volume: 300 ltr.engine output: 21.0 kWweight: 8700 kg.range L-W-H: 3950 x 2200 x 1900 mmFeatures:- Robust electro-hydraulic sheet metal shear Design: Circuit-guided- NC electro-motorized backgauge with SIEMENS NC control unit OP 7 Input of target and actual position values- NC electro-hydraulic cutting angle adjustment- Manual cutting gap adjustment, from the front via handwheel- Recessed grips in the front support table- Front finger guard- 1x long side fence- 1x long support arm- 1x freely movable foot switch- Original operating instructions (NL) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 4.5 mm: 4.0 mmroll length: 2050 mmmin. dia.: 210 mmroll diam. toproll: 140 mmweight: 1530 kgrange L-W-H: 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on requestFeatures:- Robust electromechanical bending machine- 2 central rollers driven by electric motors (top & bottom rollers)- Top roller manually swivels out, with hinged bearing- Includes tapered bending attachment- Freely movable control panel- Bottom roller manually adjustable via handwheel- Asymmetrical roller arrangement- Self-braking main motor- Safety device (safety tether with switch unit)- CE marking/Declaration of ConformityOptional equipment included in the price:- Hardened rollers- Motorized side roller adjustment- Digital position display for motorized adjustable side rollerThe data for this ad was created with Mo ...

sheet width: 3050 mmplate thickness: 10.0 mmthickness at Niro-steel: 6.0 - 8.0 mmdown holder: 13 Stückdistance between columns: 3070 mmcutting angle: 1.0 - 4.0 °no. of strokes: ~ 22 Hub/minControl: ELGO P8511 oil volume: 240 lvoltage: 400 Vtotal power requirement: 15.0 kWweight: 8000 kgrange L-W-H: 3550 x 2350 x 1900 mm good condition () from a maintenance workshopEquipment:- NC electro-hydraulic guillotine shears- heavy / stable welded construction (machine body)- NC ELGO digital control unit P8511- NC electro-motorized backgauge on ball screws- electro-hydraulic cutting angle adjustment Front analog cutting angle display- 1x stable side fence, with T-slot and mm scale- 3x stable support arms, with T-slot and mm scale- Ball castors in the work table incl. recessed grips- Front finger guard - can be folded up at the front- 1x freely movable foot switch- 2x front emergency stop button-  ...

sheet width: 2540 mmplate thickness: 2.00 mmthickness at Niro-steel: 1.25 mmno. of strokes: max. 63 Hub/mincutting angle: 1.13 Gradtable height: 750 mmtable width: 320 mmdistance between columns: 2620 mmback stop - adjustable: 5.0 - 550 mmControl: konv. engine output: 3.0 kWweight of the machine ca.: 1600 kgrange L-W-H: 3100 x 1980 x 1400 mmEquipment:- robust / motorized swing cut guillotine shears- break-proof, torsion-free steel welded construction- compact and clear machine design- manual back stop, with analogue display adjustable from the front stepless adjustment over the entire travel range- recessed grips in the support table- 1x hold-down bar- 1x side stop- 3x support arms- 1x freely movable foot switch- operating instructions (PDF) Special accessories included:- sheet metal holding device for thin sheet metal cutsThe data for this ad was created with ModulMWS - the software sol ...

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mm Machine in a well-maintained condition () with only approx. 31.800 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=PBV-MDtZnlEEquipment:- CNC electro-hydraulic press brake- DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display Tool & program library USB keyboard and mouse interface- CNC controlled axes: Y1 + Y2  ...

sheet width: 3200 mmplate thickness: 3.0 mm STthickness at Niro-steel: 2.0 mmOpening width / upper beam: 300 mmspeed: OW 40.0 mm/secBending beam adjustment: 80.0 mmspeed: BW 90.0 Grad/secwork height max.: 900 mmcontrol: MULTIBEND 5000 back stop - adjustable: 10 - 1550 mmaccuracy +/-: 0.1 mmair pressure: 5.0 barNumber of working hours: ca. 1.000 htotal power requirement: 2x 4.0 kWvoltage: 400 Vweight: 4400 kgrange L-W-H: 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours () good condition () Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=VP6emx4HTYM! Maximum flexibility when bending cassettes, boxes and profiles! High flexibility in bending part design! High productivity and throughput! Easy to useEquipment:- motorized universal swivel bending machine RAS 73.30 high-precision mechanics with  ...